Compoka WH202A Wireless Headphones User Manual

Compoka WH202A Wireless Headphones

Product Information

The product is a pair of headphones with volume and music control, play/pause/answer/hang up/reject/redial functionality, and an EQ mode. The headphones come with a clear paired device option and a diagram for reference. The package includes headphones, a USB charging cable, and a user manual.

Product Usage Instructions

How to Pair
To pair the headphones with a device, follow these steps:

1. Turn on the headphones by pressing and holding the power button until the LED light flashes.
2. Enable Bluetooth on your device and search for available devices.
3. Select the headphones from the list of available devices.
4. If prompted, enter the passcode “0000” to complete the pairing process.

Clear Paired Device
If you want to clear the paired device list, follow these steps:

1. Turn off the headphones.

2. Press and hold the power button for 5 seconds until the LED
   light flashes red and blue alternately.

3. The paired device list is now cleared.

Volume Control/Music Control
The headphones have buttons for volume control and music control. To adjust the volume or control music playback, use the following buttons:

• Volume Up: Press the “+” button.
• Volume Down: Press the “-” button.
• Play/Pause/Answer/Hang up/Reject/Redial: Press the middle
  button.

EQ Mode
The headphones have an EQ mode that can be toggled on and off. To switch between EQ mode and normal mode, press and hold the middle button for 3 seconds. When EQ mode is enabled, the LED light will flash twice.

Charge the Headphones
To charge the headphones, follow these steps:

1. Connect the USB charging cable to the headphones.
2. Connect the other end of the USB charging cable to a power source.
3. The LED light will turn red when charging and turn off when fully charged.

Diagram

1. Multi-Function Button
2. LED Indicator
3. Volume Up/Next Track
4. Volume Down/Previous Track
5. 3.5mm Audio Interface
6. Type- C Charging Interface
7. Microphone
8. EO Button

Package List

• Wireless Headphones 1
• 3.5mm Audio Cable 1
• User Manual 1
• Charging Cable 1

Specification

How to Pair

Step 1:

Step 2:

When the headset is power off, press and hold the Multi-function Button until the indicator flashes blue and red alternately to enter the pairing mode. Turn on the Bluetooth of the mobile phone and find “WH202A” to connect.

EQ Mode

Charge the Headphones

Q: Couldn’t connect?
A: Please hold the “_” and “circle button” at the same time for 5 seconds, then search Bluetooth devices to connect the headphones.

Q: How to connect to 2 devices simultaneously?
A:

1. Pair with your first device
2. Turn off the Bluetooth of the first device, pair with the second device
3. Turn on the Bluetooth of the first device to connect again 4. Now your headset is connected to the 2 devices at the same time.

Q: What type of device is compatible?
A: This headsets are compatible with all devices that support Bluetooth or 3.5 mm plug cables. A wireless Transmitter (NOT Included) needs to be prepared when connected with a non-Wireless enabled TV/PC.

Warranty Information

30 days free return and 18 months warranty is our guarantee, please feel free to contact us at After-Sale-Service01@outlook.com for further inquires.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. NOTICE: Note: This equipment has been tested and found to comply with these limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISEDC RSS Warning:
This device complies with Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard (S). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter or the product comes itch the radio interference requirements This symbol means the product must not be discarded as  household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>