NESPRESSO 100 Momento Coffee Instruction Manual
- June 10, 2024
- Nespresso
Table of Contents
NESPRESS O MOMENTO PRE-INSTALLATION REQUIREMENTS
Product Information
The Nespresso Momento is a coffee machine that is available in three different models: Momento 100, Momento 200, and Momento 120. The machine requires electricity with a voltage of 120VAC for Momento 100 and 208VAC for Momento 200 and Momento 120. The power consumption varies depending on the model, with Momento 100 requiring 1200W, Momento 200 requiring 2450W, and Momento 120 requiring 1700W. The machine comes with a cord length of 7 feet 9 inches.
For Momento 200 and Momento 120, a power converter is required. The machine also requires a correct breaker, correct plug receptacle, and correct voltage to function properly. The dimensions of the Nespresso Momento vary depending on the model, with Momento 100 having dimensions of 12W x 16.5H x 20D, Momento 200 having dimensions of 22W x 16.5H x 20D, and Momento 120 having dimensions of 22W x 21.5H x 19.7D. The weight of the machine also varies depending on the model, with Momento 100 weighing 35 lbs, Momento 200 weighing 62 lbs, and Momento 120 weighing 92.5 lbs.
The Nespresso Momento requires a direct water connection, and a pressure regulator is required for water pressure greater than 60 PSI and businesses located on the second floor or higher. A ScaleGard filter valve and cartridge are also required for the direct water connection.
Product Usage Instructions
Before using the Nespresso Momento, ensure that the machine is set up correctly with the correct breaker, correct plug receptacle, and correct voltage. For Momento 200 and Momento 120, a power converter is required. The machine also requires a direct water connection and a pressure regulator is required for water pressure greater than 60 PSI and businesses located on the second floor or higher. A ScaleGard filter valve and cartridge are also required for the direct water connection.
To use the Nespresso Momento, follow these steps:
- Fill the water tank with clean, fresh water.
- Insert a Nespresso capsule into the machine.
- Select the desired coffee size and strength using the touch screen display.
- Press the start button to begin the coffee brewing process.
- Once the coffee has finished brewing, remove the used capsule from the machine and dispose of it properly.
- Clean the machine regularly according to the user manual instructions.
Note: Always ensure that the Nespresso Momento is set up correctly and that all minimum requirements are met before using the machine. If you require a copy of a Certificate of Insurance (COI) or to be listed as a certificate holder, a letter of requirements on your business letterhead must be furnished outlining the certificate holder’s business name, complete address, email address, fax number, and insurance coverage requirements by coverage category.
ELECTRICITY
- CORRECT VOLTAGE
- CORRECT BREAKER
- CORRECT PLUG RECEPTACLE
MACHINE TABLE
NESPRESSO MOMENTO 100
| ****
120 VAC
| ****
1200W
| ****
60
| ****
15
| 5-15P PLUG| 5-15R RECEPTACLE
---|---|---|---|---|---|---
NESPRESSO MOMENTO 200
| ****
208 VAC
| ****
2450W
| ****
60
| ****
15
| ****
6-15P PLUG
| ****
6-15R RECEPTACLE
NESPRESSO MOMENTO 120
| ****
208 VAC
| ****
1700W
| ****
60
| ****
15
| 6-15P PLUG| 6-15R RECEPTACLE
- CUSTOMER INITIALS
- CUSTOMER INITIALS
POWER CONVERTER (FOR NESPRESSO MOMENTO 200 AND NESPRESSO MOMENTO
120
DIMENSIONS
DIMENSION TABLE
| 1 | NESPRESSO MOMENTO 100 | 12”W X 16.5”H X 20”D | 35 lb |
|---|---|---|---|
| 2 | NESPRESSO MOMENTO 200 | 22”W X 16.5”H X 20”D | 62 lb |
| 3 | NESPRESSO MOMENTO 120 (W/ BASE) | 22″W X 21.5″H X 19.7″D | 92.5 lb |
- CONFIG 3
- CUSTOMER INITIALS
- NESPRESSO INITIALS
PLUMBING
DRAIN SPECIFICATIONS FOR NESPRESSO MOMENTO 120 (DRAIN IS OPTIONAL)
- DRAIN DIAMETER: ³/4″
- DRAIN HOLE (POWER CORD + DRAIN + FILTER LINE): 3″
- DRAIN HOLE (DRAIN + POWER LINE OR DRAIN + FILTER LINE): 2″
PLACEMENT
WATER CONNECTION
- CHECK HERE IF WATER CONNECTION AND FILTER IS NOT REQUIRED / POUR OVER SETUP
- CHECK HERE IF WATER CONNECTION IS REQUIRED AND ENSURE THAT THE NEXT FOUR POINTS ARE AVAILABLE :
- SHUT OFF VALVE
- ³/8″ NPT FEMALE CONNECTOR WATER SOURCE AS PICTURED
- DISTANCE OF WATER SOURCE < 12 FT FROM MACHINE
- ³/8″ COMPRESSION ADAPTER IF TEEING INTO EXISTING WATER LINES
PRESSURE REGULATOR IS REQUIRED FOR:
- WATER PRESSURE GREATER THAN 60 PSI AND
- BUSINESS LOCATED ON 2ND FLOOR OR HIGHER
CUSTOMER INITIALS
NESPRESSO INITIALS
LIABILITY
IF CUSTOMER REQUIRES A COPY OF A CERTIFICATE OF INSURANCE (COI) OR TO BE LISTED AS A CERTIFICATE HOLDER, A LETTER OF REQUIREMENTS ON CUSTOMER’S BUSINESS LETTERHEAD MUST BE FURNISHED OUTLINING CERTIFICATE HOLDER’S BUSINESS NAME, COMPLETE ADDRESS, EMAIL ADDRESS, FAX NUMBER AND INSURANCE COVERAGE REQUIREMENTS BY COVERAGE CATEGORY.
AGREEMENT
BY SIGNING THIS FORM YOU ACKNOWLEDGE THAT THE SITE FOR INSTALLATION IS OR WILL BE READY WITH ALL MINIMUM REQUIREMENTS OUTLINED ON THIS FORM PRIOR TO YOUR SCHEDULED APPOINTMENT. IF THE SITE IS NOT PREPARED BY THE DATE AND TIME SET FOR YOUR INSTALLATION AND YOUR APPOINTMENT IS NOT RESCHEDULED OR CANCELLED AT LEAST TWENTY-FOUR (24) HOURS PRIOR TO THE ARRIVAL OF OUR CERTIFIED SERVICE PROVIDER, YOU AGREE TO PAY A FEE FOR RESCHEDULING YOUR APPOINTMENT AS DETERMINED BY NESPRESSO USA, INC.
PRINT:
SIGNATURE:
DATE:
CONTACT US: 800.566.0571
NESPRESSO.COM/PRO/US/EN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>