proxidize MX2 4G LTE USB Modem User Manual

proxidize MX2 4G LTE USB Modem User Manual

Dear users, thank you for purchasing our products, in order to further understand the products, please read this manual carefully before use, wish you a pleasant experience!

Description of device interface and status indicator light

need to be purchased separately
4| Network Status Indicator| Red on| Sign up to 4G network
---|---|---|---
White on| No SIM is recognized not sign up to network
5| WIN Status Indicator| always on| starts properly
Off| Abnormal working

WIFI SSID: 4G-UFI-XXXX
WIFI Password: 1234567890
Gateway IP: 192.168.1.1
Remarks: This device supports both Dongle and Router functions simultaneously. You need to install the software in the disc under Dongle mode only and as a router it just requires USB 5V power supply.

Router mode
Routing mode requires 5V power supply only, it can be power by power bank USB interface, car USB interface, computer USB interface and mobile phone adapter USB interface. Please make sure the power supply voltage is no more than 5.5V, or the device may be burned. Multiple devices could connect to internet through the shared wifi hotspot.

Dongle Mode
This Dongle works well with desktop/laptop through USB interface under all kinds of operating systems like Linux (ubuntu, debian, etc.), MAC, Windows XP/ Windows7/ Windows8/ Windows10 systems.

Prepare to Install Drive

1. Turn off the network before installing the driver and unplug the network cable of desktop/laptop.

2. Temporarily turn off the antivirus software during the installation

3. Plug the device into your computer’s USB port, the driver will be automatically installed and a -Web Connection’ icon will appear on the desktop.

4. The automatic installation may not work if the computer’s security level is very high. In this case you need to double click the installation file in CD.

5. Some os couldn’t support auto pop up the web page, go to “My Computer”, find the “Web Connection” cd, right-click pop-up.

6. Only if there is Remote NDIS in device manager(picture below) of the computer, you can use this dongle
   

Router Management

1. First conncet to mobile phone or pc.Web will go to WEB management page after entering 192.168.1.1 in IE bartyou can configure the “Set Language” and “use help.” .Click password: admin

2. Login and it will jump to the setting home page, This page completes the setting of device parameters, such as Win, APN, etc.
   

3. The main information state of the device, the connect state, the battery remaining power, the connected network time, the number of users. (picture below)

Common faults and treatment

1. If you couldn’t access to internet, enter 192.168.1.1 to the web management, check the mobile network status first
2. If it is ” connected” status but couldn’t access to Internet, you need to add the valid APN manually. You can consult with your local operator to get the right APN.
3. Dongle mode can not Internet, Verify that there is a remote NDIS network like picture 4.if not,please eject the cd of device in pc.

FCC Compliance Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
Before a new device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the device a minimum of 5mm from the body.
Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>