mentech WatchXe1 Bluetooth Sports SmartWatch User Manual

mentech WatchXe1 Bluetooth Sports SmartWatch

product introduction

Button Operations

Button
Press the button:

1. to ratum to the mein serpon
2. to him on the serpen in scracn-off state- or
3. to socass the goolication list from the man

Press and hold the button:

1. for 2s to tum on the watch n cower-oft state: or
2. fee ss to metar the sottwere vithout God mo data, or
3. for 10s to restart the hardware without clearing

Button

rose sho buttons:

1. to turn on the screen in screen-off state;
2. to co to the scoris list from the soo cation list .to stect an exercise in the soorts ist

Power On/Off

Turning on the watch: connect the watch to the magnetic chevron cock to start charo no as shown below in power-oft state, the watch can be tumed on automatically by charging.

Downloading the App and Pairing

Downloading the App:
Co to Accle Ago Store. Coogie Play or another Ago store, or seen the dr coda be cy to dounicad and install the ‘match wear App.

Pairing

Start the “mentech wear Acp -+ enable “Bluetooth” on your phone -+ search for your
watch in the Ago or scan the G code on the watch screen – follow the instructions
If vour watch is not found in the Bietooth device list. re-enable “Blustooth” on vour
phone and try to complete pairing again.

Touch Operations

Svripe up/down:

1. to switch to a gifterent menu item: or
2. to view a long text for details

Swipe left/right:

1. to switch to a ditterent menu item

Tao the screen :

1. to eccess a men meme
2. to follow on-screen instructions; or
3. to tum co the screen.

Touch and hold the screen

1. to change the watch feca

Specifications

Changing the Wristband

You can change the wristband in the following steps:

1. lie the sunnies scram river to loosen the two screws on the Hutton side
2. Remove the two screws
3. use the screwdriver to oush out the two screw rods. and then remove them
4.  Remove the existing wristband, and install a new wristband;
5. insert the two screw rods in clace from the side opposite to the button:
6. Use the screwdriver to install two screws from the button side

Product Features

ManTech watch X1″ Is an sports watch designed for outdoor enthusiasts. featuring 5ATM rating, outstanding battery endurance, full-screen touch control. high-precision GPS, sensitive barometric altimeter, compass, up to 110 sports and a variety of cloud watch faces.supporting 24-hour HR, Sp02 and sleep monitonna. or operatino instructions and frecuently asked questions, please ac to fUser Guidel in the Apo.

Maintenance and Servicing

Recommendations for use and maintenance:

1. Keeo the product clean:
2. Keep the product dry.
3. Do not wear the product too tightly.
4. Do not use household detergents to clean the product. Please use a soap-free clossor ingrosa
5. It is recommended to remove stubborn stains by scrubbing with alcohol. waterercomess. tis product is not tenoed for use on ovine, sea swimming of sauna occasions, but for use in swimming pools and shallows.

Safety Instructions

• Do not place the product or its accessores at extreme temperatures. as this could cause product failure, he or explosion
• Protect the product against strong impact or vibration that could cause damage.
• Do not disassemble or modify the wroduct or is accessoros in case of croduct failure

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FOC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment oonerates uses and can radiate radic frequency onerov and it not installed nod used in accordanco with thy instructions, may cause harmful interference to radio communications. However, there is no guarantee that interterence will not occur in a particular installation. it this equipment does cause harmiu interterence to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence ay one or more of the following measures:

• Reorient or relocate the receivino antenna.

• Increase the separation between the ecuioment and receiver. –

• Connect the equipment into an outlet on a circuit different from that to which

• Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for comollanco could void the user’s authority to operate the sauioment.

• This davce comolies with part 15 of the FOO Rules Operation is sublect to the following two conditions this device may not cause harm interference, and this device must acceot any interterence received. including interterence that may cause undesired operation

• Responsible Party:

• Company name: Americas Compliance Consulting, LLC ba Certifi

• Address: 1001 SW Disk Drive, ste 250, Office 3, Bend, OR 97702, United Stater

• Tel: 866-885-4575

• E-mail: Paul@icertifi.com+

• CET PRODUCT SERVICE SP. Z 0.0. (for authorities only/UL.

• Dugs as 102 zgierz Fostal Code: 95-100 Poler

• CET PRODUCT SERVICE LTD. (for authorities only)

• BAgoon HoUse Stokenchurch Business Parlbstone RO.

• Woombe Hole

• 3FE UK

• FCC ID : 2A95D-MP01

• Manufacturer: Mentech Technical Innovation Co., Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>