HiB 79530800 Arena 80 LED Ambient Oval Mirror Instruction Manual
- June 4, 2024
- HiB
Table of Contents
HiB 79530800 Arena 80 LED Ambient Oval Mirror Instruction Manual
This product is IP44 rated and is suitable for installation in zones: FI#01 017 R211007 Ver No. 3.0 Jan 2020 2 & Outside Zone
All installations must comply with guidelines which are based on a zonal concept. The diagram above illustrates this concept and must be followed to ensure the safe installation of electrical appliances in the bathroom. These regulations apply to domestic installations only. HiB recommends that all electrical bathroom products must be installed in accordance with current building and wiring regulations. If in doubt please contact an electrician.
Illuminated Mirrors
| Name | Art No. | Name | Art No. |
|---|---|---|---|
| Arena 80 | 79530800 | Globe 90 | 78640000 |
| Arena 120 | 79531200 | Globe 120 | 78700000 |
| Duplus 50 | 78727000 | Globe 140 | 78710000 |
| Duplus 60 | 78728000 | Vega 40 | 78749000 |
| Duplus 80 | 78729000 | Vega 50 | 78750000 |
| Globe 45 | 78400000 | Vega 60 | 78751000 |
| Globe 50 | 78500000 | Vega 80 | 78752000 |
| Globe 60 | 78600000 | Vega 120 | 78748000 |
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them during installation to ensure that your product is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
Before installation, ensure the domestic electrical mains supply to which the mirror is to be connected is turned off. Before drilling, ensure that there are no hidden cables or pipes in the wall.
This product contains a light source of energy efficiency class E
Installation
- Position the mirror in a suitable location (according to the zonal diagram – Fig. 1), ensuring that the domestic electrical mains supply is within reach of the electrical entry point of the product.
- Carefully mark the position of the mirror using a soft pencil ensuring it is level. Remove the mirror and mark the mounting points. Please ensure that all marked mounting points accurately match up with the fixing points on the mirror.
- Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If drilling through tile, use a ceramic drill bit.
- Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall plugs should be inserted below the tile surface to avoid cracking. NB. For plasterboard walls, specialist fixings should be purchased, available from any DIY or hardware store.
- Screw supplied fixings into wall plugs.
- Ensure the domestic electrical mains supply to which the mirror is being connected is turned off. Connect the domestic mains supply to the terminal box according to the wiring diagram (Fig. B) overleaf.
- Hang the mirror in position.
- Switch the domestic electrical mains supply for the mirror back on.
NB. LED Mirrors with charging socket only; On first use of the charging socket, there may be resistance when inserting the plug. Make sure that the mirror is held firmly so that it is not pushed off the wall. After a few uses, resistance will ease and the socket will function as normal.
WEEE compliance
Must not be mixed with general household waste
Mounting Points Diagram (Fig. A)
Operation Instructions
Arena / Vega – To turn illumination on or off, press the touch sensor. To cycle through warm to cool colour temperature, press and hold the touch sensor – release when the desired colour temperature has been reached. Heated Pad is only on when mirror is illuminated.
Globe / Duplus – To turn illumination on or off, wave hand past the sensor on the side/bottom of the mirror. To alter the colour temperature, hold your hand over the sensor, remove hand when the desired colour temperature has been reached. Heated Pad is only on when mirror is illuminated.
NB. Globe / Duplus mirrors must be installed with a minimum distance of 150mm between the infra-red sensor switch and any adjacent wall or object to ensure correct operation of the sensor.
Wiring Diagram (Fig. B)
Care Instruction
Do not use abrasives or solvents when cleaning this product. Wipe off all water spillages as soon as possible using a soft, damp cloth.
Aftercare Service
In the unlikely event that this product should fail please contact HiB customer services, details shown below. Wipe off all water spillages as soon as possible using a soft, damp cloth.
T: +44 (0)20 8441 0352
F: +44 (0)20 8441 0219
E:sales@hib.co.uk
hib.co.uk
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>