SIEMENS VersiCharge AC Series Commercial Instruction Manual
- June 11, 2024
- SIEMENS
Table of Contents
SIEMENS VersiCharge AC Series Commercial
Product Information
VersiCharge Configurator Installation Manual
The VersiCharge Configurator is a software tool used to commission chargers. It is compatible with Windows 10 operating system. The tool supports the following chargers:
- Not specified in the manual
The user manual for the VersiCharge Configurator can be accessed through the Help icon. The installation package can be downloaded from usa.siemens.com/versicharge and siemens.com/versicharge.
Product Usage Instructions
Install the VersiCharge Configurator
- Download the installation package from usa.siemens.com/versicharge or siemens.com/versicharge.
- Double-click on the installation file to begin the installation process.
- Follow the on-screen instructions to complete the installation.
- Once installed, launch the VersiCharge Configurator.
- The tool is now ready to be used for commissioning chargers.
Note: These instructions only apply to the version number listed on the title page of the manual.
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your
personal safety, as well as to prevent damage to property. The notices
referring to your personal safety are highlighted in the manual by a safety
alert symbol, notices referring only to property damage have no safety alert
symbol. These notices shown below are graded according to the degree of
danger.
DANGER
indicates that death or severe personal injury will result if proper
precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper
precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not
taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing
the highest degree of danger will be used. A notice warning of injury to
persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are
capable of identifying risks and avoiding potential hazards when working with
these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the
catalog and in the relevant technical documentation. If products and
components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly,
commissioning, operation and maintenance are required to ensure that the
products operate safely and without any problems. The permissible ambient
conditions must be complied with. The information in the relevant
documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The
remaining trademarks in this publication may be trademarks whose use by third
parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with
the hardware and software described. Since variance cannot be precluded
entirely, we cannot guarantee full consistency. However, the information in
this publication is reviewed regularly and any necessary corrections are
included in subsequent editions.
VersiCharge Configurator Installation
- Install VersiCharge Configurator on a Windows 10 operating system to commission chargers.
- The following chargers are supported by the VersiCharge Configurator:
- All VersiCharge UL models are supported except those with part numbers 8EM131X-XXX10-XXXX
- VersiCharge IEC models with part numbers 8EM131X-XXX0X-XXXX
- To view the Configurator user manual, click on the Help icon.
- The installation package can be found at usa.siemens.com/versicharge and siemens.com/versicharge.
Install the VersiCharge Configurator
Note
These instructions only apply to the version number listed on the title page.
VersiCharge Configurator installation steps:
-
Download and store the installation package in a local folder. The installation package is a zip file with the naming convention, VersiCharge_Configurator_Setup_v
.zip. -
Extract the zipped files into the folder of your choice.
-
Navigate to the extracted zip files and double-click Setup.exe.
The Installation Splash screen appears. -
Click Next to initiate the setup wizard.
If an older version of the Siemens VersiCharge Configurator is already
installed on your system, the setup wizard will prompt you to upgrade to the
newer version.
–To upgrade to the recent version, click Next.
Note
The Setup Wizard will remove the existing version of Siemens VersiCharge
Configurator and replace it with the recent version.
- To exit the setup wizard, click Cancel.
- Read the End User License Agreement. Select the checkbox to accept the terms of the agreement and click Next.
- Specify the destination folder to install.
- To continue with the default installation path, click Next.
- If you wish to change the default installation location, click Browse, select the preferred directory, and click Next.
Install the VersiCharge Configurator
- Click Install to begin the installation.
- Wait for the setup wizard to complete the installation.
- You can monitor the progress of the installation and details of the components installed in the left pane.
- To cancel the installation, click Cancel.
Note
If you cancel the installation process during the setup, the currently
installed version will be removed from your computer.
-
After successful installation, click Finish to complete the installation and exit the installation wizard.
-
Click on the log file in the installation wizard to review the installation log.
-
Click Siemens Industry > VersiCharge-Configurator in the Start Menu or double-click the VersiCharge-Configurator desktop shortcut to launch the application.
Repair or Remove Installation
To repair or remove the existing installation on your computer, perform the following steps.
-
Modify the installation using the setup wizard or control panel.
- Navigate to the extracted zip files and double-click Setup.exe.
- Click Control Panel > Programs > Programs and Features from the start menu. Select Siemens VersiCharge Configurator from the list and then click Uninstall/Change.
The setup determines the existing installation on your computer and the setup wizard appears.
-
Click Next to proceed.
-
Choose if you want to repair or remove.
-
To repair, select Repair and click Next.
The setup wizard will fix missing and corrupt files, shortcuts, and registry entries. -
To remove, select Remove and click Next.
The setup removes the existing installation from your computer.
-
-
Review and confirm before the setup starts.
- To repair the existing installation, click Repair.
- To remove the existing installation, click Remove.
- To review your choices and return to the previous step, click Back.
- To exit the wizard, click Cancel.
- To review your choices and return to the previous step, click Back.
- To exit the wizard, click Cancel.
-
Wait for the setup wizard to complete the action.
- After the setup repairs the installation, click Finish to exit the setup wizard.
- After the setup removes the installation components, click Finish to exit the setup wizard.
References
- VersiCharge - eMobility charging- Siemens global website - Siemens Global Website
- VersiCharge AC Series - Transportation Electrification - Siemens USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>