HUAWEI Outdoor CPE B2368 CAT12 LTE Router with Antenna User Guide
- June 9, 2024
- Huawei
Table of Contents
Outdoor CPE B2368 CAT12 LTE Router with Antenna
User Guide 
B2368- User Guide
Hardware Description
- One slot for one SIM card (3FF Micro-SIM is supported)
- One RJ-45 connector for connecting to the IDU PoE port
- LED indicator
ODU LED Indicators
| Color | LED Behavior | – Status Indication |
|---|---|---|
| OR | Power Of | |
| Rod | Steady ON | Errol-, tnalfunctson, or no SLR |
| Shaul; | Upgrading | |
| Grin | Blinking | Booting up |
| Steady ON | Strong LTE signal SIN’R a 10 dB | |
| Blue | Steady ON | Medium LTE signal 10 dB > SINR a 4 dB |
| Orange | Steady ON | Weak LTE signal SINR < 4 dB |
| Blinking | No LTE signal, sorbing, or disconnected |
IDU LED Indicators description (from left to right)
| LED | COLOR | STATUS | Descriptio n |
|---|---|---|---|
| PWR S YS **** | Green | On | The LTE Devxe a recen-mg power and ready to use |
| Shaft | The LTE Device a booting up. | ||
| Rrd | On |
The LTE Device detected so star sittle telltestmt or then a a device
toalfroctice or oo SIM card
Minions| The LTE Device as upgrading the fotoware
Off| The LTE Device a not remittal power
PHONE ****| Green| On| A SIP account is tepstered for the phone port
Blinking| A telephone connected to the phone port has its recerter off of the
hook or there is an =cam, call
Yellow| On| A SIP account is repstered for the phone port and there is a voice
message m the catiespoodakr SIP account
| | Blinking| A telephone connected to the phone port has in
rem% a off of the book and that is a voice menage in the cortesponding SIP
account
---|---|---|---
Off| The chase port does not have a SDP account registered
WRS/Wi-FI| Green| On| Either IEEE 802 llbcsa or SO: !lac is acuvated
Blmlang| The LTE Device is communicating with w ueless chain
Yellow| Blanking| The LIE Device is setting up a UPS cameos:xi
Of| The wireless network is not actuated
LET
Signal Strength| Green| On| Strong LIT signal SLNR > 10 dB
Blue| On| Malcom LTE signal 10 dB > SLNR > 4 dB
Orange| On| Vs’eak LTE signal SINK c 4 dB
Blmkmg| No LTE signal. searching. a disconnected
LAN
0.2| Yellow (Gin Ethernet )| On| The LTE Device has a successful 1000 Mbps
Ethernet connection with a device as the Local Area Network (LAN)
Blang| The LTE Device as sending or receiving data to from the LAN at 1000
Mbps
Green
(Fast Ethernet)| On| The LTE Device has a successful 10 100 leaps Ethernet
connection with a device as the Local Area Nenwork (LAN)
Blinking| The LTE Device is sending a rectum data to ftom the LAN at 10 100
Mbps
Off| The LTE Device does not hr. e as Ethernet connection voids the LAN
Step 6. The Connection Status screen appears 
Accessing the web configuration
Step 1. Make sure all hardware is properly connected
Step 2. Launch your web browser
Step 3. Type 192.168.1.1 as the URL
Step 4. The Web Configurator password screen displays.
•For user access, type “user” as the default username and “LTE@Endusr” as the
default password.
Click login. If you have changed the password, enter your own password and
click Login. 
Step 5. The following
screen displays if you have not yet changed your password. It is strongly
recommended you change the default password. Enter a new password, retype it
to confirm and click Modify; alternatively click Skip to proceed to the main
menu if you do not want to change the password now. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>