ZTE Default Usernames & Passwords Guide
- October 29, 2023
- ZTE
Table of Contents
ZTE Default Usernames & Passwords Guide
The default credentials needed to login to your ZTE router
The majority of ZTE routers have a default username of admin, a default
password of admin, and a default IP address of 192.168.1.1. These ZTE
credentials are needed when a login to the ZTE router’s web interface to
change any settings. Since some of the models don’t follow the standards, you
can see those in the table below. Below the table are also instructions on
what to do in case you forget your ZTE router password, need to reset your ZTE
router to its factory default password, or the password reset doesn’t work.
Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model
number.
ZTE default Password List (Valid April 2023)
Model| | Default Username
Default Password| Default IP address
MF10
MF10 default factory settings| admin| admin| 192.168.0.1
WF820+
WF820+ default factory settings| 1admin0| ltecl4r0|
192.168.1.1
WF831
WF831 default factory settings| admin| admin| |
192.168.0.1
ZXDSL 831CII
ZXDSL 831CII default factory settings| admin| admin|
192.168.1.1
ZXDSL 831II
ZXDSL 831II default factory settings| admin| admin|
192.168.1.1
ZXDSL 931WII V1
ZXDSL 931WII V1 default factory settings| admin| admin|
192.168.1.1
ZXHN H118N
ZXHN H118N default factory settings| admin| –|
192.168.0.1
ZXHN H118Na v2.
ZXHN H118Na v2.3 default factory settings | admin| –|
192.168.0.1
ZXHN H218N v1
ZXHN H218N v1 default factory settings| admin| admin|
192.168.1.1
ZXHN H267A
ZXHN H267A default factory settings| admin| | public
192.168.1.1
ZXHN H367A
ZXHN H367A default factory settings| admin| admin|
192.168.1.1
ZXV10 H618B
ZXV10 H618B default factory settings| useradmin| –|
192.168.1.1
Instructions and common questions
Forgot your ZTE router password?
Have you changed the username and/or password of your ZTE router and
forgotten what you changed it to? Don’t worry: all ZTE routers come with a
default factory-set password that you can revert to by following the
instructions below.
Reset ZTE router to default password
If you decide to revert your ZTE router to its factory defaults, you should do the 30-30-30 reset as follows:
- When your ZTE router is powered on, press and hold the reset button for 30 seconds.
- While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
- while still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds. Your ZTE router should now be reset to its brand-new factory settings, Check the table to see what those are (Most likely admin/admin). If the factory reset didn’t work, check out the ZTE 30 30 30 factory reset guide.
Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).
I still can’t access my ZTE router with the default password
make sure that you have followed the reset instructions correctly as the ZTE
routers should always revert to their factory default settings when reset.
Otherwise, there is always the risk that your router is damaged and might need
to be repaired or replaced
REFERENCE LINK
https://www.router-reset.com/default-password-ip-list/ZTE