Govee H61C3 RGBIC LED Neon Rope Light for Desks User Manual
- June 9, 2024
- Govee
Table of Contents
- Introduction
- What You Get
- At a Glance
- Installing Your Device
- Pairing Your Device with the Govee Home App What You Need
- Controlling the Device with Your Voice
- Specifications
- Troubleshooting
- Customer Service
- FCC and ISED Canada Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Manual
Model: H61 C3
Govee RGBIC LED Neon Rope Light for desks
Introduction
Thanks for choosing the Govee RGBIC LED Neon Rope Light for desks. The 3-meter neon rope light supports Bluetooth, voice control (Alexa/Google Assistant) which can bring the decor of your desks to a higher level with RGBIC lighting effects.
What You Get
LED Neon Rope Light 1
Adapter 1
User Manual 1
Service Card 1
Internal Angle Cover 1
End Cap 1
At a Glance
Installing Your Device
Before You Install
- Unpack the box and check all items listed in the packing list.
- Power on the neon rope light and check whether it lights up.
Installing Steps
-
Wipe the surface to make sure it’s clean and dry.
-
If your desk is L-shaped (or has an internal angle), please stick the internal angle cover to the corner first. Firmly press the internal angle cover for lOs to make sure it snugly sticks to the corner.
-
Peel off the protective film and carefully stick the rope light to the edges little by little. Firmly press the rope light for 10s, especially at the corner, to make sure it snugly sticks to the edges.
-
Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effects.
-
Power on the neon rope light and start using.
Pairing Your Device with the Govee Home App What You Need
- A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
- A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).
Pairing Instructions
- Download the Govee Home app from the App Store (i05 devices) or Google Play (Android devices).
- Turn on Bluetooth on your smartphone.
- Open the app, tap the “+” icon in the top right corner and search for “H61 C3”.
- Tap the device icon and follow the on-screen instructions to complete pairing.
Controlling the Device with Your Voice
- Open the app, then tap the device icon to enter detail page.
- Tap the setting icon in the top right corner.
- Select Using Guidance and follow on-screen instructions to control the device using your voice.
Specifications
Power Input (Adapter) | 100-240VAC 50 / 60Hz |
---|---|
Power Input (LED Strip Light) | 24VDC 1.5A |
Light Displaying Technology | RGBIC |
Length | 3m / 9.Sft |
Control Method | APP,Control Box,Voice Control |
Troubleshooting
-
The adhesive has poor retention
• Make sure the installation surface is clean and dry.
• Firmly press over the strip after sticking. -
Cannot connect to Bluetooth.
• Do not skip Bluetooth connection in the app.
• Ensure Bluetooth on your smartphone has been turned on.
• Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
• Power the neon rope lights and your smartphone Bluetooth off then on, then try again
• Ensure that your smartphone is within 1m/3.28ft of the neon rope lights when connecting.
• Clear any obstructions that are between the neon rope lights and your smartphone -
The neon rope lights does not display the full selected color/Some LED beads do not light up.
• Please contact the Govee support team for rapid product replacement. -
Cannot sync the neon rope lights to the beat of my music.
• Move the control box closer to the music source.
• Clean the (Mc on the control box then try again. -
Cannot connect to WI-H.
• Do not skip the Wi-Fl connecting steps in the app.
• 561-1z network is not supported. Please set the router to 2.46Hz and then reset it.
• Connect your phone to Wi-Fl and check whether the network works well.
• Make sure you have entered the correct Nfi-Fi name and password.
• Change your WI-14 password to a brief one. 8 numbers and letters are suggested.
• Connect hotspot in your phone to the neon rope lights and check whether the router works with the neon rope lights. -
Cannot connect to Alexa.
• Pull out every connective part of the neon rope lights and firmly re-connect them.
• Re-connect your phone to Wi-Fi.
• Plug out the adapter port and re-plug it in.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@govee_official
@govee.officia
@Goveeofficial
@Govee.smarthome
FCC and ISED Canada Statement
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation. Warning: Changes or modififications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 2501 Chatham Rd Suite R Springfield IL 62704
Email: support@govee.com
Contact information: https://www.govee.com/support
FOR INDOOR USE ONLY
To reduce the risk of strangulation, the flexible wiring connected to this
luminaire shall be effectively fixed to the wall if the wiring is within arm’s
reach.
The trademark Govee has been authorised to Shenzhen Qianyan Technology LTD.
Copyright ©2021 Shenzhen Qianyan Technology LTD. All Rights Reserved.
For FAQs and more information,
please visit: www.govee.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>