VONYX ST-012 Personal PA Wireless System UHF with Bodypack Instruction Manual

June 10, 2024
VONYX

VONYX logo

ST012 Personal PA Wireless System
UHF with bodypack
Ref. nr.: 178.870

VONYX ST-012 Personal PA Wireless System UHF with
Bodypack

INSTRUCTION MANUAL

ST-012 Personal PA Wireless System UHF with Bodypack

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

– Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
– The unit contains voltage carrying parts. Therefore do NOT open the housing.
– Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
– Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
– The unit is not suitable for continuous use.
– Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
– When unplugging the unit from a mains outlet, always pull the plug, never the lead.
– Do not plug or unplug the unit with wet hands.
– If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
– If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
– To avoid fire and shock hazard, do not expose the unit to rain and moisture.
– All repairs should be carried out by a qualified technician only.
– Connect the unit to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16A fuse.
– During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
– If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
– To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
– Do not repeatedly switch the fixture on and off. This shortens the life time.
– Keep the unit out of the reach of children. Do not leave the unit unattended.
– Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
– Do not force the controls.
– If this unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
– If this unit is with built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
– If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
– If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
– Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
– Keep away from electronic equipment that may cause interference.
– Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
– Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
– Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
– The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
– Keep the original packing material so that you can transport the unit in safe conditions.

**** This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

**** Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

Description of the amplifier:

  1. Volume Control
  2. Tone Control
  3. Audio Input
  4. USB socket
  5. Wired mic input
  6. Power On/Off

A. Operation of the Amplifier:
Firstly, make sure the amplifier is available in the current power voltage.

  1. Using AC power supply:
    Connecting with AC power, please switch to POWER ON position, and the power indicator turns green ,it shows the amplifier works normally(If suddenly AC power is cut off, the built –in rechargeable will supply power automatically);

  2. Using DC power supply:
    Switch to POWER ON position, and the power indicator turns green, it works normally, it has a low power warning set, if it’s low battery, it will provides a “BEEP” sound to inform the users to charge the amplifier.

Caution: Please switch to “POWER OFF” position when you finish using the amplifier, otherwise, it will influence battery life span.
B. Operation of bodypack:

  1. Open the cover, install the battery with correct polarity then close the battery cover.
  2. Switch to ON position, the indicator flash up then black out ,it means can work normally, please turn off the power after using it.
  3. The best way to set the volume in half position and then you can adjust the volume you needs.

Caution:

  1. If the bodypack is ON, but the LED indictor is dim or off, it means the battery is low or you have placed the battery wrong polarity.
  2. Please take out the battery if you do not want to use it for a period.

Operation BT-Technology:
Press “MODE” button to switch on the BT-function. Then use your mobile phone or computer to search a BT-device and connect the ST012 with your device.

TROUBLESHOOTING:

The problems might be Reasons and Resolutions
The power indicator is dim It Indicates the battery low, please change to AC

supply and charge it immediately:
Hash Howl| 1.Turn down the volume of amplifier
2.Turn the tone control to Bass
3.Adjust the distant between amplifier and microphone ,do not face the speaker of amplifier while using it
Noise| 1.Battery low of the amplifier or transmitter;
2.The microphone cord might be damaged;
3.Interference by same frequency (863.100MHz).

UHF

No license required (excluding geographical restrictions)


BE| DK| F| Fl| DE
HU| IT| NL| NO| PL
PT| RO| SI| ES| SE
CH| GB| | |

TECHNICAL SPECIFICATION

Output Power Max: 100W
Output Power: 30W
Battery: 12V DC – 1.2Ah
Frequency Response: 60Hz – 15KHz
THD: <0.1%
Diameter Woofer: 6.5”
Input Connections: 3.5mm jack, 6.3mm jack
Frequency: 863.1Mhz
Power Supply: 220-240VAC 50Hz
Dimensions: 285x160x175mm
Weight: 3.0Kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject:

United Kingdom
Tronios Ltd.,
130 Harley Street,
London W1G 7JU, United Kingdom
**** S.I. 2016:1101
S.I. 2016:1091
S.I. 2012:3032
S.I. 2017:1206

VONYX logo

Specifications and design are subject to change without prior notice.
www.tronios.com
Copyright © 2022 by TRONIOS the Netherlands

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals