VONYX WM82 Series Wireless UHF Microphone Instruction Manual

: June 9, 2024
: VONYX

Table of Contents

VONYX WM82 Series Wireless UHF Microphone
Product Information
Precautions
Product Usage Instructions
UNPACKING INSTRUCTION
POWERSUPPLY
FRONT- AND BACKPANEL
UHF HANDHELD
UHF BODYPACK
HEADSET MICROPHONE
OPERATION
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VONYX WM82 Series Wireless UHF Microphone

Product Information

The Vonyx WM82 Series Wireless UHF Microphone is a high-quality microphone that provides clear and reliable audio. It is available in three different models: Ref. nr. 179.212, Ref. nr. 179.214, and Ref. nr. 179.215. The microphone contains voltage carrying parts, and it should not be opened under any circumstances.

Precautions

Read the manual thoroughly before using the product.
Follow the instructions to avoid invalidating the warranty.
Avoid fire and electrical shock by taking all necessary precautions.
Repairs must only be carried out by a qualified technician.
Do not place metal objects or pour liquids into the product.
Do not place the product near heat sources or on a vibrating surface.
Do not cover the ventilation holes.
The product is not suitable for continuous use.
Be careful with the mains lead and do not damage it.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer.
Do not connect the product to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the product to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
Keep the product out of the reach of children. Do not leave the product unattended.
Do not use cleaning sprays to clean switches.
Do not force the controls.
If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
If the product has built-in lead-acid rechargeable battery, please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.

Product Usage Instructions

Prior to using the product, ask advice from a specialist.
When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
Do not repeatedly switch the product on and off as it shortens the lifetime.
Keep the product at least 60cm away from computer or TV if it has a speaker inside that can cause a magnetic field.
If the product has built-in lead-acid rechargeable battery, recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
To use the product, connect it to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
If the product has not been used for a longer period of time, let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
Do not force the controls or repeatedly switch the product on and off.
Do not use cleaning sprays to clean switches.
If the product malfunctions, always seek advice from a specialist.

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The product contains voltage carrying parts. Therefore, do NOT open the housing.
Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
The product is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the product from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the product with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the product to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
Do not repeatedly switch the product on and off. This shortens the lifetime.
Keep the product out of the reach of children. Do not leave the product unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
If the product has built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
If the battery is damaged, please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
Keep the original packing material so that you can transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard. This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to. The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!

NOTE : To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

DISPOSAL
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and may be used. No dimmer or adjustable power supply. Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

FRONT- AND BACKPANEL

VONYX-WM82-Series-Wireless-UHF-Microphone-FIG-1

LCD Display
Volume Channel A
Volume Channel B
Power On/Off
3-pin XLR Balanced output Channel B
3-pin XLR Balanced output Channel A
Jack 6.35mm (¼”) output connector
Power input (12V DC 1A)
Antenna

Models:

179.212 : WM82 UHF Microphone System 2 channel handheld microphone
179.214 : WM82B UHF Microphone System 2 channel bodypack + headset

UHF HANDHELD

VONYX-WM82-Series-Wireless-UHF-Microphone-FIG-2

Grille : Protects the cartridge and help reducing the breath sounds and wind noise.
Display
Power ON/OFF Switch.
Low battery indicator : Red light glows when the power is low and change the battery.
Battery Cover : Open it to install the battery. remove batteries in case of long time no use (prevent leakage).

Attention : If the microphone are not used for a longer period, please remove the batteries to prevent damage in case of battery leakage!

UHF BODYPACK

Power ON/OFF
Microphone input Jack for headset.
Antenna
Power On/Off LED indication
Battery Cover: Open it to install the battery.
Display
Belt Clip

Attention : If the bodypack are not used for a longer period, please remove the batteries to prevent damage in case of battery leakage!

HEADSET MICROPHONE

Connect the connecter of supplied headset microphone to the connecting jack of transmitter (Shown as below). Set the transmitter work state in wireless headset system (6).

OPERATION

Switch on the microphone receiver with the power switch. The display indicates the preset transmission channels and frequencies.
Switch on the hand-held microphone or bodypack. The power indicator lights. If it fails to light up, a new battery must be inserted.
Switch on the following audio unit (e.g. amplifier or mixer).
Speak into each microphone and match the output level of the receiver to the input of the following unit with the respective level control.
After operation switch off the receiver and the microphones.

For optimum receiving:

Make sure that maintain a line-of-sight between the microphones and receiver antennas.
Make sure the distance between the microphones and the receiver is not too long.
Make sure the reception is not disturbed by objects in the transmission path, avoid metal or other dense materials may be present and computers or other HF-generating equipment.
Make sure the batteries of are always sufficiently charged.

TECHNICAL SPECIFICATION

| WM82| WM82B| WM82C
---|---|---|---
Ref.nr:| 179.212| 179.214| 179.215
Frequency range EU:| 863.100Mhz – 864.500Mhz Class1
RF Output EU:| <10mW
Frequency range AUS/NZ:| 578.75MHz – 571.30MHz
RF Output AUS/NZ:| <100mW
Frequency response:| 30Hz – 20kHz
Audio Dynamic Range:| > 85dB
T.H.D.:| <0.5%
Class:| II
Rated voltage:| 240 Volt AC 50Hz
Dimensions:| 176 x 130 x 42mm
Weight:| 0,7kg
| Handheld| Bodypack
---|---|---
Frequency range EU:| 863.100Mhz – 864.500Mhz Class1
Frequency range AUS/NZ:| 578.75MHz – 571.30MHz
Battery:| 2x AA
Dimensions:| 240 x Ø51mm| 115 x 65 x 20mm
Weight:| 0,35kg| 0,2kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. The products referred to in this manual is conforming European and UK legislation directives to which they are subject:

European Union
Tronios B.V., Bedrijvenpark Twente Noord 18, 7602KR Almelo, The Netherlands