SENTRY INDUSTRIES SPBT9 Bluetooth Speaker User Manual
- June 9, 2024
- Sentry Industries
Table of Contents
SENTRY INDUSTRIES SPBT9 Bluetooth Speaker
Product Information
The SPBT9 is a Sentry Bluetooth speaker with a 50mm speaker. It has a charging port (7) covered to be kept away from water, and it should not be submerged in water. The speaker also has a USB port (5) for inserting a USB card disk and a Micro SD port (6) for inserting a Micro SD card. The speaker has an On/Off button (7) for switching it on or off and a Micro USB port (8) for charging the speaker. The playback and charge times mentioned in the manual are approximate, and they may vary due to factors such as battery conditions, ambient temperature, listening volume, and distance from the source audio device.
Product Usage Instructions
- To connect the speaker to your phone, switch on Bluetooth on your phone and SPBT9.
- Press button 1 to choose the mode.
- To increase the volume or play the next song, press button 3.
- To decrease the volume or play the previous song, press button 2.
- When you receive a call, press button 4 to answer it. Press it again to hang up.
- To insert a TF card, insert it into port 6. To insert a USB card disk, insert it into port 5. Only MP3 files can be played, and memory cards cannot exceed 32GB.
- To charge the speaker, connect it to the charging slot (8). The LED indicator will light up red when it’s charging, and it will go off when charging is finished.
It’s important to note that you should not charge the speaker near water and that changes or modifications to the unit not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Mode
- -: volume down / last song
- +: volume up / next song
-
- USB: Insert USB hard disk.
- TF (Micro SD): Insert TF (Micro SD) card.
- On/Off button
- Micro USB: Charge the Speaker
note: Playback and charge times mentioned are approximate and based on earbuds and case being fully charged, and playback at 50% volume. Playback and charge times may vary and performance may be affected by multiple factors including but not limited to battery conditions, ambient temperature, listening volume. and/or distance from the source audio device.
Basic Function
Pow&r on I off To turn on the speaker. switch button 7
Bluetooth Pairing I Connection
Turn on the speaker and press M to select Bluetooth mode. Enable Bluetooth
function on your device and search the Blutooth device named SPBT9. Click to
connect (pair). After successful connection, you can play music or use the
Bluetooth phone functions.
TWS: True wireless To pair this speaker with other SPBT9 speakers. Turn
off Bluetooth on your phone or music devices. Turn on two SPBT9 speakers
together at the same time, press M together for 3 seconds and a prompt says
bluetooth connected. After two speakers connected, switch on the bluetooth on
your phone and SPBT9.
Music Play
- Press button 1 to choose mode.
- Next song / volume up : Press button 3
- Previous song / volume reduction: Press button 2.
Hands Free
- Press button 4 to answer when the call incoming, press it again to hang up.
TF Card and USB Card
Insert the TF card to port 6. Insert USB to port 5. Select the mode by
pressing button 1. (see mode selection) Only MP3 files can be played. Memory
cards cannot exceed 32GB
Charging instructions
Please use the provided cable(USB to micro USB cable) to charge the speaker by connecting it to a computer, power bank or USB charger to the chargling slot 8. It is charging if the LED indicator light up red, and the LED indicator goes off upon charging finished.
Specifications
- Speaker :50mm
- Ran1;1e: Al)rox. 30ft
- Ballery Type: Lilhium Ion
- RechargeaDle: Yes
- Bluetooth®: Yes
Important Safety Instructions
- Do not charge near water Near Water ; Keep Charging port 7 covered. Do not submerge into water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Use in accordance with the manufacturer’s instructions.
- Do not charge near any heal sources such as radiators, heat registers, stoves, or other apparatus {including amplifiers) that produce heat. Discol’llinue use if damaged
- Protect the cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the device
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallert into the apparatus, the apparatus hc1s beert exposed to rain or moist\Jre, does not operate normally, or has been dropped.
Sentry warrants this product to be free from defects in materials and workmanship for 90-days from the date of original purchase. This warranty does not pertain to damage res1.Jlting from accident, abnormal IJS8, misuse or neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or to Sentry directly at: P.O. Box 885, One Bridge St. Hillburn, NY 10931. Please enclose a check for $5.00 for shipping & handling.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
“NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”
This device complies with part 15ofthe FCC rules. Operation is subject to the following two conditions:
- This device may not cause hannful interference. and
- this device m\Jst accept any interference received, incltlding interference that may cause undesired operation.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and may use of such marks by Sentry Industires Inc is under license. Other trademarks and trade names are those of their respective owners inc declares that radio equipment is in compliance with Directive 2014153/EU.The EU dedaration of confirmity is available at https://sentryindustries.comleuropea11-declaration-of-oonformity/
Supplier’s Declaration of Conformity (47 CFR Part 15.21, 15.105(b)
Compliance Information )
FCC ID: 2ACP4-SPBT9
Sentry Bluetooth speaker
MoOel # SPBT9
Responsible Party –
Sentry Industries inc
One Bridge street, Hillburn, NY 10931
Tel +1 845 753 2910