DELL S Series S2722DC USB-C QHD Monitor Quick Start Guide
- June 9, 2024
- Dell
Table of Contents
DELL S Series S2722DC USB-C QHD Monitor
What’s in the box?
Setting up the monitor
Setting up the stand
- NOTE: The stand is not factory-installed.
- NOTE: The following steps are specifically for setting up the stand that is shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the setup instructions that were included with the stand.
To set up the monitor stand:
-
Follow the instructions on the flaps of the packaging box to remove the stand from the cushion that secures it.
-
Remove the stand base and stand riser from the packaging cushion.
-
Align and place the stand riser on the stand base.
-
Open the screw handle at the bottom of the stand base and turn it clockwise to secure the stand assembly.
-
Close the screw handle.
-
Open the protective cover to access the VESA slot on the display.
NOTE: Before attaching the stand assembly to the display, ensure that the front plate flap is opened to allow space for assembly. -
Attach the stand assembly to the display.
- a. Align and slide the tabs on the stand riser into the VESA slot.
- b. Press the stand down until it snaps into place.
-
Hold the stand riser with both hands firmly and lift the monitor. Then place the monitor in an upright position on a flat surface.
NOTE: Hold the stand riser firmly when lifting the monitor to avoid any accidental damage. -
Lift the protective cover from the monitor.
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow the Safety instructions.
-
NOTE: Dell monitors are designed to work optimally with Dell-supplied inbox cables. Dell does not guarantee video quality and performance if non-Dell cables are used.
BRoute the cables through the cable-management slot before connecting them. -
NOTE: Do not connect all the cables to the computer at the same time.
-
NOTE: The images are for the purpose of illustration only. The appearance of the computer may vary.
To connect your monitor to the computer:
- Turn off your computer and disconnect the power cable.
- Connect the USB Type-C cable (shipped with your monitor) or the HDMI cable from your monitor to the computer. (See Bottom view for details.)
- Connect the USB 3.2 Gen 1 peripheral to the USB 3.2 Gen 1 downstream port on the monitor.
Connecting the USB Type-C and power cables
NOTE: Use the USB Type-C cable shipped with the monitor only.
- This port supports DisplayPort Alternate Mode (DP1.2 standard only).
- The USB Type-C power delivery compliant port (PD Version 3.0) delivers up to 65 W of power.
- If your notebook requires more than 65 W to operate and the battery is drained, it may not be powered up or charged with the USB PD port of this monitor.
Connecting the HDMI and power cables (optional) and then powering on the LCD
Using the tilt, swivel, and vertical extension
NOTE: The following instructions are applicable only for attaching the stand that was shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the setup instructions that were included with the stand.
With the stand attached to the monitor, you can adjust the monitor for the most comfortable viewing angle.
-
Tilt
NOTE: The stand is not installed at the factory when shipped. -
Vertical extension
NOTE: The stand extends vertically up to 110 mm. The figure below illustrates how to extend the stand vertically. -
Rotating the display
Before you rotate the display, ensure it is completely extended vertically and completely tilted up to avoid hitting the bottom edge of the monitor.
User Support
FAQ’s
What is the resolution of the DELL S Series S2722DC monitor?
The DELL S Series S2722DC monitor has a QHD (Quad HD) resolution, which is 2560×1440 pixels.
Does the DELL S Series S2722DC monitor come with a USB-C port?
Yes, the DELL S Series S2722DC monitor features a USB-C port that allows for video, audio, and data transmission, as well as charging your devices.
Can I charge my laptop or other devices using the USB-C port on the DELL S Series S2722DC monitor?
Yes, the USB-C port on the DELL S Series S2722DC monitor supports Power Delivery (PD) up to 65W, which means you can charge your laptop or other devices while they are connected to the monitor.
What are the other connectivity options available on the DELL S Series S2722DC monitor?
In addition to the USB-C port, the DELL S Series S2722DC monitor also includes HDMI 1.4, DisplayPort 1.2, and audio line-out ports for connecting to various devices such as PCs, laptops, gaming consoles, and more.
Does the DELL S Series S2722DC monitor to support a daisy chain with multiple monitors?
Yes, the DELL S Series S2722DC monitor supports DisplayPort MST (Multi-Stream Transport), which allows you to daisy chain multiple monitors together using a single DisplayPort cable from your computer’s graphics card, enabling you to extend your display across multiple monitors.
What is the refresh rate of the DELL S Series S2722DC monitor?
The DELL S Series S2722DC monitor has a standard refresh rate of 60Hz, which is suitable for most everyday computing tasks, including office work, browsing, and multimedia consumption.
Does the DELL S Series S2722DC monitor have built-in speakers?
Yes, the DELL S Series S2722DC monitor comes with two built-in 3W speakers, providing the basic audio capability for multimedia content.
Does the DELL S Series S2722DC monitor have ergonomic adjustments?
Yes, the DELL S Series S2722DC monitor features tilt and height adjustment capabilities, allowing you to adjust the tilt angle and height of the monitor for optimal viewing comfort.
Does the DELL S Series S2722DC monitor have any special features for eye comfort?
Yes, the DELL S Series S2722DC monitor includes a ComfortView feature that reduces harmful blue light emissions, and it’s also certified with TUV Low Blue Light and Flicker-Free standards, which helps reduce eye strain during extended viewing sessions.
Does the DELL S Series S2722DC monitor come with any warranty?
Yes, the DELL S Series S2722DC monitor comes with a standard 3-year Advanced Exchange Service warranty, which covers hardware defects and provides a replacement unit if necessary.
What is the resolution of the DELL S Series USB-C QHD Monitor?
The DELL S Series USB-C QHD Monitor has a Quad High Definition (QHD) resolution, which is 2560 x 1440 pixels.
What is the size of the DELL S Series USB-C QHD Monitor?
The DELL S Series USB-C QHD Monitor comes in various sizes, including 27 inches and 32 inches.
Download this PDF Link:DELL S Series S2722DC USB-C QHD Monitor Quick Start Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>