amazon Fire TV Omni Online QSG UK User Manual
- June 9, 2024
- Amazon
Table of Contents
What’s in the box
STOP: Before using your new product. please read these instructions and keep them for reference. Do not plug your poser cord into the wail until all other dewces ha•,* been connected
Setting up your Fire TV Omni
**WARNING: Do not Install while the TV set Is turned on Phs may result
inpersonal ripry from electric shock.
Toots you’ll need**
Getting your TV out of the box
This requires tow people.
Remove legs. remote. documents and any other accessories from the
upper styrofoam tray before removing the Tv from the box. Remove the TV.
keeping It in its plastic bag. frcen the carton and place it face down on a
Logo flat surface like a table or counters:1P. Serve disposing of the
packaging. make sure you’ve removed all parts and accessones
Base Installation
WARNING: Never places TV in an unmade location The TV may slide or fall
and Is’ cause serious injury to a chid or adult and Seriousdamage to the TV.
This ‘cooked two people. With the TV resting on a flat surface. attach the
croutaa Ngged support lame to the TV using the included screws. The legs are
nterchangeable and can be installed on either side.
Note illustrations below are provided for reference onlyand may differ
from the actual Product appearance.
Wall mounting
**WARNING: If* you ;morn ths TV on a van. fellow the Instructions Maly
26 Set out rn the instructions provided with the wall mount (sold separately).
If it knot corrects’ mounted, the TV may slide or fall and Cause serous awry
to a child or ackAt and serious damage to the TV. This requires two people.
VESA moulting pattern: (Oland 501 TVs: 200 mm x 200 mm (551 TVs 400 mm x 300
won Conrail screw (431 TVs Type M6.12 mm length (50′ and 55′) TVs: Type M6.
15 mm length
To entire safe InstaUrtkok follow these safety Precautions
- Check that the wall can support the weight of the TV set and wall meta assembly.
- Fdlow the mounting Instructions provided wall the wall mount.
- The TV set must be installed on a vertical wall.
- Only use screws that are suitable for the walls material.
- Ensure no one can trip over the TV cables.
Note Illustrationsbelow are provided for reference only and may Of* from actual product appearance.
Getting to know your Fire TV Omni
- Power button Press once to turn the TV on while in standby mode.
- Microphone on/off switch Controls the microphones. When the switch is off, you’ll see a red light.
- LED Indicator The colour indicates what your Fire TV is doing.
- Microphones The built-in microphones let you control your TV and content with your voice and Alexa.
- Optical audio output (S/PDIF) Connect an optical cable (sold separately) from the TV to the optical input on your receiver or soundbar.
- Ethernet/LAN Ethernet (10/100 Mbps) to connect to your internet modem or home network.
- USG Can be used to connect a USB cable.
- Satellite Input Used to connect to a satellite dish.
- Antenna/Cable Can be wed to connect a coaxial cable or antenna.
- HDMI ports The 4 HDMI (High-Definition Multimedia Interface) ports can be used to connect devices Eke gaming consoles or cable and satellite boxes. The HDMI (eARC) port has the additional ability to use the audio return channel to send digital audio to a receiver or soundbar.
- Mini AV port Can be used to connect AV devices.
- IR emitter port Connect an IR emitter cable to control other devices by IR commands from your TV.
- Common Interface slot Allows access to subscription TV services.
- AC-in (Input) Use to connect the supplied power cord to your TV.
Alexa is designed to protect your privacy
Wake word and indicators
Alexa doesn’t begin listening until your TV detects the wake word (for
example, ‘Alen,. A blue light lets you know when audio is being sent to
Amazon’s Secure cloud.
Microphone controls
You can electronically disconnect the microphones by sliding a switch.
Voice History
Want to know exactly what Alen heard? You can view and delete your voice
recordings in the Alexa app at any time.
These are just a few of the ways that you have transparency and control over
your Alexa experience. Explore more at amazon.co.uk/alexaprivacy.
General operation
Power on your TV
Follow the instructions on this page for switching on your TV and the
remote control before going on to the following pages and the channel setup
procedure.
