DigiTech Trio+ Band Creator and Looper Pedal Instruction Manual
- June 10, 2024
- Digitech
Table of Contents
- Trio+ Band Creator and Looper Pedal
- Product Information
- Product Usage Instructions
- U.K. MAINS PLUG WARNING
- DISPOSAL
- WARNING FOR YOUR PROTECTION READ THE FOLLOWING
- ELECTROMAGNETIC COMPATIBILITY
- SAFETY INSTRUCTIONS
- DECLARATION OF CONFORMITY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Trio+ Band Creator and Looper Pedal
Product Information
The product is a device that has certain safety instructions that need to be
followed. The device should not be used above an altitude of 2000m. The device
comes with a molded mains plug, which should not be cut off from the cord. If
cut, the mains plug should be discarded at a suitable disposal facility. The
device should not be used with a damaged or cut mains plug. The fuse cover
should be
in place and replacement fuse covers can be obtained from local retailers. The
fuses used should be 13 amps and ASTA approved to BS1362. The device should
not be disposed of with general household waste but should be returned to
designated collection facilities or to a retailer. The device should not be
used near water and should only be cleaned with a dry cloth. It should only be
used indoors and not near any heat sources such as radiators or stoves. The
attachments or accessories used with the device should be specified by the
manufacturer. The power cord should be protected from being walked on or
pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus. The device should only be used with the cart
stand, tripod bracket, or table specified by the manufacturer.
Product Usage Instructions
When using the device, ensure that it is not used above an altitude of 2000m. Do not cut off the molded mains plug from the cord and do not use the device with a damaged or cut mains plug. Ensure that the fuse cover is in place and that replacement fuse covers are obtained from local retailers. Only use ASTA approved fuses of 13 amps and dispose of the device at designated collection facilities or to a retailer. Keep the device away from water and clean it only with a dry cloth. Use the device only indoors and away from any heat sources such as radiators or stoves. Use only attachments or accessories specified by the manufacturer. Protect the power cord from being walked on or pinched. Use the cart stand, tripod bracket, or table specified by the manufacturer when using the device. Refer all servicing to qualified service personnel if the apparatus is damaged in any way. The power switch used in this device does not break the connection from the mains.
The symbols shown above are internationally accepted symbols that warn of potential hazards with electrical products. The lightning flash with arrowpoint in an equilateral triangle means that there are dangerous voltages present within the unit. The exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the owner’s manual. These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service. Disconnect the unit during storms to prevent damage.
U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off from the cord is unsafe. Discard the mains plug at a suitable disposal facility. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT MAINS PLUG INTO A 13 AMP POWER SOCKET. Do not use the mains plug without the fuse cover in place. Replacement fuse covers can be obtained from your local retailer. Replacement fuses are 13 amps and MUST be ASTA approved to BS1362.
DISPOSAL
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For Countries not mentioned above, please contact your local authorities for a correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.
WARNING FOR YOUR PROTECTION READ THE FOLLOWING
- READ THESE INSTRUCTIONS.
- KEEP THESE INSTRUCTIONS.
- HEED ALL WARNINGS.
- FOLLOW ALL INSTRUCTIONS.
- DO NOT USE THIS APPARATUS NEAR WATER.
- CLEAN ONLY WITH A DRY CLOTH.
- FOR INDOOR USE ONLY
DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
POWER ON/OFF SWITCH: The Power switch used in this piece of equipment
DOES NOT break the connection from the mains.
MAINS DISCONNECT: The plug shall remain readily operable. For rack-mount
or installation where plug is not accessible, an all-pole mains switch with a
contact separation of at least 3 mm in each pole shall be incorporated into
the electrical installation of the rack or building. If connected to 240V
supply, a suitable CSA/UL certified power cord shall be used for this supply.
ELECTROMAGNETIC COMPATIBILITY
This device complies with part 15 of the FCC Rules and the Product Specifications noted on the Declaration of Conformity . Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- Operation of this unit within significant electromagnetic fields should be avoided.
- use only shielded interconnecting cables.
SAFETY INSTRUCTIONS
NOTICE FOR CUSTOMERS IF YOUR UNIT IS EQUIPPED WITH A POWER CORD.
WARNING: THIS APPLIANCE SHALL BE CONNECTED TO A MAINS SOCKET OUTLET WITH
A PROTECTIVE EARTHING CONNECTION. THE CORES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE: GREEN AND YELLOW – EARTH BLUE – NEUTRAL
BROWN – LIVE AS COLOURS OF THE CORES IN THE MAINS LEAD OF THIS APPLIANCE MAY
NOT CORRESPOND WITH THE COLOURED MARKINGS IDENTIFYING THE TERMINALS IN YOUR
PLUG, PROCEED AS FOLLOWS:
- THE CORE WHICH IS COLOURED GREEN AND YELLOW MUST BE CONNECTED TO THE TERMINAL IN THE PLUG MARKED WITH THE LETTER E, OR WITH THE EARTH SYMBOL, OR COLOURED GREEN, OR GREEN AND YELLOW.
- THE CORE WHICH IS COLOURED BLUE MUST BE CONNECTED TO THE TERMINAL MARKED N OR COLOURED BLACK.
- THE CORE WHICH IS COLOURED BROWN MUST BE CONNECTED TO THE TERMINAL MARKED L OR COLOURED RED.
THIS EQUIPMENT MAY REQUIRE THE USE OF A DIFFERENT LINE CORD, ATTACHMENT PLUG, OR BOTH, DEPENDING ON THE AVAILABLE POWER SOURCE AT INSTALLATION. IF THE ATTACHMENT PLUG NEEDS TO BE CHANGED, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WHO SHOULD REFER TO THE TABLE BELOW. THE GREEN/YELLOW WIRE SHALL BE CONNECTED DIRECTLY TO THE UNITS CHASSIS.
CONDUCTOR | WIRE COLOR |
---|---|
Normal | Alt |
L | LIVE |
N | NEUTRAL |
E | EARTH GND |
WARNING: IF THE GROUND IS DEFEATED, CERTAIN FAULT CONDITIONS IN THE UNIT OR IN THE SYSTEM TO WHICH IT IS CONNECTED CAN RESULT IN FULL LINE VOLTAGE BETWEEN CHASSIS AND EARTH GROUND. SEVERE INJURY OR DEATH CAN THEN RESULT IF THE CHASSIS AND EARTH GROUND ARE TOUCHED SIMULTANEOUSLY.
DECLARATION OF CONFORMITY
- Manufacturer’s Name: DigiTech
- Manufacturer’s Address: 59 Hwagok-ro 61gil
- Supplementary Information: The product herewith complies with the requirements of the: Low Voltage Directive 2006/95/EC
- declares that the product:
- EMC Directive 2004/108/EC RoHS Directive 2011/65/EC WEEE Directive 2002/96/EC
- Product name: TRIO+ (Plus)
- Product option: all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent).
- EC Regulation 278/2009: With regard to Directive 2005/32/EC and EC Regulation 1275/2008 of 17 December 2008, this product is designed, produced, and classified as Professional Audio Equipment and thus is exempt from this Directive.
- conforms to the following Product Specifications: CORTEK Corp. 59 Hwagok-ro 61gilGangseo-gu, Seoul 07590 Republic of Korea support@digitech.com
EMC:
- EN 55103-1:2009
- EN 55103-2 2009
- FCC Part 15
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>