Verbatim UTA-04 Universal Travel Adapter Worldwide Plug User Guide

Verbatim UTA-04 Universal Travel Adapter Worldwide Plug

Product Information

The Universal Travel Adapter with 1 x USB-C PD 61W & QC 3.0, 1 x USB-C, and 3 x USB-A is a multi-socket adapter equipped with safety shutters for child protection, a status LED, and spare fuse. It has adapter plug switches and a multi-plug that accepts Type A, B, C, E, F, G, I, J, and L plugs. The adapter is compatible with most USB devices and suitable for use with most electronic devices up to 2500W at 250V and 1000W at 100V.

Product Usage Instructions

1. Before use, move all sliders on the side completely back into their starting positions.
2. Connecting:
3. Insert the adapter into the socket. The Status LED will light up. If not, check the fuse.
4. Insert the plug of your device into the adapter.
5. Connectivity:
6. The following plug types are accepted by the adapter: Type A, B, C, E, F, G, I, J, and L.
7. The travel adapter can be plugged into the following Type outlets: Type A, B, C, D, E, F, G, H, I, J, K, L, M, N, and O. Check the related product page on the website for country compatibility.
8. Selecting your plug:
9. Find the power outlet of the country you want to plug your device into. The country outlets are shown next to the plugs.
10. Gently press the required slider and move it forward to the other side until the plug comes completely out and locks.
11. To recover the plug, press and hold the slider, release the hold position, and continue to slide it back to the other side until the plug is pushed completely back inside of the adapter.
12. For AUS only: Turn the two connector contacts outwards until they form an inverted “V”.
13. Connect the adapter to the socket.
14. Changing the fuse:
15. Before removing the fuse, unplug the travel adapter from the socket and disconnect all connected devices. If the device was flooded with water or is wet, do not use until fully dried.
16. Pull out the fuse holder and remove the fuse.
17. Firmly press and turn the spare fuse cover and remove the spare fuse.
18. Place the spare fuse in the fuse holder and stick it back into the adapter.
19. Close the replacement cover.
20. Get a new replacement fuse: 250V 10A, BS1362 approved.

Overview

1. Multi-socket with safety shutter for child protection
2. Status LED
3. 3 x USB-A
4. 1 x USB-C
5. 1 x USB-C PD/QC
6. Spare fuse
7. Fuse
8. Adapter plug switches
9. Multi-plug

Connecting

• a. Please insert the adapter into the socket. The Status LED will light up.
  If not, please check the fuse.

• b. Then insert the plug of your device into the adapter.

1. The following plug types are accepted by the adapter:
   Please notice that following plugs are not compatible:

2. You can plug the travel adapter into the following Type outlets.

Please find a full list of country compatibility on the related product page on our website.

2-POLE UNEARTHED DEVICES

The travel adapter is suitable for use with most electronic devices up to 2500W at 250V and 1000W at 100V.

The travel adapter is compatible with most USB devices.

Attention

Before use, move all sliders on the side completely back into their starting positions.

Selecting your plug

Find the power outlet of the country you want to plug your device into. The country outlets are shown next to the plugs.

1. Gently press the required slider and move it forward to the other side, until the plug comes completely out and locks.
2. Recover the plug: Please press and hold the slider. Release the hold position and continue to slide it back to the other side, until the plug is pushed completely back inside of the adapter.
3. For AUS only: Turn the two connector contacts outwards until they form an inverted „V“.
4. Now you can connect the adapter to the socket.

Changing the fuse

The travel adapter is equipped with a fuse, which automatically switches off if the adapter is overloaded. This happens when the current input from the socket exceeds 10A or the terminal used requires more than 2500W at 250V or 1000W at 110V.

Before removing the fuse, unplug the travel adapter from the socket and disconnect all connected devices. If device was flooded with water or is wet, do not use until fully dried.

1. Pull out the fuse holder and remove the fuse.
2. Firmly press and turn the spare fuse cover and remove the spare fuse.
3. Place the spare fuse in the fuse holder and stick it back into the adapter.
4. Close the replacement cover.
5. Don‘t forget to get a new replacement fuse. Replacement fuse: 250V 10A, BS1362 approved.