- Connect the power cord FIRST to the television (AC-in port), THEN to a socket. Note: If the power cord Is damaged, do not plug It Into a socket under any circumstances, as there iS a risk of electric shock.
- (Optional) Connect an outside aerial to the antenna-in port on the back of the TV. This is required to receive broadcast television.
- Press the power button located at the bottom centre of the screen.
- You can also use the included remote to power on your TV.
Turn off the TV
To put your TV Into standby mode, press and hold the power button on your
remote until you see the screen turn off. To completely power off the TV.
unplug the cord from the socket.
Remote pairing
Inuit two AAA bat toes ult0 the remote control.
Your Fire TV Alexa voice Remote should automatically be paired
with your new Fire TV. If there are issues. you will be prompted to pair your
remote by pressing the Home button. If you continue to have issues, please try
reinserting or replacing the batteries and repeating this step. For more
troubleshooting and information- go to
amazon.com/devicesupport.
Complete the on-screen setup
Using your Fire TV Alexa Voice Remote, follow the on-screen instructions to
choose your language, select your WI-FI network and register your device.
Network connection
Your TV is intemet-ready. it can be connected to your home network in two
ways:
-
Wired, using the Ethernet connector on the back of the TV.
-
Wireless, using your wireless network. Connecting to a wireless network
1. Ensure you have: -
A router broadcasting a high-speed wireless signal.
-
Your Wi-Fi password if your network is password protected.
2. Select your Wi-Fi network from the networks displayed on the screen.
3. if prompted, add your Wi-Fi password through your remote during the on- screen setup.
Connecting to a wired network
- Ensure you have: • An Ethernet cable (not included) long enough to reach your TV. A router or modem with an available Ethernet port.
- Connect one end of the Ethernet cable to the Ethernet port on your Fire TV and the other end to any available Ethernet port on your modem or router.
- Your Fire TV will automatically configure your Ethernet settings. Follow the on-screen instructions to complete your setup. Tips and troubleshooting
Wireless network
- Using the included remote control, go to Settings a Network from the Main Menu, then select your network from the list displayed. If your network is hidden, enter your network name.
- If you see a lock icon, your Wi-Fi network requires a password. This password is not your Amazon account password.
- For best performance, use the 5GHz band on your wireless router if available. Do not place your router in a cabinet as it may impact Wi-Fi signal strength.
Wired network
if you’re hayury tiouble with your Ethernet connection, verify that the
Ethernet cable is properly connected and then restart your TV.
General tips and troubleshooting
No picture, no sound
- Check to see that your power cord is securely plugged Into the socket.
- Make sure you have selected the correct input source.
- Plug another electrical device into the power socket to make sure the socket is working.
Normal picture, no sound
- Make sure the TV is not muted. Press the Vol+ button to Increase volume.
- Check to see if your TV speaker is turned off. Go to Settings and select Display & Sound.
- If you have connected external sound equipment, ensure it is powered on and that you have selected the correct input source.
For more troubleshooting and information, go to arnazon.com/devicesupport. To learn more about your Fire Tv Omni and its advanced features, scan the QR code below or visit: www.arnazon.co.uk/help/firetvsmarttv
https://www.amazon.co.uk/help/firetvsmarttv
Something’s always on
You’ll never run out of things to watch on Fire TV. Easily download your
favourite apps like Net Rix. Prime Video. YouTube and Disney+. Access
thousands of hours of free films and TV episodes from popular ad-supported
streaming apps like Freevee and Pluto TV. Watch or browse live TV, sport and
channels from live on the Main Menu. With Profiles, everyone in your household
can quickly get recommendations tailored to what they like.
Hands-free Alexa
Use your voice to find, launch and control your entertainment. Alexa can also
help start a music playlist, dim the lights, show the weather and view the
front door camera. ‘Alexa, turn off the TV!
Alex.% find films! ‘Alexa, turn up the volume! ‘Alexa, play top music hits! ‘Alexa, rewind 30 seconds! ‘Alex& what’s the weather?’
Alex.% set a timer for 5 minutes? To learn more about what Alexa can do, just ask, ‘Alexa. what can you do?” Certain services and features ore subject to change or withdrawal at any time, may not be available in oil languages, areas or 4K and may require seporote subscriptions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>