HARMAN WAVE200TWS True Wireless Earbuds User Guide

HARMAN WAVE200TWS True Wireless Earbuds

Product Information

The product is a Bluetooth headset with the model number WAVE200TWS JBL. The manufacturer is Harman International Industries, Incorporated with authorized representatives in different locations such as Amsterdam, The Netherlands and Hemel Hempstead, Hertfordshire, United Kingdom. The product complies with the relevant Union harmonization legislation directive and other applicable regulations such as Radio Equipment Regulations 2017 and Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

Product Usage Instructions

1. Charge the Bluetooth headset using the provided charging cable before using it for the first time. The charging time may vary, but it usually takes around 2-3 hours to fully charge the device.
2. To turn on the device, press and hold the power button until you hear the startup sound. The LED indicator will flash once to indicate that the device is on.
3. To pair the device with your smartphone or other Bluetooth-enabled devices, ensure that the Bluetooth function is enabled on your device. Press and hold the multifunction button on the Bluetooth headset until the LED indicator flashes in pairing mode. Your device should detect the Bluetooth headset, and you can choose to pair it by selecting it from the list of available devices.
4. Once paired, you can use the Bluetooth headset to make and receive calls, listen to music or other audio content from your device. Use the multifunction button to answer or end calls, play or pause music, or skip forward or backward.
5. To turn off the device, press and hold the power button until you hear the shutdown sound. The LED indicator will flash twice to indicate that the device is off.
6. Store the Bluetooth headset in its case when not in use to protect it from damage or dust.

EU DECLARATION OF CONFORMITY

1. Model No., trademark: WAVE200TWS JBL

2. Name and address of the manufacturer’s authorised representative:

   • Harman International Industries, Incorporated
   • EMEA Liaison Office, Danzigerkade 16,1013 AP Amsterdam,The Netherlands

3. This declaration of conformity is issued under the sole responsibility of the manufacturer:

   • Harman International Industries, Incorporated
   • 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES

4. Object of the declaration: Bluetooth headset

5. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation directive and Other Union harmonisation legislation where applicable:
   RED – 2014/53/EU, RoHS – (EU) 2015/863 amending Annex II to 2011/65/EU,

6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared. References must be listed with their identification number and version and, where applicable, date of issue:

   • EN 62479:2010 ,
   • EN 62368-1:2014+A11:2017,
   • ETSI EN 301 489-1 V2.2.3 ,
   • ETSI EN 301 489-17 V3.2.4 ,
   • EN IEC 61000-3-2:2019 ,
   • EN 61000-3-3:2013/A1:2019 ,
   • EN 55032:2015 ,
   • EN 55032:2015/A11:2020，
   • EN 55035:2017 ,
   • EN 55035:2017/A11:2020，
   • EN 300 328 V2.2.2 ,

7. Where applicable, the notified body … (name, number) … performed … (description of intervention) ….. And issued the EU-type examination certificate: …

8. Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:

9. Additional information:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>