Safety Instructions

• Protect the product from dirt, moisture and overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Use the product only for the intended purpose.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Keep the packaging in a safe place for future reference. It contains important information.
• The product is intended only for use inside buildings.
• Only use the article under moderate climatic conditions (0°C-35°C, humidity below 80%).
• Do not use the product in areas in which electronic products are not permitted.
• Do not use the product in a damp environment and avoid splashing water.

Operation Warnings

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Before connecting a device, check whether it is suitable for the voltage/mains frequency available in the country.
• Do not operate the product continuously, as it is not designed for this.
• Do not continue to operate the product if it is visibly damaged.
• The product is not designed for operation with other adapters.

Care and maintenance

• Disconnect the device from the mains before cleaning and during prolonged periods of non-use.
• Only operate the product from a socket that has been approved for the device. Plug devices directly into the adapter and the adapter directly into the socket.
• To disconnect please remove all devices from the adapter before removing the adapter from the socket.

Specifications

• AC input: 100-250V~, 50-60Hz, 0.8A
• Rating: 100-250V~10A max. 2500W max.
• Single port output mode
• USB-C1 PD/QC: 5.0V 3.0A 15.0W, 9.0V 3.0A 27.0W, 12.0V 3.0A 36.0W, 15.0V 3.0A 45.0W, 20.3V 3.0A 61.0W
• USB-C2: 5.0V 2.4A 12.0W
• USB-A1/2/3: 5.0V 2.4A 12.0W
• Combined output mode
• USB-C1 PD/QC: 5.0V 3.0A 15.0W, 9.0V 3.0A 27.0W, 12.0V 3.0A 36.0W, 15.0V 3.0A 45.0W, 20.3V 2.25A 45.0W
• USB-C2: 5.0V 2.4A 12.0W, USB-A1/2/3: 5.0V 2.4A 12.0W
• Total DC output: 61.0W
• Fuse: BS1362 compliant
• Safety shutter for child protection (can only be opened with force of more than 75N (7.5Kg) per hole)
• Material: Fireproof polycarbonate
• Dimensions: 75mm x 50mm x 54mm
• Weight: 180g
• Operating temperature: 0 – 35°C

CAUTION

• Before use, please read this instruction carefully! This product does not convert voltage (AC-AC), to avoid possible damage to your device or other safety hazards, please make sure the power outlet you intend to use has the proper voltage to run your device before using this adapter.
• Each country has its own regulations regarding the use of travel adapters, please check in each country before use.
• No grounding: This product is for use with unearthed or double insulated appliances only.
• lndoor use only.

CAUTION
Misuse can lead to electrical shock.

Verbatim Limited Warranty Terms

Verbatim GmbH warrants this product to be free from defects in material and workmanship for a period of 2 years from date of purchase. This warranty excludes batteries. If this product is found to be defective within the warranty period, it will be replaced at no cost to you. You may return it with your original cash register receipt to the place of purchase or contact Verbatim. Product replacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage resulting from abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific computer software or hardware used.
VERBATIM WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state or country to country.

Note
Verbatim GmbH may at any time revise the content of this user guide without further notice.

Rights
Copyright © 2022 Verbatim GmbH. No part of this document may be reproduced in any form or by any means, for any purpose, without the express written permission of Verbatim GmbH. All rights reserved.
All other brands and product names referenced herein are property of their respective owners.

CE Declaration

Complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EC) and General Product Safety Directive (2001/95/EC).
This declaration applies to all specimens manufactured identical to the model submitted for testing/evaluation.
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013

RoHS Compliance
This product is in compliance with Directives 2011/65/EU and 2015/683 of the European Parliament and of the Council of 18th December 2006, on the restriction of the use of hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
Substances of Very High Concern (SVHC) including 224 substances contained in Candidate List of June 10th 2022 are not present in this product range above permitted levels.

WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.
The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local municipal household waste disposal service or shop from where you purchased the equipment.

Triman (Only for France)
The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Technical Support

If you have any questions about this product, please contact the Verbatim support team – www.verbatim.com/support.

References

• Support Center | Verbatim: Digital Media Storage Solutions, USB Flash Drives, External Hard Drives, SD Memory Cards

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>