VIVILUMENS AS1T-W Aromatherapy Speaker User Manual

VIVILUMENS AS1T-W Aromatherapy Speaker

FEATURES

OPERATION GUIDE

Getting started

1. Toggle the power switch to the left to power on with a prompt sound.

Wireless speaker pairing

1. The light on the Aromatherapy Diffuser Plate sparkle slowly , indicating the device is searching for pairing.

2. At this moment , turn on the BT function of your mobile phone , select the “ASI T-W” from the list of avaible device.
   After successful paring, the prompt sound will ring up again and the light on the Aromatherapy Diffuser Plate will stop sparkling.

3. Ifthe pairing failed for more than 10 minutes , the wireless speaker will automatically switch to Sleep mode. Repeat the getting started process.

CHARGING INDICATOR

1. The indicator turns red when the speaker is being charged.
2. The indicator turns green when the speaker is fully charged.
3. The indicator blinks slowly when the speaker is in low battery.

SPECIFICATIONS

• Product name: Aromatherapy Speaker
• Product number: AS I T-W
• Product dimensions: 124.6×84.2×68.2mm
• Input: 5V— IA
• Battery capacity: 1200mAh
• Wireless version: 5. I
• Working distance < 10m
• Speaker output power : 4Q/5W
• Package contents :
  • 1 * Aromatherapy speaker
  • 3 * Aromatherapy tablet
  • 1* USB cable
  • 1 * Product manual

IMPORTANT NOTES

• Do not use or store the product in the place of direct sunlight or high temperature for a long time.
• Do not charge the product in the place where is too close to the magnetic recording medium of the magnetic card and the precise nstrument.
• Do not disassemble or modify the product.
• Do not touch the AC adapter with wet hands
• Keep this product away from water or other liquids.
• Disconnect the power when clearing the product.
• Working temperature range of the product.(Do not leave the product or use it in any area where the temperature is likely to drop below 32F , or may exceed 140F, such as in a closed vehicle on a hot day . )

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.
   The device has been evaluated to meet general RF exposure requirement.
   The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>