Tilta TA-T19-FCC Sony A7C Rig for Handheld Filming Instruction Manual
- June 9, 2024
- TILTA
Table of Contents
- Tilta TA-T19-FCC Sony A7C Rig for Handheld Filming
- Product Information: Sony A7C Rig
- Accessories included
- Cage Features
- Installation Instructions
- Installing Top Handle
- Installing Side Handle & Side Handle Attachment
- OVERVIEW
- INSTALLING THE CAGE
- INSTALLING WOODEN HANDLE & COLD SHOE MOUNT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Tilta TA-T19-FCC Sony A7C Rig for Handheld Filming
Product Information: Sony A7C Rig
The Sony A7C Rig is a camera cage designed to fit the Sony A7C camera. It comes with various accessories that can be attached to and used with the cage such as a quick release top handle, single rod holders, lens adapter support, side handle attachment, and more. The cage has multiple screw holes and mounts for attaching additional accessories like an EVF bracket, HDMI clamp, microphone, and more.
Accessories included
- Full Camera Cage for Sony A7C (TA-T19-FCC)
- Tiltaing Lightweight Quick Release Top Handle (TA-QRTH3)
- 15mm Bottom Single Rod Holder (TA-BSRA-15)
- EF Mount Lens Adapter Support for Sony A7C (TA-T19-LAS)
- 15mm Side Single Rod Holder (TA-SRA-15)
- Manfrotto Quick Release Plate for Sony A7C (TA-T19-QRBP1)
- 15mm LWS Baseplate (TA-T08-BSP)
- Tiltaing Advanced Side Handle Attachment Type VII (TA-AHA7-LR)
- Tiltaing Left Side Advanced Focus Handle (F570 Battery) (TA-LFH-57)
- Tiltaing Left Side Wooden Handle (TA-LWH)
- Tiltaing Cold Shoe Receiver Attachment (TA-CSR-GD)
Cage Features
- Mounting hole for 15mm bottom single rod holder
- Lens adapter support screw hole
- Mounting hole for 15mm side single rod holder
- Right side wrist strap holder
- 1/4-20 screw hole (for installing NATO rail and side handle)
- Left side strap holder
- 1/4-20 screw holes with locating points (for HDMI clamp attachment)
- 1/4-20 screw hole
- Cold shoe mount (for installing top handle)
- Cold shoe mount (for installing microphone, additional light, etc.)
- Camera security screw hole
- ARCA standard 38mm mount (can mount onto RS 2 directly)
Installation Instructions
Installing the Cage
- Take out the 1/4-20 screw from the bottom of the cage.
- Place the Sony A7C in the camera cage.
- Insert the 1/4-20 screw into the screw hole and tighten the screw.
Installing Top Handle
Note: Quick Release Top Handle is optional.
- Slide the top handle into the cold shoe mount on top of the cage.
- Tighten the tie-down screw.
Installing Side Handle & Side Handle Attachment
- Align the M3 screw holes on the focus handle with the left-side handle attachment. Tighten the screws.
- Align the focus handle with the 1/4-20 screw hole on the side of the cage.
- The focus handle has USB-C 8v and DC 12v outputs. Please check and connect your equipment accordingly. Tilta is not responsible for any user errors.
OVERVIEW
Each of the following accessories can be attached to and used with the cage.
- Mounting hole for 15mm bottom single rod holder
- Lens adapter support screw hole
- Mounting hole for 15mm side single rod holder
- Right side wrist strap holder
- 1/4”-20 screw hole (for installing NATO rail and side handle.)
- Left side strap holder
- 1/4”-20 screw holes with locating points (for HDMI clamp attachment.)
- 1/4”-20 screw hole
- Cold shoe mount (for installing top handle.)
- Cold shoe mount(for installing microphone, additional light, etc.)
- 1/4”-20 screw hole
- 1/4”-20 screw hole (for installing Manfrotto and ARCA plate.)
- Camera security screw hole
- 1/4”-20 screw hole (for installing Manfrotto and ARCA plate.)
- ARCA standard 38mm mount (can mount onto RS 2 directly.)
INSTALLING THE CAGE
ASSEMBLY
- Take out the 1/4”-20 screw from the bottom of the cage. Place the Sony A7C in the camera cage.
- Insert the 1/4”-20 screw into the screw hole and tighten the screw.
INSTALLING TOP HANDLE
Quick Release Top Handle (OPTIONAL)
- Slide the top handle into the cold shoe mount on top of the cage.
- Tighten the tie-down screw.
The built-in 15mm rod holder supports the EVF bracket mount and other accessories.
INSTALLING SIDE HANDLE & SIDE HANDLE ATTACHMENT
To install the side handle attachment, align the M3 screw holes on the focus handle with the left side handle attachment. Tighten the screws.
- Press the release button to rotate the handle 360°.
- The focus handle has USB-C 8v and DC 12v outputs. Please check and connect your equipment accordingly. Tilta is not responsible for any user errors.
- Align the focus handle with the 1/4”-20 screw hole on the side of the cage.
- Align the locating points and tighten the tie-down screw.
INSTALLING WOODEN HANDLE & COLD SHOE MOUNT
- Align the wooden handle with the 1/4”-20 screw hole on the side of the cage.
- Align the locating points and tighten the tie-down screw.
- Align the cold shoe mount with the 1/4”-20 screw hole on top of the wooden handle.
- Tighten the screw.
INSTALLING QUICK-RELEASE PLATE & BASEPLATE
- Align the 1/4”-20 screw holes on the bottom of the cage with the bottom plate.
- A7C Manfrotto Bottom Plate
- Tighten the tie-down screws.
- Slide the bottom plate onto the baseplate until the safety lock bounces up, then tighten the locking toggle.
- All copyrights belong to Tilta Technology Co. Ltd.
- Written permission is needed for any reproductions.
- Tilta has the right to adjust product specifications without notice.
- All measurements are for reference only. Please see the actual products for more details.
- are registered trademarks owned by Tilta Technology Co., Ltd?
Website: www.tilta.com
US Address: 2801 W Magnolia Blvd, Burbank, CA 91505
US Contact Number: +1(818)651-4991
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>