SAMSUNG RF29CB9900QK 29 cu. ft. French Door Refrigerator User Manual

RF29CB9900QK 29 cu. ft. French Door Refrigerator

Product Information: 29 cu. ft. French Door Refrigerator

• Model: RF29CB9900QK
• Dimensions
  • Width (fits 36″ opening): 35 7/8″
  • Depth to door: 34 1/4″
  • Depth without door: 29 3/8″
  • Height without hinge: 70 3/4″
  • Height with doors and hinge: 73″
  • Depth without rear wall (2 wall clearance) top of refrigerator
  • cutout depth: 31 3/8″
  • Total installation depth: 36 1/4″
  • Standard depth refrigerator

Product Usage Instructions

• Ensure that the refrigerator fits in your desired location by measuring
  • Height including flooring, allow for hinge clearance height if needed
  • Width including countertop overhang
  • Depth including molding or trim
• Allow for installation clearances
  • Allow 3.75″ of clearance when installing along a wall to allow for the door to open 90 degrees without the handle contacting the wall
  • Allow 2″ minimum clearance at the rear for proper air circulation and water/electrical connections
  • Allow a 3/8″ minimum clearance at the sides and top for ease of installation
  • Do not install next to a wall for optimal usage and ability to open refrigerator doors completely
• When installing, ensure the appliance depth or width is smaller than the width of the narrowest opening from outside the home to the location where it will be installed
• For complete installation details, consult the manual packed with the product or download the manual online at samsung.com

Be sure your new fridge will fit

Don’t wait until delivery to be sure your new refrigerator will fit – both in your kitchen and through all doorways. This guide includes all pertinent measurements and clearances so you can buy with confidence.

Standard Depth Refrigerator

Standard depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter-depth refrigerators that sit flush with cabinetry.

Installation clearances

• 3 Allow 3.75″ of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.
• 3 Allow 2″ minimum clearance at rear for proper air circulation and water/electrical connections.
• 3 Allow a 3/8″ minimum clearance at sides and top for ease of installation. For optimal usage and ability to open refrigerator doors completely, do not install next to a wall.

Please note: The above dimension and cutout information is for planning purposes only. For complete installation details, consult manual packed with product or download manual online at samsung.com.

Walk the delivery route

3 Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed. 3 Appliance depth or width must be smaller than the width of the narrowest opening.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>