RAZER Kaira X Wired Gaming Headset User Guide
- June 11, 2024
- Razer
Table of Contents
Kaira X Wired Gaming Headset
User Guide RAZER KAIRA FOR XBOX
MASTER GUIDE
Take your competitive advantage to the next level and exert true console dominance with the Razer Kaira for Xbox—a wireless Xbox Series X headset that offers superior audio immersion with our most powerful drivers ever, and crystal-clear voice comms with the best headset mic we’ve ever designed.
WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
▪ Razer Kaira for Xbox
A. Auto-adjusting headband
B. Breathable memory foam ear cushions
C. Game / Chat balance wheel
D. EQ / Xbox Pairing button
E. Bendable Razer™ HyperClear cardioid mic
F. Charging port
G. Power button
H. Status indicator
I. Volume wheel
J. Mic mute switch
▪ Charging cable
▪
Important Product Information Guide
WHAT’S NEEDED
-
Xbox One TM / Xbox One TM S / Xbox One TM X / Xbox Series TM X|S
OR -
PC (Windows® 10 64-bit or higher) with a free USB port*
-
Internet connection for app installation
*May require the Xbox Wireless Adapter for Windows 10 (not included).
SAFETY STATEMENT
IMPORTANT! Before using your Xbox console with this product, read its
instruction manual for safety, health, and other information regarding the use
of your Xbox console.
LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with a 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com Got a question? Ask the Razer Support Team at support.razer.com
TECHNICAL SPECIFICATIONS
HEADPHONES
- Frequency response: 20 Hz – 20 kHz
- Impedance: 32Ω at 1 kHz
- Sensitivity (@1 kHz): 108 dB
- Drivers: 50 mm, with Neodymium magnets
- Inner ear cup diameter: Width 56mm / Length 67mm
- Oval ear cushions: Designed for full-ear coverage with heat-transfer fabric, perfect for longwearing comfort
- Connection type: Direct to Xbox / via Xbox Wireless Adapter for Windows 10
- Wireless range: 10 m / 30 ft
- Wireless frequency: 2.4 GHz / 5 GHz
- Battery life: Up to 15 hours
MICROPHONE
- Frequency response: 100 – 10,000 Hz
- Signal-to-noise ratio: > 60 dB
- Sensitivity (@1 kHz): -54 ± 3 dB
- Pick-up pattern: Unidirectional
GETTING STARTED
CHARGING YOUR HEADSET Connect your Razer Kaira for Xbox to a powered USB
port using the charging cable. For best results, please fully charge your
headset before using it for the first time. A depleted headset will fully
charge in about 4 hours. While charging, your Razer Kaira for Xbox will
continuously show its battery level on the status indicator. PAIRING YOUR HEADSET
A. TO YOUR XBOX CONSOLE
- Press the Connect button on your console.
- Press and hold the power button until the status indicator is briefly lit or until you hear a tone.
- Wait until the status indicator becomes static green, indicating that the headset is now paired to the Xbox console.
**B. TO YOUR PC VIA XBOX WIRELESS ADAPTER FOR WINDOWS 10*
** Make sure that your Xbox Wireless Adapter for Windows 10 is up-to-date.
Some systems have Xbox Wireless built in which allows you to pair your headset
by using Bluetooth & other devices in Settings.
- Plug in your Xbox Wireless Adapter for Windows 10* to your PC and then press its Connect button.
- While powered off, press and hold the power button until the status indicator is lit, or until you hear a tone.
- Wait until the status indicator becomes static green, indicating that the headset is now paired to the wireless adapter.
USING YOUR RAZER KAIRA FOR XBOX
POWER BUTTON
Power on or off your headset by holding the power button until the status
indicator is on; and press and hold the button again to turn off. Two distinct
tones will help notify you that the headset is powered on or off.
