HALCYON P450 1P65KL LED High Bays Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON P450 1P65KL LED High Bays
INSTALLATION INSTRUCTIONS
- Product Name: LED High Bays
- Model#: P448 1 PNL • P449 1 PNL • P450 1 PNL • P450 1 P65KL
- Description: P448 1 PNL 100 Watt LED, Non-dimmable, IP65, 4000K P449 1 PNL 150 Watt LED, Non-dimmable, IP65, 4000K P450 1 PNL 200 Watt LED, Non-dimmable, IP65, 4000K P450 1 P65KL 200 Watt LED, Non-dimmable, IP65, 6500K
- Rated Voltage: 220-240V~, 50/60Hz
- Turn power off.
- Install the suspension kit.
- Plug in the power cord.
- Switch luminaire on to test luminaire functions correctly and is electrically safe.
Installation note:
Do not install on the same circuits as Metal halide, Fluorescent and other
“Low power factor” devices. When installed on the same circuit it can cause
flickering and/or premature failure of the “high power factor” electronic
drivers. The harmonic distortion from low power factor devices alters the
Waveform of the AC supply which can cause componentry in high power factor
electronic drivers to resonate, run over temperature and fail after prolonged
exposure.
WARNING: FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED CLOSE TO CURTAINS OR OTHER COMBUSTIBLE MATERIALS
Read User Manual Online (PDF format)
Loading......