Liseng

Liseng 448146 Tuya WiFi PIR Motion Sensor

Specifications

• BRAND: Liseng
• COLOR: White
• POWER SOURCE: Corded Electric
• MAXIMUM RANGE: 7 Meters
• OPERATING TEMPERATURE: 0~40C
• PART NUMBER: ‎448146
• PACKAGE DIMENSIONS: ‎7 x 7 x 3.4 cm; 60 Grams
• ITEM WEIGHT: ‎60 g
• OPERATING RANGE: 0 to 40 C

Introduction

This is an intelligent motion sensor that works independently without a hub, can correctly detect movement in the room, press and start the voice instant to defend the security in the home. App: Wi-Fi or mode connection with WiFi one-button setup with Tuyasmart. It can also connect other intelligent items IFTTT. In order to create your own scene and directly share your gadgets with others, it can also connect two devices. You can Run “Smart Life” from the desktop app on your smartphone. Log in and register. To add the device, choose the device type and then “PIR” from the list.

HOW TO TURN OFF A MOTION SENSOR ALARM

Put the resistor back into the breadboard to turn off the alarm. The alert must cease right away, and it will disable itself after two seconds. Now, you have two options: either leave the resistor in place and the alarm will reset, or you may remove it and the alarm will go into standby mode (deactivated).

HOW TO INSTALL A MOTION SENSOR

• Open the motion detector’s box. You should receive mounting hardware and instructions with your motion sensor kit.
• Choose a location….
• Mount the sensor. …
• Connect your system’s sensor to it.
• Your motion detection settings need be adjusted.
• Keep your motion detector working.

HOW TO DISCONNECT A PIR SENSOR

• Unscrew the single screw under the sensor’s bottom to remove the PIR sensor lid.
• In order to prevent it from falling out, carefully remove any plastic “lens” that may be inside the sensor.
• The circuit board can be made loose by removing a single screw.

HOW TO ADD TUYA TO MY HOME ASSISTANT

• Go to the Home Assistant instance you created.
• Press the Settings button in the sidebar.
• From the setting menu select: Devices & Services.
• Click the Add Integration button in the bottom right corner.
• Find “Tuya” in the list and click it.
• To finish the setup, adhere to the instructions displayed on screen.

HOW TO OVERRIDE A MOTION SENSOR SWITCH

• The switch is typically left on all the time.
• The light will stay on if you quickly turn the switch on and off, which displaces motion detection.
• Turn the switch off, wait 10 seconds, then turn it back on to resume regular operation.

Frequently Asked Questions

Describe PIR Tuya.

PIR motion sensors can determine whether or not someone is moving right away. It is broadly applicable to security, incursion monitoring, lighting linking, etc. PIR motion sensor offers no-code Zigbee, SIG Mesh, and Wi-Fi technologies, allowing for quick development and sample delivery.

Can motion detectors trigger without cause?

Several variables can mistakenly set off your motion sensors, including pets and any other activity from heat sources like vents, windows, stoves, or anything that generates a heat change near your sensor. Placing a piece of paper in front of your sensor for three days is the simplest test you can perform to see if it is defective.

What causes a PIR sensor to go off?

Low or unstable voltage at the detector is the primary cause of PIR false alerts. Verify that each PIR’s voltage is over 13VDC and stable. Sudden infrared movement or temperature changes that are visible to the detector are the second reason for false warnings.

Can you hack a motion sensor?

Researchers revealed that hackers can examine your motion sensors, such as an accelerometer and gyroscope, in a report published this week and determine your PIN. The researchers were able to accurately guess a four-digit PIN in 74 percent of the cases after studying the data.

Does PIR operate on glass?

Alarm motion sensors cannot penetrate glass, so no. Passive infrared (PIR) technology is used by the majority of motion sensors to detect motion. Through glass, IR energy changes are difficult to see.

What happens if a motion sensor is covered?

By avoiding their trigger systems, motion sensors can be disregarded. The majority of sensors today use heat (infrared radiation) to set off alerts. Covering the lens of the sensor with an insulating piece of material can easily bypass or block it.

Can walls be penetrated by motion sensors?

They can sense through walls and other obstacles, allowing them to detect motion over vast areas. In addition to being detected at the transmitter site, the radio waves are at frequencies that can pass through the majority of walls.

What is the purpose of a motion sensor?

A motion sensor, sometimes known as a motion detector, is a piece of technology that use a sensor to find nearby individuals or objects. Any security system needs motion sensors as a crucial part. A sensor will alert your security system and, with newer systems, your cell phone when it senses motion.

Do PIR sensors function in the daytime?

When the sunshine begins to fade, their photocell technology recognizes it and turns on the light. While others include a PIR motion sensor, some lights are always on in low light. As a result, the light only comes on at night and when there is movement.

Where should a motion sensor be installed?

The optimal location for a motion sensor is in a room corner with a clear view of your entryways and the ability to quickly identify any changes in the space.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>