BATTERY LEVEL
When unplugged and powered on, the status indicator will briefly show the
connection and battery status. While in use, there will be a tone notification
when the headset needs to be recharged; during such time, the indicator will
continue showing the battery status until you charge the
headset. EQ / XBOX PAIRING BUTTON
PAIRING MODE
When pairing the headset to a different Xbox console or wireless adapter, use
the EQ / Xbox Pairing button to activate its pairing mode. While powered on,
press and hold the EQ / Xbox Pairing button until the status indicator starts
to blink in green or until you hear a tone, indicating that the headset can
now be paired to a different Xbox console or wireless
adapter. EQ PRESETS
Double press the EQ / Xbox Pairing button to switch between the equalizer
presets available on the headset.
Preset | Description |
---|---|
Default | All-around balance of audio clarity and bass |
Bass Boost | Immerse more on solid, realistic bass |
FPS | Hear the most subtle of footsteps sneaking from behind |
Custom* | Your own custom balance of audio clarity |
This preset will only be available when you customize a preset on the Razer Headset Setup for Xbox app.
VOLUME WHEEL
Rotate the volume wheel to increase or decrease the
volume. GAME / CHAT BALANCE
Rotate the Game / Chat balance wheel to increase the in-game volume and
decrease the voice chat volume or vice versa. By default, the notch on the
wheel is set to the middle to indicate 50% chat and 50% game
volume. MICROPHONE
Bend the mic until it is parallel to your mouth. Make sure the mic diaphragm
is in front and the air vent is facing away from your mouth.
Slide the mic mute switch to mute or unmute the
microphone. COMFORT
It’s recommended to gently stretch the headset before placing it over your
head to minimize headband stress however, don’t stretch the headset beyond its
limits. RAZER HEADSET SETUP FOR XBOX APP
Use the Razer Headset Setup for Xbox app to personalize your own EQ preset
which you can set as the Custom preset of your headset, enable mic monitoring
to hear your own voice through the headset, and even adjust other mic features
for a truly immersive gaming experience.
Download and install the Razer Headset Setup for Xbox app from the Microsoft Store on your gaming console or PC.
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Kaira for Xbox, we
suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go to
support.razer.com for assistance.
Do not take apart the device (doing so will void your warranty) and do not
attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
Should the temperature exceed this range, unplug and/or switch off the device
in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in
lowered awareness of your external surroundings. Please remove the device when
engaging in any activities that requires active awareness of your
surroundings.
Listening to excessively loud volumes over extended periods of time can damage
your hearing. Furthermore, legislation of certain countries permits a maximum
sound level of 86db to affect your hearing for 8 hours a day. We therefore
recommend that you reduce the volume to a comfortable level when listening for
prolonged periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Kaira for Xbox requires minimum maintenance to keep it in optimum
condition. Once a month we recommend you clean it using a soft cloth or cotton
swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2020 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, and “For Gamers. By Gamers.” are trademarks or registered
trademarks of Razer Inc. and/or affiliated companies in the United States or
other countries. All other trademarks are the property of their respective
owners.
Microsoft, Xbox, Xbox “Sphere” Design, Xbox One and Xbox Series X|S are
trademarks of the Microsoft group of companies. All other trademarks are the
property of their respective owners. Razer Inc. (“Razer”) may have copyright,
trademarks, trade secrets, patents, patent applications, or other intellectual
property rights (whether registered or unregistered) concerning the product in
this guide. Furnishing of this guide does not give you a license to any such
copyright, trademark, patent or other intellectual property right. The Razer
Kaira for Xbox (the “Product”) may differ from pictures whether on packaging
or otherwise. Razer assumes no responsibility for such differences or for any
errors that may appear. Information contained herein is subject to change
without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit
razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of distribution of, sale of, resale of, use
of, or inability to use the Product. In no event shall Razer’s liability
exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased. If any term herein is held to
be invalid or unenforceable, then such term (in so far as it is invalid or
unenforceable) shall be given no effect and deemed to be excluded without
invalidating any of the remaining terms. Razer reserves the right to amend any
term at any time without notice.
References
- 7.1 Surround Sound | Razer United States
- Razer Warranty Policy | Razer United States
- Razer ID
- Razer ID
- support.razer.com
- support.razer.com/
- 7.1 Surround Sound | Razer United States
- Razer ID
- Razer ID
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>