SIMJAR DBH-01 Wireless Headphones User Manual
- June 9, 2024
- SIMJAR
Table of Contents
Wireless Headphones
Model: DBH-01
User Manual
What’s in the box
1 x SIMJAR Wireless Dinosaur Headphone
1 x Charging Cable
1 x 3.5mm Audio Cable
1 x User Manual
Overview
1) Illustration
2) LED Indicator Instruction
| Headphones Status | LED Indicator |
|---|---|
| Power on | Blue indicator flashes 4 times |
| Power off | Red indicator glows for 1 s and goes off |
| Pairing | The indicator flashes red and blue alternately |
| Connected | Blue indicator flashes once every 7 seconds |
| Low Battery | Red indicator flashes twice every 2 seconds |
| In charging process | Red indicator lights up sturdily |
| Fully Charged | The LED indicator light will turn blue |
Connection
-
Turn On The Headphones
Note: The headphones will automatically enter pairing mode when being switched on for the first time. -
Connect to Device
Music Control
Phone Call
Specifications
- Premium 40mm Dynamic Driver
- Frequency Respense: 20Hz – 20KHz
- Transmitter frequency range:2.402-2.480GHz
- Transmitter modulation: GFSK / 4DQPSK / 8DPSK
- Battery type: Lithium-ion Polymer(3.7V,500 mAh)
- Lithium Battery Energy Content: 1.85 Wh
- Battery charge time <2hrs
- Music play time 22hrs
- Weight: 0.15kg
- Maximum transmission powers8dBm
- Support: A2DP V1.2 / AVRCP V1.5 / HFP V1.5 / HSP V1.2 / Wired Connection
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
The term “IC: “ before the certification/registration number only signifies
that the Industry Canada technical specifications were met. This product meets
the applicable Industry Canada technical specifications.
Made In China
Documents / Resources
|
SIMJAR DBH-01 Wireless
Headphones
[pdf] User Manual
DBH-01, 2BAJWDBH-01, 2BAJWDBH01, dbh 01, DBH-01 Wireless Headphones, DBH-01,
Headphones, DBH-01 Headphones, Wireless Headphones
---|---