VIVILUMENS S22 White Noise Wireless Charger Table Lamp User Manual

VIVILUMENS S22 White Noise Wireless Charger Table Lamp

SPECIFICATIONS

Wrreless charging compatible device

{fhe above are .a part of mainstream devices)

|

APPLE

SAMSUNG

IWAWIE

| iphonc 8/iphonc 8 plusiphonc II/ II pro/ 11 Pro Max/iphone Xs/ Xs Max/iphone XR/iphone 12/iphonc 12 Pro

GalaxyS6 /GalaxyS7 /GalaxySB

/GalaxyS9 /Note8 /Note9

Mate RS/Mate 20 Pro/Mate 20RS fP30 Pro

XIAOMI| MIX2S/MIX3
USB port of cable| Standard type c

PRODUCT FEATURES

• Simple and exquisite design
• Adjustable phone holder
• Wireless charging
• White noise machine
• Night light
• Wireless speaker

APPEARANCE FEATURES

1. CD White noise sound
2. Fan sound
3. Rain sound
4. Wave
5. Tibetan bowl +fountain
6. 30-minutes timing
7. 60-minutes timing
8. X-Cancel timing
9. Touch lamp
10. Wireless cha,ging area
11. Type-c charging port
12. Key functions
13. White noise&Wirless speaker indicator light (blue)
14. Wireless charging indicator light (blue)
15. Power indicator light (white)

GETTING STARTED-DIRECTJOJ\S FOR WIRELESS CHARGING

1. CoDDcct the USB-A connector to a power sOW”Cc and the USB-C connector end to the White Noise Wireless Charger Table Lamp .
2. A white led light will turn on next to the plug to indicate the wireless charging pad is on and ready for charging . Pul your device thal is capable for wireless charging on the charger, and the led light will tum on to indicate the device is charging.

DIRECTIONS FOR OPERATING THE TABLE LAMP

Touch button

1. Connect tlie USB-A connector to a power source and the USB-C connector end to the White Noise Wireless Charger Table Lamp .
2. Touch on button to operate the Table Lamp
3. 1st touch to tum on the lamp at 30% bright=ss
4. 2nd touch to adjust the lamp to 70% brightness
5. 3rd touch to adjust the lamp to I 00% brightness.
6. 4th touch to turn off the lamp.

DIRECTIONS FOR OPERATING THE WHITE NOISE

1. Connect the USB-A connector lo a power source and The USB-C connector end to the White Noise Wireless Charger Table Lamp.
2.  Hold and press the[► ]button for 3 seconds to power on or off and single click the[►] button to play or pause.
3. Single Click [ + ] to raise the volume. Single Click[ – ] to lower the volume.
4. Sound ICON operations

• Touch  the play the white noise.
• Touch the to play the fan sound ,
• Touch the  10 play the rain sound.
• Touch the  8 to play the wave sound.
• Touch the (it to play the Tibetan bowl +fountain sound.
• Hold and Touch the for 3 seconds to set the 30 minutes play time (The indicator light will flash blue).
• Hold. and Touch the for 3 second, lo set the 60 minutes play Lime (The indicator light will flash blue).
• Hold and Touch the for 3 seconds to cancel the timing play se1ting.

DIRECTIONS FOR OPERATING THE WIRELESS SPEAKER

• Connect the USB-A connector to a power source and the USB-C connector end to the White Noise Wireless Charger Table Lamp.

• Hold and press the[►]for 3 seconds to power on or off.
  Double-click the[►], the indicator light will flash blue, indicating that the device is in wireless speaker mode.

• Go to the Bluetooth Setting on your mobile device.
  Turn the Bluetooth ON. On your Bluetooth device, seleceS22” from the list of avails devices.
  The blue indicator stop flashing to indicate they arc connected . Double click to disconnect the bucktooth decic to enter into the White Sound Mode .

• Press and hold the [ +] to skip to the next audio track Single click to raise the volume.

• Press and hold the [ -]to skip the previous audio track Single click to lower the volume.

Remarks:
This product supports wireless charging and conforms to Qi wireless charging standard; short distance radio energy transmission is realized through magnetic induction. This device supports a11 wireless charging devices confining to Qi standard. When 5V output adapter is used, the wireless” charger supports 5W load When adapter of QCQ2.0 or above is , the wireless charger supports 10W load. ft is featured with overcharge protection ,Overvoltage protection (9V) and overcurrent protection (2A).

IMPORTANT NOTES

• Do not use or store the product in the place of direct sunlight or high temperature for a long time.
• Do not charge the product in the place where is too close to the magnetic recording medium of the magnetic card and th.e precise nstrument
• Do not disassemble or modify the product.
• Do not touch the AC adapter with wet hands.
• Keep this product away from water or other liquids.
• Disconnect the power when clearing the product.
• Working temperature range of the product.(Do not leave the product or use it in any area where the temperate is likely to drop below 32F , or may exceed 140F, such as in a closed vehicle on a hot day.)

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits arc designed to provide reasonable protection against harmful interference in a residential installation. 1bis equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will no occur in a particular installation. If this equipment  cause harmful interface to radio or television reception, which can be determined by turning the equipment off .and on, the user is encouraged to try to current the interforce by one of the following measures:

• Reorient or relocate the receiving antenna.
• Incrta1se the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to mm general RF exposure requirement.
The device can the in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>