JLL Fitness IC100 Pro Monitor Instruction Manual
- June 9, 2024
- JLL Fitness
Table of Contents
JLL Fitness IC100 Pro Monitor
IC100 PRO MONITOR
The IC100 Pro monitor is a fitness monitor manufactured and owned by JLL Fitness Ltd. The monitor has been tested to meet the required standards and passed regulations as shown by the symbols on the product. The monitor has a total of 4 readouts which display time, speed, distance, and calories. It is equipped with a single button for operation and can be reset to zero by pressing and holding the button for a few seconds.
SAFETY PRECAUTIONS
It is important to follow the safety precautions when using the IC100 Pro
monitor. The monitor should only be cleaned using a soft dry cloth and no
cleaning chemicals or water should be applied directly to the monitor as it
may damage the internal components.
INSTALLATION
The installation of the IC100 Pro monitor involves inserting the batteries correctly, connecting male to female wires from the base to the monitor, and securing the monitor to the frame using four screws.
OPERATION
When first powered on, the monitor will automatically be in `Scan’ mode. To exit scan mode, press the single button on the monitor and continuously press it to view each readout. To reset all readings to zero, press and hold the button for a few seconds.
DATA READOUTS
| Readout | Measurement |
|---|---|
| Time | Minutes: Seconds |
| Speed | MPH |
| Distance | Miles |
TROUBLESHOOT
| Issue | Resolutions |
|---|---|
| No power to the monitor | Check if the batteries are inserted correctly and |
fully
charged.
No pulse reading| Ensure the monitor is in contact with the body and placed in
the correct position.
PRECAUTIONS
The monitor on this machine has been tested to the required standards, each
of those passed regulations are shown via the following symbols:
- WEEE – Waste Electrical and Electronic Equipment Recycling.
- ABS – Acrylonitrile Butadiene Styrene often referred to as ABS is a type of plastic that is an opaque thermoplastic.
- CE – The product conforms with relevant EU directives regarding health and safety or environmental protection.
- QC Pass – A product which has fulfilled the requirements of a technical control and passed the outgoing exams.
- ROHS – This is an abbreviation for “Restriction of (the use of certain) Hazardous Substances in electrical and electronic Equipment”.
ABS Recycling Symbol
CLEANING
Please take care when cleaning this monitor as the LCD screen can easily be
scratched.
You will need a soft dry cloth
Do not spray cleaning chemicals directly onto the monitor
Do not apply water to the monitor as it is electrical and may damage the
internal components
Set up
- Insert the batteries, making sure they are the correct way round.
- Remove the four screws already in the back of the monitor.
- Connect the male-to-female wires from the base to the monitor.
- Secure the monitor to the frame using the four screws removed previously.
PRODUCT OPERATION
The IC100 Pro monitor has a total of 4 readouts, displaying:
Time Speed Distance Calories When first powered on, the monitor will
automatically be in ‘Scan’ mode. This means the digits on the screen will
change every few seconds between time, distance, speed etc. This will allow
you to have an overview while training without pressing any buttons.
EXITING SCAN MODE
On this monitor there is only one button, press this to exit scan mode and
continuously press it to view each readout.
RESETTING YOUR MONITOR
To reset all of the readings to zero, press and hold the button for a few
seconds. You will then see the digits flash zero’s and the monitor will beep.
COPYRIGHT
The contents of this manual are subject to change without notice to improve
quality.
© 2023 JLL Fitness Ltd
JLL Fitness Ltd owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the
authorization of JLL Fitness Ltd is prohibited.
CONTACT DETAILS
Contact JLL Fitness Ltd at
Tel: 0121 328 7507,
Email: [email protected]
or Live Chat: www.jllfitness.co.uk for any
queries or assistance.