BLACK DECKER BL2010BP 10 Speed Blender User Manual

BLACK DECKER BL2010BP 10 Speed Blender

Product Information

The 10-Speed Blender is a household electrical appliance that can blend or mix food items. The product comes in four different models, namely Bl2010BP, Bl2010RP, Bl2010WG, and Bl2010WP. The blender features a measuring cup lid insert (part # Bl2010WG-01) and a lid. The blades are sharp and must be handled carefully. The product is meant for indoor use only. The blender comes with a user manual that includes important safety instructions. The user manual also provides contact information for customer care services and authorized service centers.

Usage Instructions

Before using the blender, read the user manual carefully and follow all safety instructions. Here are the steps to use the 10-Speed Blender:

1. Place the blending jar upside down on a flat surface.
2. Put the gasket on top of the blade assembly.
3. Place the blade assembly with the gasket into the bottom opening of the jar with the blades facing down.
4. Add the food items to be blended into the jar.
5. Attach the lid to the jar.
6. Plug the blender into an electrical outlet.
7. Select the desired speed setting and turn on the blender.
8. After blending is complete, turn off and unplug the blender from the outlet.
9. Carefully remove the lid and pour out the blended mixture from the jar.
10. Clean the blender thoroughly after each use as per the instructions in the user manual.

Do not immerse the cord, plugs, or appliance in water or any other liquid. Keep the cord away from the edge of the table or counter. Do not let children use or operate the blender without adult supervision. Do not use attachments not recommended by the manufacturer. Save the user manual and follow all instructions to ensure safe and proper usage of the 10-Speed Blender. Please Read and Save this Use and Care Book.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions.
• To protect against risk of electrical shock do not immerse the cord, plugs, or appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contacting moving parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return the appliance to the nearest authorized service facility or call the appropriate toll-free number on the front of this manual for examination, repair or electrical or mechanical adjustment. Or, call the appropriate toll-free number on the cover of this manual.
• The use of attachments, including canning jars, not recommended by the manufacturer may cause fire, electric shock or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter.
• Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used, but must be used only when the blender is not running.
• Blades are sharp. Handle carefully.
• To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
• Always operate blender with cover in place.
• When blending hot liquids, remove center piece of two-piece cover.

SAVE THESE INSTRUCTIONS

This product is for household use only.

POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug lone blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent the removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
ELECTRICAL CORD

• A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
• Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use
• If a long detachable power-supply cord or extension cord is used, 1] The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance,
• If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and
• The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.
  Note: If the power supply cord is damaged, it should be replaced by qualified personnel; in Latin America, by an authorized service center.

The product may vary slightly from what is illustrated.

1. Measuring cup lid insert (Part # BI2010WG-01):
2. Lid:
   • White Glass BL2010WG (Part # BL2010WG-02)
   • White Plastic BL2010WP (Part # BL2010WP-02]
   • Black Plastic BL2010BP (Part # BL2010BP-02)
   • Red Plastic BL2010RP (Part # BL2010RP-02)
3. Handle:
4. Blending jar:
   • Glass BL2010WG: Glass, 42 oz. / 5 cups
   • (Part # BI2010WG-03)
   • Plastic BL2010WP: Plastic, 50 oz. / 6 cups (Part # Bl2010WP-03)
5. Gasket:
   • Glass (Part # BL2010WG-05], Plastic (Part # BL2010WP-05)
6. Blade assembly:
   • Glass (Part # BL2010WG-07], Plastic (Part # BL2010WP-07)
7. Jar base:
   • White Glass BL2010WG (Part # BL2010WG-08)
   • White Plastic BL2010WP (Part # BL2010WP-08)
   • Black Plastic BL2010BP (Part # BL2010BP-08)
   • Red Plastic BL2010RP (Part # BL2010RP-08)
8. Blender base:
9. Control panel:
   Note:   indicates consumer replaceable/removable parts

How to Use

This product is for household use only.
GETTING STARTED

• Remove all packing material and any stickers from the product.
• Remove and save literature.
• Please go to www.prodprotect.com/applica. to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING section of this manual.
• Wipe outside of appliance with a damp cloth: dry thoroughly.

BLENDER JAR ASSEMBLY

1. Turn blending jar upside down and place flat on a countertop or work surface.
2. Put gasket on top of blade assembly. Place blade assembly with gasket into the bottom opening of the jar with blades facing down.
3. Place jar base onto jar and rotate clockwise until it is tight (B).
4. Turn assembled jar right side up.
5. Place lid with lid cap onto blending jar.
6. Uncoil power cord from the storage area under the base.
   • Note: Do not plug in the cord.
7. Place jar assembly on base, making sure it is pressed firmly into place. (Jar base should not extend more than ⅛-inch above the rim at the top of the base.] (C).
8. Blender is now ready for use.

