CandyCare OTB00016 Touchless Smart Infrared Thermometer User Guide

CandyCare OTB00016 Touchless Smart Infrared Thermometer

PRODUCT OVERVIEW

3 Modes To Measure Temperature

Forehead Mode

• Step 1: Press the Mode Button
• Step 2: Choose an Adult or Child.
• Step 3: Point the temperature probe at the CENTER of the forehead with a distance of 0-1.18 inch (0-3 cm).
• Step 4: Press and release the Measure Button to receive your temperature reading.

In-Ear Mode

• Step 1: Remove the magnetic probe cover and fit the probe gently into the ear canal.
• Step 2: Press and release the Measure Button to receive your temperature reading.

Object Mode

Point the temperature probe at the object with a distance of 0.39-1.18 inches (1-3 cm).

ATTENTION

• ALWAYS keep the Infrared Sensor and the LCD Display CLEAN.
• For In-Home Use ONLY.
• WAIT at least 10 seconds between each measurement.
• The user and thermometer should be in the same room for 30 minutes before use.

MEASURING TIPS

• Children UNDER age 1: Gently pull the ear straight back.

• Children age 1 to Adult: Gently pull the ear up and back.

• NEVER force the thermometer into the ear canal.

• Pull the ear up and back. Then, guarantee the ear canal is straight. Finally, allow the infrared sensor ray to read the temperature.

3-Colored LED Fever Indicator

Using The Thermometer

Silent Mode
Press and hold the Measure Button for 5 seconds to switch to Mute/Un-mute (Silent Mode).
Memory Recording Data
Press and hold the Mode button for 5 seconds to enter Memory Recordings Mode. Press this button again to go through all 40 previously recorded temperature Memory Recordings one-by-one. If there is no value, a display will show “-”.
°C & °F Conversion
Open the Battery Cover and flip the toggle switch to change between °C and °F.
Batteries
Requires 2x AAA batteries to operate. However, batteries are NOT included.

Measure In-Ear Temperature

• The ear must be clean (no ear wax).
• Always take a temperature in the same ear.
• If the eyebrow or forehead is covered with hair, dirt, or sweat, you must clean it properly for a correct measurement.

Measure Forehead Temperature

• If the eyebrow or forehead is covered with hair, dirt, or sweat, you must clean it properly for a correct measurement.
• Do not hold the thermometer for a prolonged period of time since it is sensitive to ambient temperature.

Measure Object Temperature

• Simply point the infrared sensor at an object to accurately measure its temperature.

Features

• By Pressing a Button
  Receive quick, exact, and accurate measurements in only one second with the push of a button. Our infrared thermometer is equipped with an incredibly sensitive sensor and a potent microchip with memory recording capabilities. For data analysis, the last 40 readings are recorded.

• Irradiation Technology
  Modern infrared technology allows users to monitor forehead temperature precisely without making physical touch. You may rest assured that infrared is extremely precise, responsive, and fast. The measurement error is only 0.4 °F (0.2 °C).

• Digital Display
  Important information is displayed on a handy LCD screen, including the temperature, notifications, and trouble messages. Use day or night with the option to mute or unmute for infants or young children. ( Note: Green indicates safety, Orange indicates caution, and Red indicates a fever.)

• General Security
  Our infrared thermometer has high-level safety technology that enables it to turn off automatically after just 10 seconds of inactivity or standby. Our top priorities are user convenience and safety.

FAQ’s

How does the CandyCare Touchless Smart Infrared Thermometer work?

The thermometer uses infrared technology to measure the temperature of a person’s forehead without making contact. It emits infrared waves, which bounce off the person’s skin and are picked up by a detector. The thermometer then converts this information into a temperature reading.

Can the thermometer be used on children?

Yes, the CandyCare Touchless Smart Infrared Thermometer can be used on people of all ages, including children.

Does the thermometer require any special maintenance?

No, the thermometer does not require any special maintenance. Simply wipe the sensor with a soft cloth or cotton swab if it becomes dirty.

What is the measurement range of the thermometer?

The CandyCare Touchless Smart Infrared Thermometer can measure temperatures between 89.6°F and 109.2°F (32°C and 42.9°C).

How accurate is the thermometer?

The thermometer is accurate within 0.2°C or 0.4°F.

How far away should the thermometer be held from the person’s forehead?

The thermometer should be held 1 to 2 inches away from the person’s forehead.

Is it possible to take the temperature of an object with the thermometer?

Yes, the CandyCare Touchless Smart Infrared Thermometer has an object mode that allows you to measure the temperature of an object, such as a room or a surface.

How long does it take for the thermometer to display a temperature reading?

The thermometer can display a temperature reading within 1 second.

Is the thermometer FDA-approved?

Yes, the CandyCare Touchless Smart Infrared Thermometer is FDA-approved.

What happens if the thermometer is used in an area with high electromagnetic radiation?

The thermometer may display inaccurate readings if used in an area with high electromagnetic radiation.

Can the thermometer be used in Celsius or Fahrenheit?

Yes, the thermometer can be switched between Celsius and Fahrenheit by pressing and holding the mode button for 3 seconds.

Does the thermometer have a fever alarm?

Yes, the thermometer has a fever alarm that will sound if the temperature reading is above a certain threshold.

Video – Product Overview

Download The PDF Link:CandyCare OTB00016 Touchless Smart Infrared Thermometer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>