HALCYON P450 1PNL LED High Bays Instruction Manual

June 10, 2024
HALCYON

HALCYON P450 1PNL LED High Bays

INSTALLATION INSTRUCTIONS

  • Product Name: LED High Bays
  • Model#: P448 1 PNL • P449 1 PNL • P450 1 PNL • P450 1 P65KL
  • Description: P448 1 PNL 100 Watt LED, Non-dimmable, IP65, 4000K P449 1 PNL 150 Watt LED, Non-dimmable, IP65, 4000K P450 1 PNL 200 Watt LED, Non-dimmable, IP65, 4000K P450 1 P65KL 200 Watt LED, Non-dimmable, IP65, 6500K
  • Rated Voltage: 220-240V~, 50/60Hz

HALCYON P450 1PNL LED High Bays-FIG2

  1. Turn power off.
  2. Install the suspension kit.
  3. Plug in the power cord.
  4. Switch luminaire on to test luminaire functions correctly and is electrically safe.

Installation note:
Do not install on the same circuits as Metal halide, Fluorescent and other “Low power factor” devices. When installed on the same circuit it can cause flickering and/or premature failure of the “high power factor” electronic drivers. The harmonic distortion from low power factor devices alters the Waveform of the AC supply which can cause componentry in high power factor electronic drivers to resonate, run over temperature and fail after prolonged exposure.

WARNING: FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED CLOSE TO CURTAINS OR OTHER COMBUSTIBLE MATERIALS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HALCYON User Manuals

Related Manuals