PROSCAN PEDVD1332 13.3 Inch Swivel Screen Portable DVD Player User Manual
- June 9, 2024
- ProScan
Table of Contents
PROSCAN PEDVD1332 13.3 Inch Swivel Screen Portable DVD Player
IMPORTANT SAFETY INSTRUCTIONS
When using electronic equipment, basic safety precautions should be followed,
including the following:
WARNING: To reduce the risk of electric shock, fire or injury to persons:
- Read all instructions before using the unit.
- Use this unit only for its intended use as described in this manual.
- Do not operate this unit if it has a damaged cord or plug, is not working properly or has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- WARNING: Do not allow children to use the unit without supervision.
- WARNING: Liquids and foodstuffs must not be spilled or dropped into the unit.
- WARNING: It is hazardous for anyone other than a trained person to carry out any service or repair operation.
- This unit is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the unit.
- Never leave the product unsupervised. Switch off the product when it is not in use, even if this is only for a short while.
- The unit must be free-standing. It must not be placed in a cabinet.
- The temperature of accessible surfaces may increase when the unit is operating.
- This unit is not intended to be operated by means of an external timer or separate remote control.
- If smoke is emitted, switch off and unplug the unit immediately.
- Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a slightly dampened cloth for cleaning and immediately wipe dry.
- Attachments: Use only attachments recommended by the manufacturer. Use of other attachments may be hazardous.
- Water and Moisture: Do not use this product near water (e.g., near a bath tub, washbowl, kitchen sink, laundry tub, in wet basements, or near a swimming pool and the like).
- Ventilation: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
- This unit must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
- Replacement Parts: When replacement parts are required, be sure that your service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
- Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to ensure that the product is in proper operating condition.
- Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this may cause a fire or an electric shock.
- When the AC/DC adapter is used as the disconnect device, the disconnect device must remain readily operable. To completely disconnect the power input, the AC/DC adapter must be completely disconnected from the mains.
Please read through this manual before making connections and operating your
unit.
Please retain this manual for future reference.
This unit is small, lightweight and utilises the latest state of the art
electronics. It is easy to
install, conveniently portable and may be used at home, in the office or on
holiday.
Features
- High-definition TFT LED screen
- Headphone jack
- USB/MMC/SD card slot
- Compatible with DVD,VCD,MPEG4,CD,Mp3,CD-R,DVD-RW,JPEG,etc.
- Supports playback control : play, pause, fast forward playback, fast rewind playback ,etc
- Two optional aspect ratios 16:9 and 4:3
- Working voltage: DC 12V
PRECAUTIONS AND WARNINGS
Placement:
- To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
- Do not expose this appliance to direct sunlight.
- Keep this appliance away from strong magnets, heat sources and excessive dust.
- Do not place this appliance on an unstable surface.
- If the unit is brought directly from a cold place to a warm one, moisture may condense inside the unit and cause a malfunction. If this occurs leave the unit turned on for a few hours until the moisture evaporates.
Installation:
Ensure that the portable DVD player is installed according to the instructions and illustrations provided in this manual.
Caution:
- Do not drop any objects into the unit through the openings.
- Do not spill or spray liquid of any kind on or in the unit (this may result in a fire or electric shock).
- Do not place anything heavy on the unit.
- To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other materials.
- Keep the unit away from open flames such as fire, candles etc.
- Install the batteries correctly as incorrect replacement is hazardous.
- Dispose of batteries in accordance with local regulations.
- The maximum working temperature is 95 degrees Fahrenheit or 35 degrees Celsius.
No Disassembling:
Never attempt to disassemble the unit as this is very dangerous and may cause
an electric shock and/or harm from exposure to the laser beam.
Please refer all servicing and maintenance to an authorised service centre.
Cleaning unit:
- When cleaning ,please make sure the unit is unplugged from the power source.
- Do not use chemicals or detergents when cleaning.
- Use a soft cloth lightly dampened with water to clean the exterior of the unit only and immediately wipe dry.
Disc handling:
-
Do not leave discs near heat sources, in direct sunlight, or in high humidity.
-
Store discs in their cases when they are not being used. Stacking discs or standing them at an angle without putting them in the case can cause the disc to warp.
-
Do not touch the disc surface when handling a disc; hold it by the edges.
-
Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce sound quality.
Always handle carefully and make sure discs are clean before use. -
Do not stick paper or tape onto the disc.
-
Do not write on the disc with a marker etc. Clean discs using a soft cloth, lightly wiping from the centre outwards.
-
Do not use solvents such as benzene, commercially available cleaners not intended for CDs or anti-static spray intended for vinyl LPs, as these may damage your disc.
