TOOWELL B0BP13J92C Battery Operated Motion Sensor Outdoor Lights User Manual

Table of Contents

TOOWELL B0BP13J92C Battery Operated Motion Sensor Outdoor Lights

TOOWELL B0BP13J92C Battery Operated Motion Sensor Outdoor
Lights

What is included per light:
4 screws and 4 anchors

What you need to install:
1screwdriver(phillips)
1screwdriver(flathead)
1drill(1/4”drill bit)
4 D-cell alkaline batteries

Lumen: 480

Motion sensing Range :30ft

Lighting Coverage : 800 sq.ft

Auto Shut Off : 20 seconds

1.Adopt wireless wall-mounted design, and recommended installation height is 6.56ft-13.12ft, the best installation height is 8ft-9ft. Tips: Do not support evea -mounted and make sure the detector is inclined downward.
Flood light will be activated when detect motion and stay on for 20s (when the ambient light is lower than 15LUX).Stay off at the daytime(only sensing motion in darkness).
Dual head support 135°up to down,180°side to side pivot adjustable.
Install batteries with polarity in correct position and use only brand new set of 4*D-cell alkaline batteries with 1.5V. Do not mix old and new batteries which may cause the light to malfunction.
Light may activate when batteries are inserted. If not, simply take light to a dark room, allow batteries to settle, then test activation.
If your light will not turn off, it means it is time to replace the batteries.
To prolong battery life we set the light with 480 Lumen that output decent brightness, if you want to get more lumens or have other problem on product, please contact us through e-mail as follow：

Use a flat head screwdriver to remove mounting plate
Correctly set up the”+” and “_” poles of batteries in groove (Batteries not included)
Caution: Align the arrows make sure the battery lid installed correctly
Twist the screws in tightly with a flat head screwdriver to activate the weatherproof seal
Mark the fixed position and fix the mounting plate on the wall
Line up the light with the mounting plate and slide the light into grooves