HUAWEI T0004 FreeBuds Lipstick User Guide

HUAWEI T0004 FreeBuds Lipstick

Product Information

The FreeBuds Lipstick is an earphone model with a charging case model T0004K. The earphones have an inner and outer indicator, a charging port, and a function button. The earphones come with the HUAWEI AI Life app that can be downloaded and installed using the QR code provided in the manual. The app allows for customization of earphone settings and features. The earphones have semi-open active noise cancellation (ANC) technology that cancels low- frequency noise but cannot completely eliminate noise.

**Downloading and installing the app

**

To download and install the HUAWEI AI Life app, scan the QR code provided in the manual using your smartphone’s camera app. The app allows for customization of earphone settings and features.

**Pairing

**

To pair the earphones with your device, open the charging case and press and hold the function button for 2 seconds until the inner indicator flashes white to enable pairing mode. The earphones will automatically enter pairing mode when you open the case for the first time.

1. Inner indicator
2. Outer indicator
3. Charging port
4. Function button

Shortcut controls

To adjust the volume, swipe up or down. To play/pause music, double-tap. To answer/end a call, double-tap. To reject an incoming call, press and hold. To enable/disable noise canceling, press and hold. You can customize the double- tap shortcut in HUAWEI AI Life to switch to the previous or next song or wake up the voice assistant.

• Adjust volume: Swipe up or down.
• Play/Pause music: Double-tap.
• Answer a call/End a call: Double-tap.
• Reject an incoming call: Press and hold.
• Enable/Disable noise canceling: Press and hold

You can also customize the double-tap shortcut in HUAWEI AI Life to allow your earphones to switch to the previous or next song, or wake up the voice assistant.

Charging

Charging the case
To charge the case, connect it to a USB-C cable. The outer indicator will remain steady on when the case is being charged.

• Connect the case to a USB-C cable to charge it.
  • The outer indicator will remain steady on when the case is being charged.

Charging the earphones
To charge the earphones, place them in the charging case and close the case. They will start charging automatically. The earphones inside will not be charged when the case is open.

• Place the earphones in the charging case and close the case. They will start charging automatically.
  • The earphones inside will not be charged when the case is open.

**Factory reset

**

To factory reset the earphones, open the case and press and hold the function button for 10 seconds until the inner indicator flashes red. Open the case. Press and hold the Function button for 10s until the inner indicator flashes red. The earphones will enter Pairing mode again

Noise canceling
The semi-open active noise cancellation (ANC) earphones perform better at canceling low-frequency noise and cannot completely eliminate noise. Ensure the earphones fit tightly and securely in your ears to achieve good noise- canceling effects.

• The semi-open active noise cancellation (ANC) earphones perform better at canceling low-frequency noise and cannot completely eliminate noise.
• The noise canceling performance of semi-open ANC earphones depends on the way you wear the earphones. Ensure the earphones fit tightly and securely in your ears to achieve good noise-canceling effects.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>