Seymour Duncan 11805-01 HyperSwitch Bluetooth 5 Way Switch User Guide
- June 11, 2024
- Seymour Duncan
Table of Contents
HYPERSWITCH™
Quick Start Guide
11805-01 HyperSwitch Bluetooth 5 Way Switch
Thank you for purchasing the HyperSwitch Bluetooth 5-way Switch. Here are a
few quick steps to get you connected to the HyperSwitch App and up and
running.
Make sure to visit seymourduncan.com for the most up to date product
information, installation guides, sample settings, firmware updates, FAQ’s,
warranty information, and additional safety/compliance information.
Important Safety Instructions
- This device requires a 9v battery to operate. For maximum safety, it is recommended that you only use 9v alkaline batteries. However, HyperSwitch will work with rechargeable and higher performance batteries like lithium manganese oxide batteries.
- Check installation of battery for correct polarity before use.
- Make sure the battery cannot short against any other wire connections or components inside the guitar cavity.
Getting Started
-
Download the HyperSwitch app for your mobile device.
• iPhone: Apple Applications Store
• Android: Google Play Store -
Make sure Bluetooth is enabled on your mobile device.
-
Launch the App and you will see a home screen to connect to the HyperSwitch.
-
Move the switch on the HyperSwitch to wake it up.
-
Press the CONNECT button on the App and quickly move the switch lever on HyperSwitch fully back and forth 4-5 times. This activates the Bluetooth on the HyperSwitch.
To preserve battery power the switch has a low signal radius. For best results you should try to stay within 2 to 4 feet of the guitar. -
Follow the instructions on the App to setup your HyperSwitch. We recommend watching the tutorial for a basic overview for setup and features.
Safety and Compliance Information
This product has been tested and complies with all the following standards and certifications.
EN 55032:2015+A11:2020
EN 55035:2017+A11:2020
** This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Contains FCC ID: 2AC7Z-ESP32WROOM32E**
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced technician for help.
Industry Canada
Contains IC ID: 21098-ESPWROOM32E
CAN ICES-003(B)/NMB-3(B)
Disposal Guidelines
In the unlikely event that you ever need to dispose of this product, it must
be disposed of properly by handing it over to a designated collection point
for the recycling of waste electronic equipment. Please contact your local
household waste disposal service or the shop where you purchased this product
for those locations.
Thanks for helping us conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment.
For technical support or product recommendations:
support@seymourduncan.com
Tech Support Hotline: 805-716-6747
Hours: M-F 8:00-5:00 PST
For support, tips and videos on installation, setup and more visit seymourduncan.com/hyperswitch-support
https://www.seymourduncan.com
/hyperswitch-support
5427 Hollister Ave, Santa Barbara, CA 93111
seymourduncan.com
References
- Seymour Duncan Guitar Pickups, Bass Pickups, Pedals
- Seymour Duncan HyperSwitch™ Support & Resources - Guitar Pickups, Bass Pickups, Pedals
- Seymour Duncan Guitar Pickups, Bass Pickups, Pedals
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>