hansgrohe Metropol, Logis Fine, Rebris S, Rebris E Mixer Instruction Manual

hansgrohe Metropol, Logis Fine, Rebris S, Rebris E Mixer

Product Information

The product is a bathing, hygienic and body-cleaning device. It is exclusively designed for drinking water and must not be used for any other purpose. The product requires equal pressures of hot and cold water supplies for optimal performance. The operating pressure of the product should not exceed 1 MPa, and the recommended operating pressure is between 0.1 to 0.5 MPa. The product has a test pressure of 1.6 MPa. The product comes with a flow limiter that ensures maximum water flow rate does not exceed the recommended limit.

Technical Data

• Operating Pressure: max. 1 MPa
• Recommended Operating Pressure: 0.1 – 0.5 MPa
• Test Pressure: 1.6 MPa
• Hot Water Temperature:
• Maximum Water Flow Rate: As per the flow limiter

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The product may only be used for bathing, hygienic and body cleaning purposes.
• The hot and cold supplies must be of equal pressures.

Installation Instructions

• Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
• The plumbing codes applicable in the respective countries must be observed.
• The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
• If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.

Product Usage Instructions

The product is designed for use as a bathing, hygienic and body-cleaning device. To ensure optimal performance, the hot and cold water supplies must have equal pressures. When using the product, please follow the operation instructions provided on page 41 of the user manual. Please note that the first half-liter of water drawn from the product in the morning or after a prolonged period of non-use should not be used for drinking purposes. When adjusting the hot water limiter, please refer to page 37 of the user manual. It is not recommended to use a hot water limiter in combination with a continuous-flow water heater.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)

• Operating pressure: max. 1 MPa
• Recommended operating pressure: 0,1 – 0,5 MPa
• Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 60°C
• Thermal disinfection: 70°C / 4 min

The product is exclusively designed for drinking water!

Symbol Description

Do not use silicone-containing acetic acid!

Adjustment

To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not recommended.

Dimensions

Flow diagram

Spare parts

• XXX = Colors
• 000 = Chrome Plated
• 340 = Brushed Black Chrome
• 670 = Matt Black
• 700 = Matt White
• 990 = Polished Gold-Optic

Special accessories (order as an extra)

• extension 25 mm #31971000

Cleaning

Operation

Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.

Test certificate

Assembly

Warranty

Contact

www.hansgrohe.com/cleaning-recommendation

Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach
Telefon + 49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com

References

• Taps for bathrooms, showers and kitchens
• Taps for bathrooms, showers and kitchens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>