NOTE:
- Do not use or leave the device in direct sunlight or a hot environment such as a vehicle etc. that is in hot environment. Overheating can damage the device
- Do not overcharge the device-do not leave the device on the charger for very long after the battery has been fully charged
- Device should be protected from any physical impact or damage and care should be taken not to drop the device
- Only use the factory supplied charger. The use of unapproved charger or cable may cause the battery to fail, explode and/or damage the device.
- Do not disassemble, puncture, crush or expose your device to temperatures above 40 °C/ 104 °F
- Keep your device away from fire or water.
- Keep your device from moisture and extreme temperatures.
- Should your battery swell or expand, please immediately discontinue use of your device.
- A probable cause is it having been overheated at some point or overcharged. Please contact us for support.
PACKAGE CONTENTS
- AC ADAPTOR
- REMOTE CONTROL
- EARPHONE
- CAR ADAPTOR
- INSTRUCTION MANUAL
FRONT/REAR PANEL
- TFT ON/OFF
- MODE
- PREV
- MENU
- VOL –
- NEXT
- AUDIO
- MUTE
- VOL+
- OPEN
- REW
- PLAY/PAUSE
- STOP
- DOWN
- FWD
- OK
- UP
- USB SD
- SETUP
- DC IN
- OFF/ON
- AV IN
- AV OUT
- PHONE
- CARD
- USB
REMOTE CONTROL
- MUTE
- POWER
- 0-9, l0+NUMBERS
- VOL +
- VOL –
- MENU
- SLOW
- EXITSTOP
- REPEAT
- A-B
- PBC
- ZOOM
- MODE
- SD/USB
- TITLE
- SUBTITLE
- AUDIO
- RETURN
- GOTO
- UP ▲
- LEFT ◄
- RIGHT ►
- PLAY ENTER
- PAUSE
- DOWN ▼
- FWD
- REV
- NEXT
- PREY
- INFO/SETUP
- LCD MENU
- PROG SEARCH
- ANGLE
- OSD
PANEL KEYS
Common key functions on the panel:
Menu
Press to return to the root menu for DVD.
Stop
Press to suspend current broadcast.
Play/Pause
Press once to pause play, press again to resume.
Setup
Press to enter the setup menu,then use the direction keys and OK to set the
system menu.
USB/SD
Press repeatedly to switch input source: Disc/ SD card/USB mode
Direction Keys
Use direction keys for: Previous/Next/Fast forward/ Fast rewind
OK
Press to enter the selected item or choice.
Open
Press to open the door.
Battery Installation and replacement
- Unscrew battery cover and remove.
- Properly dispose of exhausted batteries.
- Insert 2 new AAA batteries (not included).
- Be sure the positive(+) and negative(-) ends of the batteries are facing the correct direction.
- Replace the battery cover.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
KEY FUNCTIONS
Note: Some of the following buttons are only on the remote, some are only on the unit and some are on both the unit and the remote.
| Switch on/ off the unit
---|---
| Press repeatedly to switch between Disc, SD card, USB source input.
| Press to enter/exit the setup menu .
| The digit keys can be used to input numbers or to select a track or chapter
number .
| Press to enter an item in the menu or to confirm and execute a selection.
| The direction keys can be used to move the highlight in the menu.
| Press button to switch to DVD or AV INPUT.
| Press to switch repeat modes. (Note: This function is invalid when the PBC
function is activated.)
| Use to repeat specific sections of a disc. Press this button to mark the
starting point(A} and press it again to mark the ending point(B) and the unit
will play the selected section over and over again. Press a third time to
cancel A-B repeat and resume normal playback. {Note: Points A and B must be in
the same title/track).
| Skip to the previous chapter/track.
| Skip to the next chapter/track.
| Press to start a playback or resume normal playback from fast forward, fast
reverse,
slow-motion, frame-by-frame playback, etc.
| Press to temporarily pause a playback; press again or press to resume the
playback.
| Press once to pause a playback, then press to continue the playback. Press
twice to stop a playback and the disc will reset to the starting point.
| Fast forward playback. Available speeds: 2x, 4x, Bx, 16x, 32x and normal
speed.
| Fast reverse playback. Available speeds: 2x, 4x, Sx, 16x, 32x and normal
speed.
| Press to enter the TIME menu. Use the digit keys to select a title, chapter,
track, track time or disc time to play. Press again to exit the TIME menu.
| Press this button to temporarily switch off the sound. Press it again to
switch it on.
| Press VOLUME+ to turn up the volume. Press VOLUME- to turn down the volume.
| Press repeatedly to select the available audio languages provided by the
disc (for DVD).
