CliqueFie Max Selfie Stick Wireless Snapshot User Manual

CliqueFie Max Selfie Stick Wireless Snapshot

Product Information

Wireless Snapshot

• The Wireless Snapshot is a remote control device that allows users to capture photos and videos from a distance via Bluetooth connectivity. It is compatible with iOS 7.0 or later and Android version 6.0 or later.
• The device does not require an extra app to function and can be connected to a smartphone via Bluetooth 4.2 with a range of up to 10 meters. It has a button, LED light, hole, and battery cover.
• The Wireless Snapshot comes with a user manual that provides detailed instructions on how to pair the device with a mobile phone and use it to capture photos and videos.

Product Usage Instructions

Wireless Snapshot

1. Turn on Bluetooth on your mobile phone by going to Settings > Bluetooth.
2. Hold the CliqueFie remote button for about 3 seconds until the LED light blinks. This indicates that the device is in Discoverable mode.
3. When your smartphone detects the CliqueFie, tap it to connect the device.
4. A message will pop up on your phone asking you to tap “Pair” to allow CliqueFie to connect with your device. Once connected, the CliqueFie will show as “Connected” under My Devices.
5. Turn on your camera and use the CliqueFie Wireless Snapshot to capture photos or videos from a distance.
6. When you are finished, turn off Bluetooth on your mobile phone or remove the battery if you are not planning to use it for an extended period.
7. Ensure that your Volume key is set to Shutter mode and avoid using more than two CliqueFie devices simultaneously.
8. If you encounter difficulties in pairing or using the CliqueFie Wireless Snapshot, please contact CliqueFie Customer Support.

INSTALLATION INSTRUCTION

• App-Free: No extra App is needed. Connect via Bluetooth 4.2
• Bluetooth range: up to 10 M.
• Compatibility: iOS 7.0 or Later

1. On your phone, go to Settings Bluetooth. Turn on Bluetooth. Hold the CliqueFie remote button (about 3 seconds) until the LED light blinks. The blinking LED means it is in Discoverable mode.
2. When iPhone detects CliqueFie, tap “CliqueFie” to connect the device.
3. Then a message will pop up, please tap “Pair” to allow CliqueFie to connect with your device. When “CliqueFie” shows Connected under My Device, you are successfully connected to CliqueFie.
4. Now you can turn on the camera and have fun with CliqueFie Wireless Snapshot.

Notification

1. If the phone cannot search for nearby Bluetooth devices, please try more than one time or remove the battery and try again.
2. When you are finished, please turn off the Bluetooth. If you are not planning on using it for a length of time, please remove the battery.
3. Make sure your Volume key is in Shutter mode.
4. Please avoid using more than two CliqueFie devices at the same time.
5. If you still cannot connect the CliqueFie remote, please try to turn off the phone and turn it on again to reconnect.

Due to different brands and phones, if you have any further questions or problems, please contact CliqueFie Customer Support.

Wireless Snapshot

1. Button
2. Light
3. Hole
4. Battery cover

• No extra App needed: Connect via Bluetooth 4.2
• Bluetooth range : up to 10 M.
• Support for Android Version 6.0 or Later

Pairing the CliqueFie Bluetooth Remote with Your Mobile Phone

1. On your phone, go to Settings Bluetooth, then turn on Bluetooth.

2. Hold the CliqueFie remote button (about 3 seconds) until the LED light blinks. The LED blinking means is in Discoverable mode. When “CliqueFie” shows on the Available Devices, tap it to connect.

3. When the text “Cliquefie” moves to Paired Devices, then you are all set. If not, please repeat the previous steps.

4. Now, you can turn on your camera and enjoy CliqueFie. *Some devices might need to switch camera settings to allow the remote to work. Please go to Camera Settings
   Use Volume key as Shutter

5. If the phone cannot search for nearby Bluetooth devices, please try more than one time or remove the battery and try again.

6. When you are finished, please turn off the Bluetooth. If you are not planning on using it for a length of time, please remove the battery.

7. Make sure your Volume key is in Shutter mode.

8. Please avoid using more than two CliqueFie devices at the same time.

9. If you still cannot connect the CliqueFie remote, please try to turn off the phone and turn it on again to reconnect.

Due to different brands and phones, if you have any further questions or problems, please contact CliqueFie Customer Support.

www.cliquefie.com

Documents / Resources

| CliqueFie Max Selfie Stick Wireless Snapshot [pdf] User Manual
2AFG8BT400, bt400, BT400 Wireless Snapshot, Max Selfie Stick Wireless Snapshot, Max Selfie Stick Snapshot, Selfie Stick Wireless Snapshot, Wireless Snapshot
---|---

References

• Selfie Stick – Cliquefie
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>