SUJATA 900 Watt Powermatic Plus Mixer Grinder User Manual

OPERATING MANUAL Before operating this unit, read the instructions carefully.

IDENTIFICATION OF PARTS

JUICER

1. Plunger

2. Juicer Cover
   A. Feeder Opening
   B. Locks
   C. Clamps

3. Cutter Spinner (Filter)

4. Juice Container
   A. Locking Grooves (for Juicer Cover)
   B. Lock (for Motor Unit)
   C. Spout
   D. Spout Cover

5. Motor Unit
   A. Motor Housing
   B. Slots for holding Clamps (of Juicer Cover)
   C. Indicator Light
   D. Speed Knob
   E. Whip Button
   F. Mains Cord
   G. Driving Coupler made up of (1) Driving Base and (2) Driving Gear (set of teeth) 6. Driving Gear (extra)

6. Cleaning Brush

7. Pulp Container
   A. Locking Grooves

BLENDER

GRINDER

GRINDER

1. Centre Cap (measuring cup)
2. Cover
3. Stainless Steel Jar
   A. Locks

BLENDER

1. Centre Cap (measuring cup)
2. Cover
3. Liquidiser Jar
4. Rubber Packing (Washer)
5. Cutter Assembly
6. Rubber Packing (Washer)
7. socket
   A. Locks

USING AS JUICER

Before using dismantle each part and learn their disassembly and assembly methods.

DISASSEMBLY

Remove the pulp container by slightly lifting it to unlock it from the juicer cover.| Pull out the clamps which are on both sides of the motor housing.
---|---
|
Remove the juicer cover.| Lightly lift the juice container with both hands.
The filter will come out with it.
|
The filter can be easily separated from the juice container by pushing it up from the base. Dismanile each part. Wash all parts well with water except the motor housing.|

ASSEMBLY

****Place the juice container on motor housing ensuring that its locks match the locking grooves located at the top of motor housing.

Put cutter spinner (filter) in juice container.
Now lightly press the cutter spinner to ensure that it is properly fixed in position.

Place the juicer cover ( on to the juice container ) ensuring that its locks match the locking grooves of the juice container.

Fit lower ends of boththe clamps (of juicer cover ) into the slots provided on both sides of the motor housing properly.
Now firmly close the clamps from their top ends. (all the time ensuring that lower ends of the clamps remain properly fit into the motor housing).

lf the clamps are not fixed properly, the juicer cover will get dislodged and cutter spinner may come out with great force and cause severe injury to the user and people around.

Put pulp container in locked position by pushing it.

EXTRACTING THE JUICE
For extracting juice from vegetables /fruits having large and hard seeds like Amla, Peach etc. take out / remove the seeds first. Only after removing the seeds, juicing is to be done otherwise the cutter spinner will get damaged and juicer dismantled resulting in an accident which may cause severe bodily injury to the user and people around.
Fruits like Banana, Papaya etc. (whether ripe or unripe) should never be juiced because of non juicy nature o f their pulp. If they are juiced, cutter spinner will get damaged and juicer dismantled resulting in an accident which may cause bodily injury to the user and people around.

Place a glass under spout to collect juice and switch the juicer on to ‘LOW’ speed.
Now put the fruit and vegetable into feeder opening. Use the plunger because most fruits and vegetables need additional help.

The fruit is completely crushed by the cutter. The juice and pulp are automatically separated. Transparent juicer cover lets you know when it is time to empty pulp container.

CLEANING THE JUICER

The plug should be disconnected. Follow instructions for disassembly of juicer. Rinse each part in cold or luke warm water. Cutter spinner also works as the filter, so rinse this especially well. After rinsing, wipe the water off and let it dry before storing.

USING THE BLENDER

HOW TO USE

Place the Blender on the motor unit firmly. Turn the Blender clockwise to lock it.

Plug into a convenient electric outlet. Put Ingredients into jar and cover it. Select ‘MED’ speed by turning the knob. However a speed different than the one suggested above can be used to suit the recipe.

CLEANING THE MOTOR UNIT

To clean the motor housing, simply wipe with a damp cloth and dry. Never immerse motor housing in water.

CLEANING THE BLENDER

DISASSEMBLY

To clean the liquidiser jar quickly and thoroughly, fill the jar one third full of luke warm water and add a few drops of detergent or soap flakes. Switch the motor ON and run for some time.
The soapy water will clean the jar . Switch off the motor and empty the blender jar.
Refill the jar with fresh water without any detergent. Restart the motor and empty the jar again after switching off.
Place the liquidiser jar upside-down and unscrew the socket anti-clockwise.

Remove the lower Rubber packing (washer).
Remove both the cutter assembly and upper rubber packing (washer).

Remove the upper rubber packing from cutter assembly.

Rinse well each part and wipe off the water with a cloth and let them dry before storing.

ASSEMBLY
Follow the above sequence in reverse order t o assemble again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>