dprofy V3M Magnetic Wireless Golf Speaker User Manual

dprofy

V3M Magnetic Wireless Golf Speaker
User Manual

Note: *It can be any letter, representing different version numbers.

INTRODUCTION

HOW TO CONNECT

1. Long press the power on/off button and it will be in Bluetooth mode the Blue indicator flashes

Connect to your device Setting>Bluetooth>Choose device >dprofy V3M-* Connected successful Blue indicator steadily on

FUNCTIONS

Note:

1. Short press the Mode switch button, and you can switch between Bluetooth playing/Micro SD playing/Aux cable playing.
2. If the device is dead, please long press the POWER ON button for at least 8 seconds to reset.
3. Answer/reject call button, short press for answering, long press for rejecting.
4. Support Micro SD card max 32Gb.

IPX6: No harm for 3-5 minutes of water flushing, but don’t soak!

TWS PAIRING

TWS: True Wireless Stereo

Through Bluetooth connection, the same 2 speakers will automatically identify opposite and the left and right channels will automatically switch, and combine into stereo. 1 plus 1 combined to use, double sound effect(2 speakers connected to 1 motile phone at the same time, play music synchronously.)

1.  After the two speakers are turned on, the speakers will enter Bluetooth mode(the indicator light flashes ). Long press the CI button of any speaker, and the speakers will enter Bluetooth pairing mode; When the prompt tre-Di Di-sounded ( it is the main speaker ), the speaker will automatically search for another speaker.
2. Speakers will be in TWS mode when you hear a prompt tone(the main speaker ), which means pairing successfully between 2 speakers. The blue indicator of the main speaker flashes and the blue indicator of the auxiliary speaker keeps on. (The main speaker is the left channel, and the auxiliary speaker is the right channel.)
3. After pairing successfully 2 speakers, the volume of the main speaker and auxiliary speaker is synchronous. The button of the main speaker and auxiliary speaker can control the next/last track and pause on TWS mode.
4. Open the Bluetooth of the mobile, search and connect the main speaker,th1 blue indicator of the main speaker will keep on after connecting successfully.

Note: The above is the manual pairing version connection method, the automatic pairing version does not need to be connected, and the two speakers are automatically paired after they are turned on.

OTHER

Charging
I Use a USB cable to connect to a computer or buy a USB charger separately.

connected to aux-in devices
Low power indicator flashes| Battery voltage lower than 3.3V, Red light flashes means your speaker needs to be charged
Red charging indicator light| The red indicator is on when charging, and off when fully charged.

Note: Your speaker will power off automatically within 15 minutes if you did not pair it with playback devices in order to save energy.

SPECIFICATIONS

CONTAIN

WARRANTY POLICY

 Your Bluetooth speaker is covered by a limited warranty. It is backed by 1-year performance warranty against any manufacturing defects in material or workmanship from the date of original purchase. This warranty entitled the purchaser to get the product repaired or replaced under the following
conditions:

• The warranty applies to the original purchaser, Proof of original purchase is required
• The warranty does not cover the damage caused by misuse, abuse, or improper storage.
• In no event shall Gsou be responsible for any direct, incidental, consequential, or other damages of any kind.

WARNING

|
---|---
|

The company reserves the right to product modification for appearance and function which is subject to change without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>