Kaufland 4-KL6253-1-2 Wall Clock with Temperature and Humidity Instructions
- June 11, 2024
- Kaufland
Table of Contents
- 4-KL6253-1-2 Wall Clock with Temperature and Humidity
- Product Information
- Technical Specifications
- Product Usage Instructions
- Wall Clock with Temperature & Humidity
- Technical specifications
- Important safety information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
4-KL6253-1-2 Wall Clock with Temperature and Humidity
Product Information
The Wanduhr mit Thermo- und Hygrometer is a wall clock with temperature and humidity features. It comes with a 1.5V AA LR6 alkaline battery and operating instructions. The device is not intended for commercial use.
Technical Specifications
- Art.-Nr.: 4-KL6253-1-2
- IAN 423669_2204
- DC voltage indicator
- Battery: 1 x 1.5 V AA R6/LR6
- Herstellungsjahr: 2022
Safety Instructions
The device comes with safety instructions that should be read before use.
Improper use or incorrect operation of the device can cause damage, and the
manufacturer is not liable for such damage.
Product Usage Instructions
Package Contents Check
After purchasing the device, please check the package contents to ensure that all parts are present and not defective. If the delivery is incomplete and/or parts are damaged, do not use the device. Contact the service department (see What to do to use the warranty).
Battery Installation
- Do not mix new and used batteries.
- Do not charge batteries.
- Always insert batteries with correct polarity.
- The device comes with an alkaline battery included.
Time Setting
To set the time, please refer to the operating instructions provided.
Thermometer Usage
The device comes with a thermometer feature. Please refer to the operating
instructions provided for usage information.
Hygrometer Usage
The device comes with a hygrometer feature. Please refer to the operating
instructions provided for usage information.
Cleaning and Storage
- Do not use abrasive cleaners to clean the device.
- Store the device in a dry and cool place when not in use.
Disposal
Dispose of packaging materials properly and separately if necessary. Refer
to local regulations for proper disposal of batteries.
Wall Clock with Temperature & Humidity
Introduction
Congratulations on purchasing your wall clock with thermometer and hygrometer
(hereinafter referred to as “device”). You have chosen a high-quality device.
The short manual is part of this device. It contains important information
pertaining to safety, and to using and disposing of the device. Please
familiarise yourself with all the operating and safety instructions before
using this device. Use the device only as described and for the purposes
indicated.
All documents must be provided when giving the device to third parties. Please
keep the packaging and the short manual for future queries.
In doing so, you have opted for a high-quality device. These operating
instructions form an integral part of this device. It contains important
instructions pertaining to its safety, use and disposal. Please familiarise
yourself with all the operating and safety instructions before using this
device. Use the device only as described for the indicated purposes. If you
pass this device on to anyone else, please be sure to pass on these documents
with it. Please keep the packaging and operating instructions for future
reference.
Intended use
The device is suitable for displaying the time and for using the additional
functions described. Any other use or modification of the device is considered
to be improper use. The manufacturer is not liable for damage caused by
improper use or incorrect operation. The device is not intended for commercial
use.
Package contents
Note: Please check the package after purchase. Check that all parts are
present and not defective. If the delivery is incomplete and/or parts are
damaged, do not use the device. Contact the service department (see “What to
do to use the warranty”).
- ···· 1x wall clock
- ···· 1x battery (1.5 V AA LR6)
- ···· 1 x operating instructions
Technical specifications
- Quartz movement ES368
- Measuring range/temperature: -20 – 50 °C
- Temperature display/tolerance: +/- 3 °C
- Measuring range/humidity: 10% – 100%
- Humidity indicator/tolerance: +/- 8%
- Dimensions: approx. Ø 25.4 x 4.0 cm
- Weight: approx. 348 g (excl. batteries)
- Battery: 1 x 1.5 V AA R6/LR6
- DC voltage indicator
Explanation of symbols
| WARNING!| This warning signal/word indicates a hazard with a medium level of risk which, if not avoided, could result in
death or serious injury.
---|---|---
| Note:| This signal word indicates additional information.
| | Improper use of disposable batteries/rechargeable batteries may result in
a risk of explosion and of the battery fluid leaking.
|
| Alkaline battery included
| | Battery: 1 x 1.5 V AA R6/LR6
| | Symbol for DC voltage
| | Operating instructions
| | Please read the operating instructions!
