HUAWEI AND-B19 WATCH GT Cyber Device Body Installation Guide
- June 11, 2024
- Huawei
Table of Contents
HUAWEI AND-B19 WATCH GT Cyber Device Body
Product Information
The Device Body Installation Guide provides instructions for installing and replacing the frame and crown of the device body. The package includes the frame, device body, and a crown removal tool. It is important to note that the strap and screws of the frame cannot be removed as damage caused by removal is not covered by the warranty.
Components
Device Body Installation Guide
- Remove the protective films and install the device body.
Frame Replacement Guide
-
Remove the device body
-
Remove the crown
Note: You can determine whether to replace the crown as required .
-
Install a new crown
Align the crown with the device body, and press firmly to install it in place. Gently pull the crown to check whether it is properly installed.
-
Install the device body
Install the device body into the frame.
Note: This figure is for reference only. The actual product shall prevail.
Please note that a video tutorial on how to install and remove the frame and
crown is available by scanning the QR code provided in the package.
It is important to ensure that the device body is properly installed and that
any replacement of parts is done with caution to avoid damage to the device.
Note: The figure provided in the manual is for reference only, and the
actual product may vary.
Please scan the QR code to watch a video tutorial on how to install and remove
the frame and crown. A tool for crown removal is included in the product
package.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>