PREMIUM LEVELLA PEM351 Steam Espresso and Cappuccino Maker User Manual

PREMIUM LEVELLA PEM351 Steam Espresso and Cappuccino Maker

IMPORTANT SAFEGUARDS

Before using any electrical appliance, the following basic precautions should always be followed:

1. Read all instructions.
2. Before using, check that the voltage of the wall outlet corresponds to the rated voltage marked on the rating plate.
3. This appliance has been provided with a grounded plug. Please ensure the wall outlet in your house is well grounded.
4. To protect against fire, electric shock and injury to persons, do not immerse cord, plug, or machine in water or any other liquid.
5. Remove the plug from the wall outlet before cleaning and when not in use. Allow the appliance to cool down completely before taking off parts, attaching components or before cleaning.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
8. Place the appliance on a flat surface or table. Do not allow the power cord to hang over the edge of the table or counter.
9. Ensure the power cord does not touch hot surfaces of appliances.
10. Never use the coffee maker in an environment of high temperatures, high magnetic fields and humidity. Do not place the coffee maker on hot surfaces or besides fire or another electrical appliance, such as on the top of refrigerator to avoid damages to the appliance. Never place any other object on the top of the coffee maker.
11. To disconnect, remove the plug from the wall outlet. Always hold and pull the plug; never pull the cord.
12. Do not use the appliance for other than its intended use and place it in a dry environment.
13. Close supervision is necessary when your appliance is operating. Do not let the appliance on the standby state for a long time. Never allow children or infirm persons to operate the appliance.
14. Be careful not to get burned by the steam.
15. Some parts are hot when the appliance is operating and after it finishes working (stainless steel plate, drip tray shelf, top cover, steam tube and froth nozzle), so do not touch the machine with your hands directly. Use handles or knobs.
16. Clean the coffee maker regularly according to the “Cleaning and Maintenance” section to ensure the quality of your coffee and extend the life of appliance.
17. If you will not use the appliance for a long time, clean all the detachable components, and dry them for storage.
18. Never shut off the power while the coffee maker is making coffee, making hot water or making steam. Refer to the instruction manual.
19. Never operate the appliance when it malfunctions in any way. Do not place any foreign object into the brewer.
20. Never use detergent or hot water for cleaning the brewing component, to avoid damage due to lack of lubrication or high temperature.
21. Do not let the coffee maker operate without water.
22. Do not use outdoors.
23. Save these instructions.
24. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or without experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
25. Children should be supervised to ensure that they do not play with the appliance.
26. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
27. Do not immerse the appliance (including power cord and plug) into any liquid.
28. The filling opening must not be opened during use.

KNOW YOUR PRODUCT

1. Boiler cover
2. Steel mesh
3. Top cover
4. Steam knob
5. Indicator
6. Metal funnel
7. Press bar
8. Funnel Handle
9. Steam conduit
10. Carafe cover
11. Frothing device
12. Carafe handle
13. Carafe
14. Main body
15. Removable shelf
16. Drip tray
17. Measuring spoon
18. Coffee Setting
19. Pause Setting
20. OFF
21. Steam Setting
22. Insert
23. Lock

OPERATIONS MANUAL

BEFORE THE FIRST USE

1. Remove the coffee maker from the package and check the accessories according to the list.
2. Clean all the detachable components according to section “CLEANING AND MAINTENANCE” and assemble them completely.
3. Ensure the steel mesh and funnel place are in position. Place the carafe on the removable pad.
4. Use the appliance according to sections “B” and “C” (with NO coffee powder into the steel mesh). Repeat the same process 2-3 times to clean the coffee maker.

HOW TO MAKE ESPRESSO COFFEE

1. Remove the tank cover by turning it in anti-clockwise. Pour water in the water tank with the carafe. Do not exceed the maximum capacity.
   Note: The carafe has cup marks. The maximum tank capacity is 4 cups of water. The minimum tank capacity is 2 cups of water.

2. Before pouring the water into the water tank, be sure the power cord is unplugged from the power outlet and the steam knob is in the OFF position.

3. Replace the tank cover in place by turning the cover in clockwise until it locks in position.

4. Put the steel mesh into the metal funnel, add coffee powder to the steel mesh with the measuring spoon. A spoon of coffee powder can make about a cup of top-grade coffee. Then press the coffee powder tightly with the tamper at the back of the measuring spoon.
   Note : Select the desired quantity of coffee powder to make the desired number of cups of coffee. The steel mesh has 2 cups and 4 cups marks.

5. Make sure the stripes on the funnel align with the grooves in the appliance, then insert the funnel beginning at the “Insert” position, and fix the funnel into the coffee maker turning it anti-clockwise until it is locked in the “Lock” position (see Fig. 1 ).

6. Place the empty carafe with its cover on the removable shelf.

7. Plug the power cord into the outlet. Turn the steam knob to position, and the indicator is illuminated. Wait for about 2 minutes and coffee will begin coming out.

8. After the desired amount of coffee has been obtained, turn the steam knob to the OFF position,
   the indicator will go out and the coffee maker will stop working. Your coffee is ready now. WARNING: Do not leave the coffee maker unattended during this process, as you may need to operate it manually sometimes!

9. Before removing the steel mesh or opening the tank cover, make sure the pressure in the tank is released. For this, turn the steam knob to the OFF position and the steam in the tank will be released from the frothing device. After pressure has been released, wait for the steel mesh to cool down, and then you can remove the steel mesh or open the tank cover.