USING YOUR BLENDER

1. Make sure the appliance is OFF.
2. Place foods to be blended into jar.
3. Place lid on jar; make sure lid cap is in place.
4. Plug power cord into outlet.
   • Note: When in use, do not leave the blender unattended. When using hard foods, such as ice, cheese, nuts and coffee beans, keep one hand on the lid to keep blender in place.
5. Press the High or Low button; then select the speed that best suits your desired task. To switch speeds, press the High or Low button and the new speed desired. (See SPEED CHART on page 8.)
6. When blending thick mixtures, such as smoothies, power drinks and milkshakes press the Pulse button several times to begin the blending process. Press the Pulse button for no more than 5 seconds at a time. This helps break up the ice and distribute the ingredients.
7. Open the lid cap to add ingredients while the blender is running and drop ingredients through the opening (DJ. Important: Do not remove the lid while the blender is running.
8. When finished, press the Pulse/Off button. Make sure the blades have completely stopped before attempting to remove the blending jar from the base
9. To remove the jar, grasp the handle and lift it straight up. Do not twist the jar.
10. Remove lid to pour.
11. Always unplug the appliance when not in use

BLENDING TIPS AND TECHNIQUES

• Cut food into pieces no larger than ¾-inch for use in the blender.
• When preparing foods that have several different kinds of ingredients, always add liquid ingredients first.
• When ingredients splatter onto the sides of the jar or the mixture is very thick, press the OFF button to turn appliance off. Remove the lid and use a rubber spatula to scrape down the sides of the jar and to redistribute the food pushing food toward the blades. Replace the lid and continue blending.
  • Important: Blender should always have lid in place when in use.
  • Caution: Do not place blending jar on base when motor is running.
• The lid cap holds up to 1 oz. liquid and can be used as a measure and when addinq ingredients such as juices, milk, cream and liquor (E).
• When making bread crumbs, chopping nuts or grinding coffee beans make sure blending jar is completely dry.
• When using PULSE function use short bursts. Allow the blades to stop rotating between pulses. Do not use pulse for more than 2 minutes.
• Use the PULSE button to begin the blending process when preparing beverages that include ice cubes; this helps to produce a smoother texture.
• The PULSE function is helpful when short bursts of power are needed such as when preparing thick smoothies or milkshakes, chopping nuts or grinding coffee beans.
• It is helpful to begin the blending process on the lowest speed and then increase to a higher speed, if necessary.
• To stop blending, press the OFF button at any time
• When blending hot liquids always let them cool at least 5 minutes before blending. Before beginning to blend, remove the lid cap and put it back with the opened side tilted away from you. Cover lid with a cloth to avoid splattering and only use lowest speed. Do not blend more than 2½ to 3 cups at a time.
• DO NOT place any of the following in the blender:
• Large pieces of frozen foods
• Tough foods such as raw turnips, sweet potatoes and potatoes
• Bones
• Hard salami, pepperoni and hard sausages
• Boiling liquids (cool for 5 minutes before placing in blending jar)
• Several other don’ts:
  • Do not operate blender without the lid on the blending jar
• Do not store foods in the blending jar
  • Do not overfill the blender. (The blender is more efficient with less rather than more.)
• Do not use a pulse for more than 10 seconds at a time. Release the PULSE button; allow the blender to rest briefly, then continue.
• Do not run blender for longer than 30 seconds when using dry foods and 2 minutes when blending liquids. Scrape down sides on blending jar, if necessary and continue blending.
• Do not use if blender jar is chipped or cracked
• Tasks not recommended for the blender:
• Whipping cream
  • Beating egg whites
  • Mixing dough
• Mashing potatoes
  • Grinding meats
  • Extracting juice from fruits and vegetables

Speed cHaRT

pulse/off| •   Use for thick mixtures
loW
1) Fast clean| •   Combine drop of dishwashing liquid and hot water to clean blender
2) Stir/Mix| •   Prepare sauces

•   Remove lumps from gravies

•   Reconstitute frozen juices, drink mixes and condensed soups

•   Prepare salad dressings

•   Puree hot liquids

3) Blend| •   Mix puddings

•   Combine pancake and waffle batter or mixes

•   Beat eggs for omelets and custards

4) Grate| •   Grate hard cheeses and coconut

•   Make superfine sugar

•   Make cookie, cereal and bread crumbs

•   Grind coffee beans, spices and chocolate

5) Beat| •   Beat eggs for omelets and custards
HiGH
6) puree| •   Puree baby foods – fruits and vegetables

•   Blend protein drinks

7) crumb| •   Make cookie, cereal and bread crumbs
8) chop| •   Chop fruits and vegetables

•   Chop cooked meats

•   Chop nuts, coarse-to-fine

9) l iquefy| •   l iquefy frozen drinks
10) Smoothies / ice crush| •   Crush ice

•   Prepare smoothies and milkshakes

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service personnel.
CLEANING

1. Before cleaning, turn off and unplug appliance.
2. Lift blending jar by handle off power base.
3. Remove jar base by turning counterclockwise until loose.
4. Remove gasket and blade assembly.
5. Caution: Blades are sharp, handle carefully.
6. Remove lid and lid cap.
7. Wash removable parts by hand or in your dishwasher. Place jar on bottom
   rack and rest of parts on top rack only.

Important:

• Do not place jar parts in boiling liquids.
• Do not immerse base in liquid. Wipe base with damp cloth and dry thoroughly.
• Remove stubborn spots by rubbing with damp cloth and nonabrasive cleaner.
  • Note: If liquids spill onto base, wipe with damp cloth and dry thoroughly. Do
    not use rough scouring pads or cleansers on parts or finish.

QUICK CLEANING
For quick cleanup, combine 1 cup hot water and a drop of liquid dish soap in the blending jar. Cover and blend on Speed 1 for about 30 seconds. Discard liquid and rinse jar thoroughly.
STORAGE
For convenient storage, wrap the cord around the feet on the bottom of the blender base.

• © 2010 – 2011 Applica Consumer Products, Inc.
• R1 2010/8-9-26E/S

References

• prodprotect.com
• prodprotect.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>