soundlogic 12471 Wireless Charger Lamp Instruction Manual
- June 4, 2024
- SOUNDLOGIC
Table of Contents
soundlogic 12471 Wireless Charger Lamp
Content
- 1pcs Product
- 1pcs user manual
- 1pcs Charging cable
Specifications
Dimensions | 121250375mm |
---|---|
Material | ABS+ Metal |
Power input (DC) | 9V/ 3 A |
--- | --- |
Wireless charging output | 10W |
USB output | 5V2A |
Operating frequency | 110 – 200 kHz |
Coil | Single coil |
Charging efficiency | 65% |
Charging distance | ≤8 mm |
Maximum radio-frequency power | 22.03dbuA/m at 116.8khz |
Operating temperature | -10°C-30°C |
Humidity | 30% – 60% |
Instructions
- Wireless charger area
- Brightness button ( Down)
- Switch for lamp / change the light mode
- Brightness button ( Up)
- Micro charging port
- USB output
(How to charge your smartphone)
- Place the wireless charging lamp on a flat surface.
- Plug the micro-USB side of the included charging cable into a micro charging port (5).
- Plug the USB-A side of the included charging cable into a suitable wall charger or another power source, not included. (5 V/2 A)
- Put the wall charger into an easily accessible power socket.
- Place your smartphone phone onto the wireless charging area (1) with the backside down.
- Your device will start to charge.
(How to use the lamp)
- Turn on the lamp by a switch (3)
- Touch the switch (3) once for cold white light, touch twice for strong warm light, touch the switch three times for cold Warm white light, and touch four times to off the light
- Long touch button (2) to down the brightness, long touch button (4) to up the brightness
Cleaning
- Do not expose the wireless charging lamp to liquid, moisture, or humidity to avoid the product’s internal circuit being affected.
- Don’t use abrasive cleaning solvents to clean the device.
- Only clean the product with a slightly damp cloth and mild washing-up liquid
WEEK:
This product bears the selective sorting symbol for Waste Electrical and
Electronic Equipment (WEEE). This means that this product must be handled
pursuant to European Directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment. The user has the choice
to give this product to a competent recycling organization or to a retailer
when buying a new electrical or electronic piece of equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>