10. After finishing preparing the coffee, you can take the metal funnel out turning it counterclockwise and pour the coffee residue out with the steel mesh pressed by the press bar. Let them cool down completely and then rinse them under running water. (When assembling the steel mesh again, you must turn over the press bar to the original position)

FROTHING MILK TO MAKE CAPPUCCINO
You get a cup of cappuccino when you top up a cup of espresso with frothing milk.
Method:

1. Prepare espresso according to part “B. HOW TO MAKE ESPRESSO COFFEE” and pour it into a cup big enough to hold the coffee and frothed milk.

2. Fill a jar with the desired amount of milk for each cappuccino to be prepared. Whole milk at refrigerator temperature (not hot!) is recommended.
   Note: When choosing the size of the jar to use for milk frothing, it is recommended that its diameter is not less than 70±5mm. Also, bear in mind that the milk increases in volume, so make sure the height of the jar is enough to hold the milk once frothed.

3. Turn the steam knob to the  position, and the indicator will light up.

4. Insert the frothing device into the milk about two centimeters. After about 2 minutes, steam will come out from the frothing device. Froth milk moving the vessel around and up and down until the desired level of foam is made. Frothing milk is a learned skill. You may need to practice your technique to achieve the required foam consistency.

5. When the required amount of foam is reached, turn the steam control knob to the OFF position to stop frothing. Release the resto of the steam in the tank.
   Note: Clean the steam outlet with a wet sponge immediately after steam stops generating. Be careful not to get burned with the steam!

6. Pour the frothed milk into the espresso prepared and the cappuccino is ready. Sweeten to taste and if desired, sprinkle the froth with a little cocoa powder.
   Note: We recommend that you allow the appliance to cool down a little before making coffee again. Otherwise, a burnt odor may result in your espresso coffee.

CLEANING AND MAINTENANCE

1. Cut off the power source and let the coffee maker cool down completely before cleaning.

2. Clean the housing of coffee maker often with a soft wet sponge.
   Note: Do not clean with alcohols or solvent cleansers. Never immerse the housing in water for cleaning.

3. Detach the metal funnel turning it clockwise, get rid of all ground coffee residue inside, and then clean it with soapy water and with clear water.

4. Clean all the detachable attachments in water and dry thoroughly before storing.

CLEANING MINERAL DEPOSITS

1. To make sure your coffee maker is operating efficiently, internal piping is clean, and you get the best flavor of your ground coffee, you must clean away the mineral deposits left inside the machine every 2-3 months.
2. Fill the tank with water and descaler to the MAX level (the ratio of water to descaler is usually 4: 1, but always refer to the descaler instructions). Please use “household descaler” or you can use citric acid (obtainable from drug stores) instead of descaler (one hundred parts of water to three parts of citric acid).
3. According to the instructions to make espresso coffee, put the metal funnel (with no coffee powder in it) and jar in place. Brew water as instructed in “B. HOW TO MAKE ESPRESSO COFFEE”.
4. Turn the steam knob to the 0 position (the indicator will be illuminated) and make two cups of coffee (about 20 Oz). Then turn the steam knob to the OFF position and wait for 5 seconds.
5. Turn the steam knob to the .;;;, position and make steam for 2 minutes, then turn the steam knob to the OFF position to stop the unit immediately, and make the descaler deposit inside the unit. Wait for at least 15 minutes.
6. Restart the unit and repeat steps 4-5 at least 3 times .
7. Turn the steam knob to the position to brew until no descaler is left.
8. Then, brew coffee (with no coffee powder) with tap water up to the MAX level, repeat steps 4-5 at least 3 times (it is not necessary to wait for 15 minutes on step 5), then brewing until no water is left in the tank.
9. Repeat step 8 at least 3 times to make sure the piping is clean.

TROUBLE SHOOTING

Carafe leaks water or water leaks out from lid of carafe

| The carafe is  not Id properly Pace| Place the center line of the carafe aligning with the opening of the brew basket.
The level of water in the tank exceeds the MAX level.| The water level in the tank should be within MIN and MAX levels.

The metal parts in the tank have rust.

| The descaler is not the recommended type. It may corrode the metal parts in the tank.| Use the descaler recommended by manufacturer.
Water leaks from the bottom of coffee maker.| There is too much water in the drip tray.| Please clean the driptr ay.
The coffee maker is malfunctioning.| Please contact with the authorized service facility for repairing.
Water leaks out of outer side of filter.| There is some coffee powder on the filter edge.| Clean the edge.
Acid     (vinegar)      taste     in espresso coffee.| The machine has not been cleaned completely after cleaning the mineral deposits.| Clean the coffee maker as instructed on “before the first use” section several times.
The coffee powder is stored in a hot, wet place for a long time. The coffee powder is spoiled.| Please use fresh coffee powder, or store unused coffee powder in a cool, dry place. After opening a package of coffee powder, reseal it tightly and store it in a refrigerator to maintain its freshness.
The coffee maker cannot work anymore.| The power outlet is not plugged well.| Plug the power cord into a wall outlet correctly. If the appliance still does not work, please contact with the authorized service facility for repairing.
The steam does not froth.| The steam ready indicator (green indicator) is not illuminated.| Only after the steam ready indicator (green indicator) is illuminated, the steam can be used to froth.
The container is too big, or the shape is not appropriate.| Use a high and narrow cup.
You have used skimmed milk| Use whole milk or half-skimmed milk

Do not take apart the appliance by yourself. Contact certified serving center.

ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in non-working electrical equipment to an appropriate waste disposal centre.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>