CE
| | digi-tech gmbh demonstrates
conformity with the applicable EU
directives by means of the CE marking.
| | Setting the time
| | Caution, fragile!
Explanation of the battery symbols
Always keep batteries out of children’s reach.
Do not throw batteries into fire or put them in contact with fire.
Always insert batteries with the correct polarity.
Do not deform or damage batteries.
Do not open or disassemble batteries.
Do not mix batteries of different brands or types.
Do not mix new and used batteries.
Do not charge batteries.
Protect batteries from moisture and keep them away from liquids.
Do not short-circuit batteries.
Always insert the batteries in the correct polarity.
Important safety information
Safety information for users
WARNING! RISK OF INJURY!
This device can be used by persons (including children aged 8 and over) with reduced physical, sensory and mental abilities, as well as by persons with a lack of experience and knowledge if they are supervised or have been given instructions concerning the safe use of the device and understand the dangers associated with it. Children must not play with the device. Cleaning and user maintenance must not be carried out by children unless they are supervised. Also keep the packaging film out of reach of children. There is a danger of suffocation!
Battery safety information
WARNING! HEALTH HAZARD! RISK OF EXPLOSION!
Keep old and new disposable batteries/rechargeable batteries out of reach of
small children. If a disposable battery/ rechargeable battery is swallowed,
seek medical attention immediately.
The disposable batteries/rechargeable batteries must always be inserted with
the correct polarity. Clean the battery and device contacts beforehand if
necessary. Do not attempt to recharge, short-circuit, or open the batteries.
Never heat the disposable/rechargeable batteries to recharge them. Do not
expose the disposable/rechargeable batteries to excessive heat such as
sunshine, fire or the like. There is an increased risk of leakage! Never throw
disposable batteries/rechargeable batteries onto the fire, as they may
explode.
There is a risk of explosion and leakage of battery fluid if the disposable
batteries/rechargeable batteries are used incorrectly. If the disposable
batteries/rechargeable batteries do leak, avoid contact with skin, eyes and
mucous membranes. Use protective gloves. In the event of contact with battery
fluid, rinse the affected areas immediately with plenty of clean water and
seek medical attention straight away. Remove the dead disposable
battery/rechargeable battery from the device immediately as there is an
increased risk of leakage.
Note:
- Non-rechargeable batteries must not be charged!
- Do not short-circuit the connecting terminals or the device terminals.
- Empty disposable batteries/rechargeable batteries must be removed from the device and safely disposed of (see Disposal of batteries)!
- If the device is stored unused for a prolonged period of time, the disposable batteries/rechargeable batteries should be removed.
Hanging the device securely
The device is not designed to be used in rooms with a high humidity level
(e.g., bathrooms). Before mounting to the wall, make sure that there are no
gas, water or electricity lines at the drilling location. Use suitable screws
and dowels (not included in scope of delivery). Be mindful of the wall’s
condition.
The manufacturer assumes no liability for damage caused by improper fastening.
Make sure that
- no direct heat sources (e.g., heaters) affect the device;
- it is not placed in the path of direct sunlight;
- contact with splashing or dripping water is avoided;
- the appliance does not hang or stand in the immediate vicinity of magnetic fields (e.g., loudspeakers);
- to avoid having foreign objects interfere with it;
- candles and other open flames are kept away from the device at all times, to prevent the spread of fire.
Starting up the device
Using the correct polarity, insert a 1.5 V AA R6/LR6 battery into the battery
compartment on the back of the device.
Setting the time
Use the dial on the back of the device to set the time.
Thermometer
Your device has an analogue display for the TEMPERATURE.
The measuring range of the temperature is between -20 – 50 °C.
Note: After unpacking your device, it may take some time for the sensor
to adapt to the new environment.
Hygrometer
Your device has an analogue HUMIDITY indicator.
The humidity measuring range is between 10 – 100%
Note: After unpacking your device, it may take some time for the sensor
to adapt to the new environment.
