BOROFONE RB28 Sports BT Speaker Instruction Manual
- June 11, 2024
- BOROFONE
Table of Contents
Sports BT Speaker
RB28
Instruction
Manual
Thank you for purchasing BOROFONE product. Hope you will have fun using RI Please read this user manual thoroughly before using, and keep it properly.
PRODCT OVERVIEW
HOW TO USE
- Press and hold the power key far 3 seconds to start the device, and the prompt tone will sound.
- Turn on BT on the phone, search for the BT device “Borofone BR28′ and connect the device manually for the first time.
- After the ‘Borofone BR2.51 is successfully connected, there will be a prompt tone.
Function | Operation method |
---|---|
Power on / off | Long press the power button for 3 seconds |
Play/ Pause | Press the power button |
Volume +/- | Long press ( ÷ ] / [ – ] |
Next/ Previous song | Press 1+] / 1-] |
Mode switch | Double-press [ M ] |
Turn on/offlect ng effect | Triple-click the [ M ] key to turn on/off, click to |
switch the lighting effect
Answer/ Hang up| Press the power button
Reject call| Long press the power button for 2 seconds
Redial| Double-press the power button
TWS pairing| When the two speakers are timed on and not connected, press and
hold one of the speakers E M 3 key for 2 seconds, you will hear the prompt
tone that the pairing is successful
SPECIFICATIONS
Product Features
Wireless specification: wireless V5.1
Product net weight: 191.8g
Protocols supported:
A2DP, AVRCP, HFP
Transmission range: 10m
Transmission frequency:2402-2480MHz
Frequency response: 20Hz-18kHz
Charging voltage: DC 5V
Charging time: about 2h
Talk time / Music time: 2h
Battery capacity: 600mAh
Size: 80x80x52.2mm
WARNING
- Do not expose the product to high temperatures, corrosive or high-pressure environment
- Do not attempt to disassemble the product, or to replace any electronic components in it.
- If the internal devices have fluid leakage, please stop use.
- Do not expose the battery (battery or combined battery) to excessive heat such as sunlight, fire or similar
FCC
NOTE: This equipment has been tested and found to comply with the limits
fora Class 8 digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio / TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>