SENSITECH TempTale Ultra BLE Conventional Temperature Monitor User Guide
- June 9, 2024
- SENSITECH
Table of Contents
Getting Started Guide
TempTale Ultra BLE Conventional Temperature Monitor
For a full-size printout of this Guide, go here:
https://www.sensitech.com/en/support/user-manuals/
Min. System Requirements iPhone 7 or higher running iOS 11+ Android 7.1+
Samsung Galaxy 8+
Tech Support
[email protected] or EMEA:
+31 (0)252 211 108 or Hong Kong: +852-2880-0389
- On the smartphone, from the Apple Store or Google Play store, download and install the TempTale® App 3.1 (see figure 5).
- Open the TempTale® App; allow the app access to the smartphone Bluetooth (tap OK).
Once the TempTale® App opens, the app automatically connects to Temp Tale® Ultra BLE monitors within range and displays a list of monitor cards on the Nearby BLE Monitors tab (figure 1). View monitor data by downloading data to the Temp Tale® App.
Export and Share the TempTale® Ultra BLE Monitor Data using the TempTale® App
To export Monitor Data, from the Monitor Details view:
Manually Start the Monitor Recording
Restart/Reset the Monitor from the TempTale® App (multi- use configured monitors only)
- If the monitor is running, tap the white area of the monitor card; from Monitor Download Options, select Stop Monitor and Reset.
- If the monitor is stopped, tap the blue area of the monitor card, and tap Actions>Reset.
Manually Stop the Monitor Recording
Push and hold Red Stop Button until the Stop Sign icon displays. 
Manually Reset the Monitor (multi-use configured monitors only)
-
Press and hold Red Stop Button on the monitor (8 seconds) until the blinking CF (figure 8) displays on the LCD, followed by SEt (figure 9).
-
Release the Stop button; the blank LCD indicates that the monitor is reset with the same configuration and ready for use.
Bluetooth® is a registered trademark of Bluetooth SIG.
© 2023 Carrier. All Rights Reserved.
800 Cummings Center
Suite 258X
Beverly, MA 01915-6197
+1-800-843-8367
+1-978-927-7033
Fax +1-978-921-2112