ApoSun CHDS8A Series Process Panel Meter Instruction Manual
- June 10, 2024
- APOSUN
Table of Contents
ApoSun CHDS8A Series Process Panel Meter Instruction Manual
1. Model number and ordering info.
2. Technical specifications
The instrument accepts many types of signals input as 4-20mA, 0-10V, 0-75mV, TC/RTD, load cell, etc.. This makes it applicated in different applications , such as temperature, pressure, weighting, resistance, current and voltage measurement. We also provide 20-stage programmable setting for no-linear input. The input, output and power supply are isolated from each other.
3.Size and mounting
4.Panel description
5.Wiring diagram
Remark Above is a general wiring diagram. Please always refer to the connection diagram on the side of the controller.
6.Setting and programming
6.1 Power on initialization
Power on for self-checking and showing input type & display value range.
6.2 Input signal selection(How to change the signal InP=mA setting
value)
6.3 Alarm setting (How to change alarm AL1=50.0, AM1=L)
6.4 Reset zero
6.5 Rate configuration
◆ PV value=Rate×(UPS-LSP)+PVF (USP, LSP refer to the parameter menu)
◆ The decimal point moves automatically once the value increases. For example,
the present SV is 9.000, when press increase, the display changes to 10.00.
6.6 How to configure all configurable parameters
Remark The instrument will return to the measuring estate if no any operation for 25 seconds
7. Parameter menu
Remark Depends on the specific functions, some of parameter may or may not be available.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>