Cleaning instructions
Improper cleaning can damage the device. Do not immerse the device in water or
other liquids. Avoid any aggressive cleaning agents, brushes with metal or
nylon bristles, or any sharp or metallic cleaning objects such as knives, hard
spatulas and the like. These can damage the surface. Clean the device with a
soft, dry, lint-free cloth, such as is used for cleaning eyeglass lenses.
Storage
If the device will not be used for a prolonged period of time, remove the
batteries and store the device, cleaned and protected from sunlight, in a
cool, dry place, ideally in its original packaging.
Simplified EU declaration of conformity
The digi-tech gmbh hereby declares that the wall clock with thermometer and
hygrometer 4-KL6253-1-2 complies with the guidelines RoHS 2011/65/EU,
2014/30/EU.
You can download your operating instructions and declaration of conformity
here: www.digi-tech-gmbh.com/downloads
Then click on the magnifying glass and enter item number 423669_2204.
Disposal
The product and packaging materials are recyclable; dispose of them separately
for better waste treatment. For options for disposing of the used product,
please contact your municipal or city administration.
Pay attention to the labelling on the packaging materials when separating waste; these are marked with abbreviations (a) and numbers (b) that mean the following:
- 1–7: plastics
- 20–22: paper and cardboard
- 80–98: composites.
Disposing of the electrical device
The symbol with the crossed-out waste bin signifies that electrical and
electronic equipment must not be disposed of with household waste. Consumers
are legally obliged to
collect electrical and electronic equipment separately from unsorted municipal
waste at the end of their service life. In this way, an environmentally
friendly and resource-saving usage is ensured. Batteries and rechargeable
batteries that are not firmly enclosed by the electrical or electronic device
and that can be removed non-destructively must be separated from the device
before it is handed over to a collection point and disposed of as intended.
The same applies to light sources that can be removed from the device non-
destructively.
Owners of electrical and electronic equipment from private households can hand
them in at the collection points of the public waste disposal authorities or
at the collection points set up by the manufacturers or distributors within
the jurisdiction of the ElektroG/WEEE. The surrender of old devices is free of
charge. Please dispose of the device by returning it to your KAUFLAND store.
Dealers with a sales area of at least 400 m2 for electrical and electronic
equipment are obliged to take them back. The same applies to food retailers
with a total sales area of at least 800 m2, provided that they offer
electrical and electronic equipment continuously or at least several times a
year. Distance sellers with a storage area of at least 400 m2 for electrical
and electronic equipment or a total storage area of at least 800 m2 are also
obligated. In general, distributors are obliged to ensure that old devices can
be returned free of charge by means of suitable return options at a reasonable
distance.
Consumers have the option of handing over an old device free of charge to a
distributor who is obliged to take them back if they purchase an equivalent
new device with essentially the same function. This possibility also exists
for deliveries to a private household. In distance selling, the option of free
pick-up when purchasing a new device is limited to heat exchangers, display
screen devices and large devices that have at least one outer edge with a
length of more than 50 cm. When concluding the purchase contract, the
distributor must question the consumer about their return intention. Apart
from that, consumers can hand in up to three old devices of one type at a
collection point of a distributor free of charge, without this being tied to
the purchase of a new device. However, the edge lengths of the respective
devices must not exceed 25 cm.
Consumers are encouraged to take measures to avoid waste. With regard to
electrical and electronic devices, this means extending their lifespan by
repairing defective devices and selling used devices that are in good working
order instead of disposing of them.
Remove the battery before disposal without causing damage and dispose of it
separately (see “Disposing of the batteries”).
Battery disposal
The accompanying symbol indicates that batteries and rechargeable batteries
must not be disposed of with normal household waste. Defective or used
batteries/rechargeable batteries must be recycled in accordance with Directive
2006/66/EC and its amendments. Consumers are legally obliged to dispose of all
batteries and rechargeable batteries, regardless of whether they contain
harmful substances such as: Cd = cadmium, Hg = mercury, Pb = lead, Li =
lithium or not, at a collection point in their municipality/district or at a
retail outlet, for environmentally friendly disposal and for the recovery of
valuable raw materials such as cobalt, nickel or copper.
The return of batteries and accumulators is free of charge.
WARNING!