Press repeatedly to switch the available audio channels provided by the disc
(forVCD)
| Press to return to the main menu when playing DVD.
| Press repeatedly to switch/show the subtitles or turn off the subtitle
function. (Note: this function only works if the disc is encoded with
subtitles.)
| Press repeatedly to switch or hide the relative information of the playing
disc.
| Press this button to zoom in the scene. The available zoom ratios are: 2x,
3x and 4x. In zoomed-in mode, the direction keys can be used to move the
zooming centre {Note: Applies to DVD,VCD,MPEG4,etc).
| Press “REV” to search backward, “FWD” to search forward.
GENERAL SETUP
CHARGING THE UNIT
This player is powered by a lithium-polymer battery. It features a high ratio
of energy to weight. It has no memory effect and it can be recharged at any
time regardless of whether it is fully or partially discharged. It takes about
six hours to fully charge the battery and a fully charged battery can be used
for up to two hours.
Connect the attached AC/DC adaptor to the DC INPUT jack on the unit, then plug
the adaptor into a 100-240V AC outlet.
Note: Make sure to switch off the unit before charging. The charging indicator
LED will change from RED to GREEN to indicate that the battery has been fully
charged.
Usage and Maintenance of the rechargeable battery.
- The working temperature of the rechargeable battery ranges from 0 0c to 45 °c
- Always unplug the unit when it is not being used unless it is being charged.
- Heat is inevitably produced during playback, this is normal. However switch off and allow it to cool down.
- Avoid banging the battery and keep it away from heat and moisture.
CONNECTING TO THE TV
This unit can be connected to a TV in order to enjoy high quality music, movies etc with a TV. Use an AV cable to connect the AV OUT jack on the unit to the AV IN jack of a TV. DVD player has sound and video input jacks for connecting external audio and video inputs.
Menu Operation
- Press [SETUP] on the remote control or on the unit to show the setup menu.
- Press [LEFT]/ [RIGHT] to select an item. The submenu of the selected item will be instantly shown.
- Press [UPI/ [DOWN] to select an item in the submenu, then press [O1(]/[ENTER]/[RIGHT] to enter. Use [UPI /[DOWN] to select an option, then press [OK]/[ENTERI to confirm or press [LEFT] to cancel.
- Press [UP]/[DOWN] to continue to set other items in the submenu.
- Press [LEFT] to go back to the superior menu of the current one.
- Press [SETUP] again and press [ENTER]/[OK] to exit the setup menu.
1. GENERAL SETUP PAGE
There are four items in the GENERAL SETUP PAGE. They are TV DISPLAY, OSD
LANGUAGE, LAST MEMORY, Text To Speech .
1.1 TV DISPLAY
Adjust screen aspect ratio to Normal/PS, Normal/LB or Wide.
1. 2 OSD(on-screen display)language
Set the on-screen display language in this item.
1.3 LAST MEMORY
ON: Each time you turn off the unit or stop the disc, it will memorize the
last play time. Next time you turn on the unit and play the same disc, the
unit will play from that memorized point.
OFF: Disable the last memory function.
1.4 TEXT TO SPEECH
ON: set th is on, it w ill speech w hen you press any buttons.
OFF: Disable the text to speech function.
2. VIDEO SETUP PAGE
This menu is used to set up the picture quality of the unit.
3.1 QUALITY
Adjust items according to your personal preference.
3.1.1 SHARPNESS
There are three options (HIGH, MEDIUM and LOW) for you to choose in this item.
3. 1 .2 BRIGHTNESS AND CDNJRASf
Enter an item and use the direction keys [LEFT] /[RIGHT] to adjust the value,
then press [ENTER] to confirm.
SYSTEM SETUP
4. PREFERENCE SETUP
If there is no disc in the disc tray, the disc tray is open or the disc in the
disc tray is stopped, this item is available.
4.1 TV TYPE
Press to change TV TYPE (NTSC/AUTO/PAL)
4.2 AUDIO, SUBTITLE and DISC MENU
Select a preferred audio language, subtitle language and disc menu language in
these items.
You can also change the audio language by pressing [AUDIO] and the subtitle
language by pressing [SUBTITLE] on the remote control.
NOTE: If the selected languages in these items are not available for the
currently playing disc, the disc will be played in the default settings.
4.3 PARENTAL
This item allows the user to set a maximum rating for the movies that can be
viewed. Movies rated higher than the level set for the parental lock cannot be
viewed without inputting the correct password.
To reset the level, the correct password must be entered. The default password
is 0000.
NOTE: This function only works for discs that have parental control
function.
4.4 DEFAULT
Press to restore the default settings except the settings in the PASSWORD
setup page and the PARENTAL item.
5. PASSWORD SETUP PAGE
5.1 PASSWORD MODE
Switch password function ON/OFF.
