KUFATEC VW T7 ST Complete Set Front and Rear View Camera Instruction Manual
- June 11, 2024
- KUFATEC
Table of Contents
KUFATEC VW T7 ST Complete Set Front and Rear View Camera
Product Information
Complete Set Front and Rear View Camera
The Complete Set Front and Rear View Camera is a product that includes both front and rear view cameras for your vehicle. It allows you to have a clear view of your surroundings while driving, making it safer and easier to maneuver your vehicle. The product comes with an instruction manual that provides detailed information on how to install and connect the cameras.
Product Usage Instructions
Before using the product, please read the instruction manual carefully and thoroughly to ensure proper installation and usage. The following are the steps for installing and using the Complete Set Front and Rear View Camera:
Installation Instructions
- Refer to the cable routing and component positioning illustration in the manual.
- Follow the disassembly instructions for the front bumper, coverings, glove compartment, dashboard covering, load sill guard, side covering trunk, vehicle headliner, tailgate covering, and tailgate handle.
- Assemble the rear view camera according to the instructions provided.
- Route and connect the cables for the rear view camera.
- Assemble and connect the control unit and ground.
- Route the cable from the passenger’s side to the front driver’s side.
- Assemble and connect the front camera.
- Route and connect the cables for the front camera.
- Assemble the front bumper.
- Code with coding interface for additional vehicle function.
Usage Instructions
Once installed, the front and rear view cameras can be activated by pressing a button or automatically when shifting into reverse gear. Use the cameras to have a clear view of your surroundings while driving and maneuvering your vehicle.
Note: Always follow traffic rules and regulations while using the front and rear view cameras. Do not solely rely on the cameras and always check your surroundings before driving or maneuvering your vehicle.
Assembly Instructions
The following illustration shows the cable routing as well as the position of the individual components.
- Front Camera
- Fuse box/CAN gateway
- 17-pole plug (alternative CAN connection)
- Control unit
- Ground connection
- Rearview camera
Please be aware that this overview is only for illustration purposes. Always lay the cable set in the most convenient and shortest way possible. For a detailed description of the cable routing, please refer to the relevant sections of the following manual.
Kufatec GmbH & Co. KG
- Dahlienstr. 15 – 23795 Bad Segeberg
- e-mail: info@kufatec.de