Karran KKF340 Kadoma Single Handle Touchless Pull Down Sprayer Installation Guide
- June 10, 2024
- karran
Table of Contents
Karran KKF340 Kadoma Single Handle Touchless Pull Down Sprayer
Models:
KKF34oss KKF340MB KKF340GG
PARTS SHEET
- Spray Head
- Faucet Body
- Quick Connector
- Hot Water Line
- Cold Water Line
- Spray Hose
- Sensor Line
- Rubber & Metal Washer
- Mounting Nut
- Mounting Screws
- Weight
- Hex Wrench
- Control Box
TECHNICAL DRAWING
INSTALLATION GUIDE
STEP 1
-
Remove the mounting nut (#9), rubber & metal washer (#8) from the faucet body (#2).
STEP 2 -
Insert the main body into the hole, refix the rubber & metal washer (#8) and mounting nut (#9).
STEP 3 -
After adjusting the direction of the main body, tighten the mounting nut (#9) with hands and tighten the mounting screws (#10) with a Philips screwdriver.
A. Fix the control box holder to the wall with the screws provided (part
A in the picture). Then attached the control box to the holder.
B. Insert the quick-connect to the control box ( part Bin the picture).
C. Connect the spray hose to control box ( part C in the picture).
D. Connect the sensor line to control box ( part Din the picture).
E. Attach the weight to the pull-out hose ( part Fin the picture).
F. Put the batteries purchased from store into the battery holder
correctly. Insert the battery pack into the holder on the wall. Then connect
the batteries line to the control box (Part E in the picture).
G. Connect the water lines to water supplies ( Part Gin the picture).
OPERATION
How to operate the handle
- Open the handle lever to turn water on. Push to turn off.
- Turn the handle lever to the left to increase hot water flow with higher water temperature. Lower the water temperature by operating reversely.
- Flush out any debris and check for leaks.
Spray
The operation of the spray diverter:
- Press the middle button and water flows out of the nozzle.
- Press button back, water comes from nozzles.
- Press the button above and water will flow out of the nozzle.
REPLACEMENT PARTS
| No. | Description | Finish/Color | Item No. |
|---|---|---|---|
| 1 | Index | 80N81051 | |
| 2 | Set Screw | 8EMSX5 | |
| 3 | Handle | SS,MB,GG | 80P35WWH2 |
| 4 | Trim Cap | SS,MB,GG | 5ZG16463 |
| 5 | Lock Nut | BYG16045 | |
| 6 | Cartridge | J10350WH13 | |
| 7 | Cartridge |
Hosing
| | 81T569167DO
8| Body| | 8EM3X6
9| Screw| | 8J168X18A
10| Induction Joint| | 7G1569X88
11| Snap Ring| | 5SJ569X88
12| Body| SS,MB,GG| 50T569X88
13| Connector| | 5YJ569 1 10
14| Protector| | 5SJ569110A
15| Spout| SS,MB,GG| 50G569180
16| Pull-out Protector| | 4SJ569168
17| Spray Hose| | H569167
18| Spray| SS,MB,GG| F3503
19| Hose| | G15603SR00
20| Ho t Water line| | G69703SR04
21| Cold Water Line| | G69703SR05
22| Check Valve| | J92031SO0
23| Quick Connector| | Jt56226
24| Connector| | 5JT569188
25| Threaded Sleeve| | 84T16303
26| Washer| | 5XJ569188
27| Pull-out Protector| | 7HT569149
28| Rubber Washer
Metal Washer
| | N56U26
29| Mounting Nut| | BNM56Z55
30| Mounting Screw| | 8RM6X15
31| Allen Key| | 88S25
32| Weight| | 500569167
33| Connector| | A1569X88
34| Washer| | 8XJ1A200D
35| Control Box| | DSA569X50
36| Connector| | 7JT569X54DO
37| Was her| | 8J19X12X25A
*Denotes faucet component color options:
SS – Stainless Steel
MB – Matte Black
GG – Gunmetal Grey
CUSTOMER SUPPORT
Karran USA
Tel: 866.452.7726 www.karran.com |
info@karran.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>