NOTE: Key in the correct password and press [ENTER] before you change the
option in this item.
The default password is 0000.
5.2 PASSWORD
Reset the password.
The default password is (0000) to change the parental level.
PLAYBACK
After all the connections are correctly made, switch on the unit.
Loading and Playing a Disc
A. After connecting power to the unit ,set the power switch to the ON
position.
B. Push[ OPEN] to open the disc tray. Place a disc in it with the label side
facing up.
C. Close the disc tray. The unit will load the disc and start playing.
MP3/MPEG4 Disc Playback
After the unit loads a MP3/MPEG4 disc, a menu showing the contents of the disc will display on the screen.
1. Press the direction key [UP]/[DOWN] to select a file or a folder.
2.1 Press [OK] to enter the selected folder. The file or the folder in it will
be listed instantly.
2.2 Press [OK] to begin to play the selected file.
3. When the disc is stopped press [LEFT] to return to the superior menu.
U DRIVE&SD/MMC CARD PLAYBACK
Insert a U drive or a card reader into the USB port. Press [USB/SD from the remote or DVD/ USB/SD from the DVD] to select USB mode to play the readable files in it. insert a SD/MMC card into the SD/MMC card port. Press [USB/SD from the remote or DVD/USB/SD from the DVD] to select MCR mode to play the readable files in it.
SPECIFICATIONS
Compatible discs | DVD/CD/MP3/MPEG4 |
---|---|
Frequency response | 20HZ to 20KHZ |
Video output | 1 Vp-p75 Ohm unbalanced |
Audio output | 1.4VRms/10KOhm |
Dynamic range | Better than SSdB |
Laser | Semi-conductor laser, Wavelength: 650 |
Power source | DC12V |
Operating temperature | 5-40 |
Battery type | Li-polymer |
TROUBLESHOOTING
Before resorting to maintenance service, please check the following chart.
Symptom | Solution |
---|---|
No sound or distorted sound | Make sure your DVD is connected properly and all |
cables are securely inserted into the appropriate jack.
Cannot advance through a movie| You can not advance through the opening
credits and warning information that appears at the beginning of movies
because the disc is programmed to prohibit that action.
The icon i, appears on screen| The feature or action cannot be completed at
this time because:
- The disc software restricts it
- The disc software does not support the feature
- The feature is not available at the moment
Picture is distorted| The disc might be damaged. Try another disc.
It is normal for some distortion to appear during forward or reverse scan.
No forward or reverse scan| Some disc have a section that prohibits rapid
scanning or title and chapter skip. The movie is often programmed to prohibit
skipping through the warning information and the credits at the beginning of a
movie.
The player breaks down when a U drive or memory card is inserted into the
player| The connected U drive or the memory card is probably not an original
version. The player cannot play a U drive or memory card of a non-original
version.
If the player breaks down, turn it off and unplug it from the power supply.
Reconnect it to the power supply and switch it on again. The player will
resume normal status.
WARRANTY EXCLUSIONS
The warranty will not be valid if:
- The product has not been installed, operated or maintained in accordance with the manufacturers operating instructions provided with the product.
- The product has been used for purposes other than its intended function.
- The product has been used for purposes other than household use.
- The damage or malfunction of the product is caused by any of following conditions:
- Incorrect voltage
- Accidents (including liquid or moisture damage)
- Misuse or abuse of the product
- Faulty or improper installation
- Mains supply problems including power spikes or lightning damage
- Infestation by insects
- Tampering or modification of the product by persons other than authorised service personnel
- Exposure to abnormally corrosive materials
- Insertion of foreign objects into the unit
- Used with accessories not pre-approved
Please refer to and heed all warnings and precautions in the User Manual.
Made in China
For service assistance and product information, please call:
1-800-968-9853.
Pour obtenir assistance et information appelez:
1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15,
MISSISSAUGA, ON, L5S 2A3 www.curtisint.com
To make a warranty claim, please email support2@curtiscs.com or call 1-800-968-9853.
90 day Warranty
This product is warranted to be free from defects in material and workmanship
for a period of ninety (90) days from the date of original purchase. During
this period, your exclusive remedy is repair or replacement of this product or
component found to be defective, at our option; however, you are responsible
for all costs associated with returning the product to us. If the product or
component is no longer available, we will replace with a similar one of equal
or greater value. Prior to a replacement being sent, the product must be
rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.
ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS REQUIRED TO OBTAIN
WARRANTY SERVICE.
Please have the following information available when you contact the Support
Team:
- Name, address and telephone number.
- Model number and serial number.
- A clear, detailed description of the problem.
- Proof of purchase including dealer or retailer name, address and date of purchase.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>