GIGABYTE S251 Tank Server Installation Guide

GIGABYTE S251 Tank Server

Product Information: GIGABYTE Server Installation

The GIGABYTE server is designed to be installed into an immersion cooling tank. It is important to note that only licensed professionals are authorized to access the restricted access location where the installation is to take place. The server must be immersed in fluid before powering on, and it is essential to consult with the immersion cooling tank vendor to ensure compatibility and read their tank manual thoroughly. The power supply fan is disabled by default.

It is strongly recommended to use gloves when handling the coolant as it may contain hazardous materials. Handlers must read the material safety data sheet (MSDS) before handling the coolant for their safety. The thermal pad contains Indium foil, so it is also necessary to use gloves when replacing the thermal pad to avoid any contact with hazardous materials.

It is not recommended to install a GPU into the system without consulting GIGABYTE first, as doing so may cause compatibility issues.

Installation Instructions for GIGABYTE Server into a Tank

1. Attach the two carabiners to the server handles.
2. Ensure that the crane can handle at least 60 KG before installing the server into the tank.
3. Put the server into the tank vertically, ensuring that it is fully immersed in fluid before powering it on.

Installation Instructions for Thermal Pad to CPU

It is strongly recommended to use gloves and a mask when handling the thermal pad as it contains Indium foil.

1. Place the thermal pad at the bottom of the CPU heatsink.
2. Align the carrier assembly so that the triangle on the carrier aligns with the triangle on the heatsink.
3. Install the carrier assembly onto the bottom of the heatsink.

For more information about GIGABYTE servers, visit www.gigabyte.com/Enterprise

Installing Server

CAUTION!

• Make sure the crane can handle at least 60 KG before installing the server into a tank.
• Only licensed professionals are authorized to access the restricted access location.
• The power supply fan is disabled by default, so the server must be immersed in the fluid before powering on.
• Consult with immersion cooling tank vendor to ensure compatibility and read their tank manual thoroughly.
• Do not install a GPU into the system without consulting GIGABYTE first, doing so may cause compatibility issues.

DANGER!

• Strongly recommended to use gloves when handling the coolant.
• Before handling coolant, handlers must read the material safety data sheet (MSDS) for their safety.
• The thermal pad contains Indium foil, so it is strongly recommended to use gloves when replacing the thermal pad.

Installation

1. Attach the two carabiners to server handles.
2. Put the server into the tank vertically.

Installing Thermal Pad

DANGER!

• Strongly recommended to use gloves and mask when handling the thermal pad.
• The thermal pad contains Indium foil, so it is strongly recommended to use gloves when replacing the thermal pad.

Installation

1. Place the thermal pad at the bottom of the CPU heatsink

2. Align the carrier assembly so that the triangle on the carrier aligns with the triangle on the heatsink, and then install the carrier assembly onto the bottom of the heatsink.
   

3. When installing the heatsink to CPU, use a T30 Lobe screwdriver to tighten 4 captive nuts in sequence The screw tightening torque: 8 ± 0.5 kgf-cm.

Learn more about GIGABYTE server, visit www.gigabyte.com/Enterprise

• All specifications are subject to change without notice. Please visit our website for the latest information.
• All other brands, logos and names are property of their respective owners.

© 2023 Giga Computing Technology Co., Ltd. All rights reserved.

• Giga Computing
• @GIGABYTEServer
• GIGABYTEofficial
• GIGABYTEChannel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>