KUFATEC Audi Q3 F3 Adapter LED Headlights Instruction Manual
- June 11, 2024
- KUFATEC
Table of Contents
Audi Q3 F3 Adapter LED Headlights
Product Information: Adapter LED Headlights (v1.1)
The Adapter LED Headlights is a product designed and
manufactured by Kufatec GmbH & Co. KG to enable the
installation of LED headlights in a vehicle. The product comes with
a connection cable set, which is used to connect the LED headlights
to the vehicle’s electrical system. The product also includes a
coding interface, which is used to program the vehicle’s control
unit to recognize the new LED headlights.
Requirements for the intended use:
- The vehicle must have halogen headlights installed.
- The vehicle must be compatible with LED headlights.
- The user must have basic knowledge of vehicle electrical
systems.
Safety Instructions:
Before installing the Adapter LED Headlights, please read and
follow the safety instructions provided in the user manual. Failure
to do so may result in injury or damage to the vehicle.
Product Usage Instructions:
-
Disassembly: Before installing the Adapter LED
Headlights, the front bumper, headlights, dashboard cover, A-column
covering, and sill trim on the driver’s side must be disassembled.
Refer to sections 10-13 of the user manual for detailed
instructions. -
Assembly: Follow the cable routing diagram in
Figure 3 of the user manual to lay the cable set in the most
convenient and shortest way possible. For detailed cable routing
instructions, refer to the relevant sections of the user
manual. -
Connection: Connect the cable set to the LED
headlights and the vehicle’s electrical system following the
instructions in section 6 of the user manual. Be sure to follow the
cable inscription/color codes provided in section 7 of the user
manual. -
Coding: Use the coding interface provided with
the Adapter LED Headlights to program the vehicle’s control unit to
recognize the new LED headlights. Refer to sections 15-16 of the
user manual for detailed coding instructions. -
Final Work: Reassemble the front bumper,
headlights, dashboard cover, A-column covering, and sill trim on
the driver’s side following the instructions in section 17 of the
user manual. -
Testing: Test the LED headlights to ensure
they are functioning properly.
Please note that professional installation is recommended for
this product. For any further questions or troubleshooting, refer
to section 21 of the user manual or contact Kufatec GmbH & Co.
KG at info@kufatec.de.
Installation Instructions
Adapter LED Headlights
v1.1 (01.02.2023)
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
1
Contents
1 Liability Exclusion
3
2 Copyright
4
3 General notes
4
4 Safety Instructions
5
5 Requirements for the intended use
5
6 How to connect a cable to another
6
7 Note Cable Inscription/Color
7
8 Assembly Instructions
8
9 Assembly Note
9
10 Disassembly front bumper
10
11 Disassembly headlights
12
12 Disassembly dashboard cover driver’s side
13
13 Disassembly A-column covering / sill trim driver’s side
14
14 Connection cable set
15
15 Coding with Coding Interface
16
16 Coding Interface
16
17 Final work
17
18 Assembling the vehicle
17
19 Bus rest
17
20 Additional vehicle function
17
21 Connection/Troubleshooting cable set
18
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
2
8 Assembly Instructions
The following illustration shows the cable routing as well as the position of
the individual components.
1
2,3
1
1
2,3
Figure 3: Vehicle overview
· 1 Headlights · 2 Body control module · 3 Fuse box
Please be aware that this overview is only for illustration purposes. Always
lay the cable set in the most convenient and shortest way possible. For a
detailed description of the cable routing, please refer to the relevant
sections of the following manual.
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>