V-TAC 801333970 LED Waterproof Lamp Instruction Manual
- June 4, 2024
- V TAC
Table of Contents
V-TAC 801333970 LED Waterproof Lamp
TECHNICAL DATA
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
- Connect 10 units maximum for item VT-160
- Connect 8 units maximum for item VT-170
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Terminal block not included. To be connected with Waterproof Cable Hose
- Proper grounding should be ensured throughout the installation.
This marking indicates that this product should not be disposed of with other household wastes.
INSTALLATION DIAGRAM
- Switch OFF the power before starting the installation.
- Fasten the two mounting clips to installation surface.
- Install the lamp to the mounting clips
- Link the power line to the power source, finishing the interface with authorized insulating tape.
- Hanging installation type reference. (FIG 2)
- Switch ON the power to test the light.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>