Parrot LF9040 LM4 Laminating Machine 2 Roller A4 User Manual
- June 11, 2024
- Parrot
Table of Contents
Parrot LF9040 LM4 Laminating Machine 2 Roller A4
Product Information
The Laminating Machine 2 Roller A4 – LF9040 is a high-performance laminator
that features a slim and compact design.
It accepts pouches ranging from 80mic to 125mic in thickness, with size from
name card to A4 size. The laminator has a voltage of 220 -240V/50 Hz,
thickness of 0.6 mm, speed of 400 mm/min, and size of 370 x 80 x 45mm. It has
an entry width of 240mm, uses 80 and 125mic pouches, has 2 rollers, and weighs
0.6 Kg.
Product Usage Instructions
- Connect the plug to mains power and press the rocker switch to turn on the machine. The Power LED will turn red.
- To start thermal lamination, wait for about 1.5 minutes until the Green Ready LED turns on.
- Place the paper into a laminating pouch, and insert the pouch through the laminator entry. The sealed edge of the laminating pouch should always be inserted first.
- 4. For best seal, do not laminate anything that is more than 0.6mm thickness.
- To turn off the laminator, press switch button back to Off position.
- If a mis-feed occurs, first turn off the laminator, and then pull the pouch out by hand.
- To clean or move around, make sure that this laminator is turned off. Do not laminate dirty pouches, clean it before lamination. Do not use this laminator in damp conditions. Do not laminate heat sensitive paper.
- This laminator should only use power 220-240V/50Hz and be used indoors only.
- NEVER OPEN THIS LAMINATOR WHILE IN USE.
- This product comes with a 2-year limited warranty.
Read this manual carefully before use. Keep it safe for future reference.
Thank you for buying this high-performance laminator! This laminator features
a slim and compact design. It accepts pouches ranging from 80mic to 125mic in
thickness, with size from name card to A4 size.
Product Description
Specification
| Voltage: | 220 -240V/50 Hz | Current: | 1.2A |
|---|---|---|---|
| Ready time: | 1.5 minutes | Entry width: | 240mm |
| Thickness: | 0.6 mm | Pouch: | 80 and 125mic |
| Speed: | 400 mm/min | Rollers: | 2 |
| Size: | 370 x 80 x 45mm | N.W.: | 0.6 Kg |
Utility
It laminates both 80mic and 125mic thermal pouches from name card size to
A4 size. To get a better lamination performance, the suitable room temperature
is
18℃~25℃ (namely 65℉~77℉).
Operation
POWER ON and OFF
Connect the plug to mains power, press the rocker switch to turn on the
machine. The Power LED will turn red. If you press rocker switch to “Cold”
position,
the machine is under cold lamination status. If you press rocker switch onto
“Hot” position , the machine is under hot lamination status for thermal
pouches.
To turn off this laminator, press switch button back to “Off” position, power
will be cut off and laminator is shut off.
THERMAL LAMINATION
To laminate the document, you would have to wait for about 1.5 minutes until
the Green Ready LED turns on. Then place the paper into a laminating pouch,
and insert the pouch through the laminator entry. The sealed edge of the
laminating pouch should always be inserted first.
Note :
During the lamination process, the “READY LED” may go out, it will not
influence lamination.
Clear the Jammed Pouch
This laminator is designed with creative anti-jamming structure. Normally speaking, the pouch would not be jammed inside. In case a mis-feed occurs, first turn off the laminator, and then pull the pouch out by hand.
Maintenance and Warning
- To clean or move around, make sure that this laminator is turned off.
- Do not laminate dirty pouches, clean it before lamination.
- Do not use this laminator in damp conditions.
- Do not laminate anything that is more than 0.6mm thickness for best seal.
- Do not laminate heat sensitive paper.
- This laminator should only use power 220-240V/50Hz and be used indoors only. NEVER OPEN THIS LAMINATOR WHILE IN USE
Warranty
This product comes with 2 year limited warranty
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>