Environmental damage through incorrect disposal of batteries/ rechargeable
batteries!
Some of the possible materials such as mercury, cadmium and lead are poisonous
and, if not disposed of properly, endanger the environment. For example, heavy
metals can have harmful effects on the health of humans, animals and plants
and accumulate in the environment and in the food chain, and can then enter
the body indirectly via food.
WARNING! Danger of explosion!
With used batteries containing lithium (Li = lithium) there is a high risk of
fire. Therefore, special attention must be paid to the proper disposal of used
batteries and rechargeable batteries containing lithium. Incorrect disposal
can also lead to internal and external short circuits due to thermal effects
(heat) or mechanical damage. A short circuit can lead to a fire or an
explosion and have serious consequences for humans and the environment. For
this reason, tape off the poles of lithium-based batteries and rechargeable
batteries prior to disposal in order to avoid an external short circuit.
Batteries and rechargeable batteries that are not permanently installed in the
device must be removed and disposed of separately before disposal of the
device. Please return batteries and rechargeable batteries only when they have
been discharged!
Use rechargeable batteries instead of disposable batteries whenever possible.
Recycling
The product packaging consists of recyclable materials. Please dispose of them
properly at the available collection sites.
Waste disposal
Dispose of the packaging in an environmentally responsible fashion.
Please note the marking of the different packaging materials and separate them
if applicable.
The digi-tech gmbh warranty
This device has a 3-year warranty valid from the date of purchase. In the
event of defects in this device, you have legal rights against the seller of
the device. These statutory rights are not limited by our warranty set out
below.
Warranty terms
The warranty period begins on the date of purchase. Please keep the receipt.
This document is required as proof of purchase. If a material or manufacturing
defect occurs within three years of the date of purchase of this device, the
device will be repaired or replaced – at our discretion – by us free of
charge. This warranty requires that the defective device and the purchase
receipt are presented within the three-year period with a briefly written
statement stating the nature of the defect and when it occurred. If the defect
is covered by our warranty, you will receive the repaired or a new device
back. No new warranty period begins with the repair or replacement of the
device.
Warranty period and statutory claims for defects
Statutory warranty rights do not extend the warranty period. This also applies
to replaced and repaired parts. Any damage or defects already present at the
time of purchase must be reported immediately after unpacking. After the
warranty has expired, any repairs are subject to a charge.
Scope of Warranty
The device was carefully manufactured according to strict quality guidelines
and carefully checked before delivery. The warranty applies to material or
manufacturing defects. This warranty does not cover parts of the product that
are subject to normal wear and tear and can therefore be regarded as wear
parts or for damage to fragile parts, e.g. switches, batteries or parts made
of glass. This warranty is void if the unit has been damaged or improperly
used or maintained. For proper use of the device, all instructions given in
the manual must be strictly observed. Uses and actions that are advised
against or warned against in the operating instructions must be avoided at all
costs. The device is designed exclusively for private and not for commercial
use. The warranty expires in the event of abusive or improper handling, the
use of force or repairs that were not carried out by our authorised service
branch.
Processing in the event of a warranty claim
To ensure that your request is processed quickly, please follow the
instructions below:
- For all inquiries, please have the receipt and item number (423669_2204) ready as proof of purchase.
- Please refer to the type plate, engraving, title page of your manual (bottom left) or to the sticker on the back or underside for the item number.
- If functional errors or other defects occur, first contact the following service department by phone or email.
You can download these instructions and many other manuals, product videos and software at www.kaufland.com/manual.
This QR code will take you directly to the Kaufland service page
(www.kaufland.com/manual) where you will be
able to access your operating instructions by entering item number
(423669_2204).
Service
Inter-Quartz GmbH
Valterweg 27A
65817 Eppstein
GERMANY
Email: support@inter-quartz.de
Telephone: +49 (0)6198 571825 00800 5515 6616 00800 44 11 493
800 142 315 0800 896640
0800 896640 0800 004449
0800 222943 00800 1114916
IAN 423669_2204
Art.-Nr.: 4-KL6253-1-2
Supplier
Please note that the following address is not a service address. Please first contact the service address (see above).
digi-tech gmbh
Valterweg 27A
65817 Eppstein
GERMANY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>